I have been following the the development of Vyatta over the course of
about the past year and have been really excited to see it progress.
As a Network Engineer for that last 7 years I have been brought up on
IOS and over the past 2 years or so I have been learning JunOS.
Initially with previous
Hi there,
Thank you for your email. I am currently away on reservist and will only be
back on the 3rd March 2008.
My access to email during this period will be limited.
If there is any urgent matter that require attention, please contact Choon Kiat
([EMAIL PROTECTED]) during this period and cc
Hi Venkat,
In my experience the handoff depends largely on your carrier, the
facilities in your building, and where you are in the world. I would
start out by finding out what the facilities look like at your site and
that will go a long way towards answering what your options are. A
quick walk
That depends on your provider. You will have to contact your provider
to see how they can deliver and what they can deliver. But basically you
get a demarc and you are required to extend or have them extend it to
the network interface.
I personally would not look at a legacy T3 or OC12 as
Thank you for the very detailed response and you have made some of my
first impressions fears fade away.
Great to hear that you are planning on providing customization to
vbash. It is not a bad shell, it just seems odd to combine bash with
my router configuration. I was afraid of tab-completion
Reminder: Vyatta is closing this community mailing list and moving it to a
forum and mailing list that is available through the Vyatta community website
at http://www.vyatta.org.
Please move all active discussions over there as soon as possible.
Note: For those of you who prefer the mailing
Okay, with VC4 Alpha 2 just out the door earlier this week, it's time to
turn up the heat on testing. From the feedback we have been receiving, it's
clear that some people are actively working with VC4 Alpha 1, and hopefully
now Alpha 2.
To thank you for the help you're providing by exposing
7. The contest starts at 2:30 PM USA Pacific Standard Time on
Feb 27 and runs through 11:59 PM USA Pacific Standard Time on
March 22.
I clarified this when I posted it to vyatta.org, but sent this out too
quickly...
All dates/times are in 2008. I figured that was obvious, but I'm sure
Robyn-
It worked like a charm. Thanks a lot. I was unable, however, to get
the rc.local to work correctly but I'll talk to my system admin about that.
Ben
___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
Brandon Bennett wrote:
Great to hear that you are planning on providing customization to
vbash. It is not a bad shell, it just seems odd to combine bash with
my router configuration. I was afraid of tab-completion issues and
accedental commands being ran (or overlapping)
Hi Brandon,
If
Not hearing you to good or understanding the question.
But vyatta upon save , writes the config down to the config directory
and the file named config.boot. You can also save it to any mounted
device with the save command followed by that full path as long as that
user has write
Some problems when trying Alpha 2
1.- Error when trying install-system to install Alpha2 in a hard disk (I
am using VMWare environment).
2.- I am looking for PPPoE commands are I cannot find them. Any help??
Regards.
Paco.
___
Vyatta-users mailing
1. What error are you seeing?
2. Have you looked at the PPPoE documentation on Vyatta.org?
http://www.vyatta.org/documentation/glendale-alpha2
-- Dave
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paco
Alcantara
Sent: Wednesday, February 27, 2008 4:15 PM
To:
What error did you get with install-system? We have seen some issues with
vmware's scsi hard drive not being recognized, so if that's the issue then
you might try editing the virtual machine to use an IDE hard drive
instead.
stig
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL
I have tried to register at the new web site, but the site seems to have
a problem with a username of 'keith.steensma' (with a period in the
username). And the site seems to refuse to send a password to the
registered email address. I have tried (but the web site refuses) to
re-register as
Try looking in your Spam filter folder. It was there for me.
~Brandon
On Wed, Feb 27, 2008 at 6:58 PM, Keith Steensma
[EMAIL PROTECTED] wrote:
I have tried to register at the new web site, but the site seems to have
a problem with a username of 'keith.steensma' (with a period in the
Hi Brandon,
Thanks again for the response. I just wanted to make one quick comment.
We do try to submit all of our changes and patches back to the
upstreams. It makes our lives much easier on the integration side. If
we don't submit something it's through an oversight as opposed to
anything
Hi All ,
i am newbie to vyatta iPSEC VPN has setup an site - to -site VPN as per
config document of vyatta between 2 vyatta routers . Not able to
establish the VPN and /var/log/messages says
site 1
Feb 28 02:39:44 localhost pluto[3973]: peer-Y.Y.Y.Y-tunnel-1 #691:
initiating Quick Mode
Have you tried adding a proposal 1 with aes256 under esp-group ESP-1E for
site 2 so that the proposals match up?
stig
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Biswajit
Banerjee
Sent: Wednesday, February 27, 2008 7:08 PM
To: vyatta-users
Subject:
Thanks Steve.
Saw this mail quite late.
I had checked /proc/sys/net/ipv4/ip_no_pmtu_disc
earlier, and the value is 0 in that but I am not sure if it works properly.
I am using a commercial conformance test suite for IPv4 which have certain
PMTU cases.
Running it with a windows OS, I can see
Thanks Dave.
That's a nice idea, it would give more flexibility in using Vyatta.
-Piyush
On Tue, Feb 12, 2008 at 1:14 AM, Dave Roberts [EMAIL PROTECTED] wrote:
Piyush,
The answer to this varies by the particular release. Assuming you're
running something VC3 or earlier, then you login
21 matches
Mail list logo