(following my previous post Graeme phoned me and we went through these
checks over the phone)
Hi Graeme,
To sum up what we found - together with a couple of thoughts I've had since:
1) Printer Set-up in OSX:
- we have confirmed that your printer is set-up and showing in the Print
Fax
On 01/02/2010, at 7:45 PM, Neil Houghton wrote:
(following my previous post Graeme phoned me and we went through these
checks over the phone)
Hi Graeme,
To sum up what we found - together with a couple of thoughts I've had since:
1) Printer Set-up in OSX:
- we have confirmed that
Hi Peter,
That is interesting. I didn't think you needed USB activated on the VM to
use the VM printer port (or a Bonjour printer). From your description, it
sounds like you added the printer as a USB printer directly connected to the
virtual machine.
I've never tried that but I understood that
Hi Graeme,
Sorry for the delay in replying to this - it was so long ago since I had
done it that I couldn't remember the details!
However, I have now just done the exercise again on my new iMac with my VM
upgraded for Parallels 5.
It was all really simple (as I remembered) basically:
-
On 26/01/2010, at 10:23 AM, Graeme Winters wrote:
Hi Peter
Thank you for the assistance
I am using Version 4 of Parallels
Only had this system since December after some years with Windows
Please guide me
How do I get to Virtual MachineConfigure?
Graeme
The principle is the same in
Hi Peter
Thank you again for your assistance. For new users this forum is most helpful
I did go into Configure and the Printer rectangle showed Default
I changed this to C5300 Series but this has not made any difference. The
printer is enabled and connected
I still cannot print in Windows mode
Some time ago I listed a problem with this printer scanner in that I could not
scan at all.
For over 2 weeks I have been exchanging emails with HP Support trying various
fixes to allow me to print while in Windows
The position is this
I can now print and also scan while using any Apple
Hi Graeme
Have you tried using the HP utility tool procedure?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00843712tmp_track_link=ot_faqs/top_issues/en_au/c00843712/loc:2lc=endlc=encc=aulang=enproduct=3560275#
Merv
Graeme Winters wrote:
Some time ago I listed a problem with this
Thanks for that Merv
I am using XP not Vista
Graeme
On 25/01/2010, at 9:23 PM, Merv Bond wrote:
Hi Graeme
Have you tried using the HP utility tool procedure?
Hi Graeme
Why don't you contact MYOB explain that you have moved to Apple
you should be able to exchange the Windows programme to AccountEdge
(or FirstEdge) for Apple.
Cheers, Alex
On 25/01/2010, at 6:28 PM, Graeme Winters wrote:
Some time ago I listed a problem with this printer
On 25/01/2010, at 11:47 PM, Alex wrote:
Hi Graeme
Why don't you contact MYOB explain that you have moved to Apple you
should be able to exchange the Windows programme to AccountEdge (or
FirstEdge) for Apple.
Cheers, Alex
Are you able to print at all from Windows? Parallels
Hi Peter
Thank you for the assistance
I am using Version 4 of Parallels
Only had this system since December after some years with Windows
Please guide me
How do I get to Virtual MachineConfigure?
Graeme
On 26/01/2010, at 9:51 AM, Peter Hinchliffe wrote:
On 25/01/2010, at 11:47 PM, Alex
Hi Graeme,
When I started with Parallels 3.0, running Windows XP pro, the printing was
fine - just using the shared Mac printer.
Then, sometime along the way, it stopped working - I don't remember what
triggered it - might have been a software update (OSX, Windows or Parallels)
but at the time
Hi Neil
I have tried your suggestion and installed the Bonjour package
Bonjour is now available at the Start menu in Windows
When I go into the Bonjour Wizard there is no printer available
I have tried going into Add/Remove and done a repair but still no luck
The HP is shared
Have I missed a
14 matches
Mail list logo
