For some reason I get the following values:
soilTemp1: None, soilTemp2: 43.0, soilTemp3: None, soilTemp4: None,
so I have only soilTemp2.
Is it possible to chnge it by software to the soiilTemp1 or should I go to
the garden and change slot for temperature probe?
Thanks Tom for clarification.
On
I had set set record_generation=software
I woke just before 6:30 and checked the log. I found
Oct 30 06:25:17 PWS weewx[3876]: manager: unable to add record 2016-10-30
06:25:00 EET (1477801500) to database 'weewx.sdb': PRIMARY KEY must be
unique
and
Oct 30 06:30:16 PWS weewx[3876]: manager: u
On Sat, Oct 29, 2016 at 12:49 PM, Jacek Skowroński
wrote:
> Hi,
> I have Davis Vatange pro2 with external leaf_soil module located on ID=2.
> So according to help I did such an command
>
> wee_device --set-transmitter-type=2,8,1,1
>
>
> So if I understood it correctly I would have temperature and
On Sat, 29 Oct 2016 12:53:23 -0700 (PDT)
vince wrote:
> remember everybody doesn't switch back to Standard Time tonight - the
> US is next weekend, not 'this' weekend
>
> https://www.timeanddate.com/time/dst/events.html has who changes
> when. Interesting.
Of course if you are in the Southern h
On Sat, 29 Oct 2016 08:52:42 -0700
Thomas Keffer wrote:
> On Fri, Oct 28, 2016 at 10:46 PM, Liz wrote:
>
> >
> > My solution is to leave the weather station on standard time.
> > If I read the console I want to know "right now" or "how much rain
> > to now"
> > Then my server, which runs weewx,
Ralph..good to see another Peet Bros user (not many of us here). I am not a
programmer, but have learned some very basic Linux to tweak my install. One of
the things I like about Weewx is all of the support. Tom, mwall, and many
others always help out,and have developed drivers for stations that
I have very little Linux (or other programming) experience... Decades ago
I did a little Visual Basic programming but that is a dim memory. I have
managed (with the generous help of this forum) to setup and run weewx on a
Rpi3b. WS2080 WU and Motion sending images to WU.
My next project is to
Solved many of the problems and have the Ultimeter 2100 reporting and
WeeWx is now ftp'ing to my website! Next step is to find my one-wire USB
gizmo, get woes running as a service and add some more temperature points.
Thanks mwall
--
You received this message because you are subscribed to t
remember everybody doesn't switch back to Standard Time tonight - the US is
next weekend, not 'this' weekend
https://www.timeanddate.com/time/dst/events.html has who changes when.
Interesting.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To
pi@raspberrypi:~ $ wee_device --info
Using configuration file /etc/weewx/weewx.conf
Using Vantage driver version 3.0.7 (weewx.drivers.vantage)
Querying...
Davis Vantage EEPROM settings:
CONSOLE TYPE: VantagePro2
CONSOLE FIRMWARE:
Date: Jun
Hi,
I have Davis Vatange pro2 with external leaf_soil module located on ID=2.
So according to help I did such an command
wee_device --set-transmitter-type=2,8,1,1
So if I understood it correctly I would have temperature and humidity of
soil on the external temp1 and external hum1.
How to get th
some logs
Oct 29 21:40:50 raspberrypi weewx[8228]: engine: Using archive interval of
300 seconds
Oct 29 21:40:50 raspberrypi weewx[8228]: engine: Using binding 'wx_binding'
to database 'weewx.sdb'
Oct 29 21:40:50 raspberrypi weewx[8228]: manager: Starting backfill of
daily summaries
Oct 29 21:4
At this link there are a couple more listed, beside the Dlink and Linksys
we already know of:
https://github.com/mvp/uhubctl
Il giorno sabato 19 luglio 2014 15:15:43 UTC+2, Robin ha scritto:
>
> The weewx wiki article
>
> What to do when your Fine Offset station locks up
> says
>
> Hubs that a
Hi
I've had problems with my Vantage Vue on time changes before. In the past I had
to clear the logger after the event and then it seemed to work again. What I am
going to do is stop the Weewx service tonight. Then in the morning clear the
data in the logger, the clocks would have changed on the
On Fri, Oct 28, 2016 at 10:46 PM, Liz wrote:
>
> My solution is to leave the weather station on standard time.
> If I read the console I want to know "right now" or "how much rain to
> now"
> Then my server, which runs weewx, looks after all the time changes for
> the display.
> This is also the
Recall, the logger will contain two records with identical local time
stamps.
Weewx does not do the conversion from local time to UTC. The operating
system does. Effectively, weewx asks the OS, please convert the time 0230
6-Nov-2016 local time to UTC. That's no problem most of the year, but
durin
Tom,
OK. I've set record_generation=software.
I'll let you know in the morning how things went.
On Friday, 28 October 2016 18:43:03 UTC+3, Tom Keffer wrote:
>
> On Fri, Oct 28, 2016 at 8:36 AM, Robin >
> wrote:
>
>> That bit I understand Tom. The bit that confuses me is, I thought that
>> WeeW
Hi,
Sorry for questions but .Im a newbie
Don't worry, we all started like that, somewhere.
As you just want to display Apparent Temperature on a weewx generated page
that means we have a few options. You could write a Search List Extension
that calculates Apparent Temperature and would ultim
Thanks for information
I have found wx formulas py.
But I don't understand how to use apptemp on my site.
I don't want archieve it,just show current apptemp on my index.
Sorry for questions but .Im a newbie
H.frelat
--
You received this message because you are subscribed to the Google Groups
"
19 matches
Mail list logo
