Re: [weewx-user] weewx.UnitError

ok it work now. deleted database and create a new one. thanks Le samedi 5 septembre 2020 à 02:59:25 UTC+2, gjr80 a écrit : > Further to what Tom says I see you are using WeeWX-WD, in fact it is one > of the WeeWX-WD databases that is having the unit system problem: > > Sep 4 10:21:57 MacMiniDO

[weewx-user] Re: Added second sensor to AcuRite weather station - can I add data to reports

AcuRite 01536 On Friday, August 28, 2020 at 7:20:17 AM UTC-5 storm...@gmail.com wrote: > What console do you have? > > On Friday, August 28, 2020 at 7:25:19 AM UTC-4, Keith Lakeman wrote: >> >> I have added a second temperature/humidity sensor to my AcuRite weather >> station. I would like to s

Re: [weewx-user] Re: Daily climatological summaries

In addition to Glenn's comments, see the section *How options work * in the Customizing Guide for details on how options specified in weewx.conf override options in skin.conf. On Fri, Sep 4, 2020 at 6:13 PM Glenn McKechnie wrote: > On 0

Re: [weewx-user] Re: Daily climatological summaries

On 05/09/2020, Mikael Fredriksson wrote: > Hi Glenn! > > Can't get the conversion for database units to change. > This is how my skin.conf fill looks now (part under phpunits) > > # Uncomment as appropriate... > Only for the one/s you need. > # Only from the group/s you need. >

Re: [weewx-user] weewx.UnitError

Further to what Tom says I see you are using WeeWX-WD, in fact it is one of the WeeWX-WD databases that is having the unit system problem: Sep 4 10:21:57 MacMiniDOMO weewx[11545] CRITICAL __main__: weewx.UnitError: Unit system of incoming record (0x10) differs from 'archive' table in

Re: [weewx-user] Data not being received from DHT22 Temperature/Humidity Sensor

Tom, Gary Got it working. Now just need to remove about 10 digits after the decimal in the outHumidity and convert the temperature from Celsius to Fahrenheit. Also found that I had to run weewxd as python3 and not python. The code that is working is below, suggestions on the humidity and temperatur

[weewx-user] Re: Images

Thank you. I was in the directory but only saw the skins.conf file. Giving it a shot now. On Thursday, September 3, 2020 at 8:19:24 PM UTC-5 gjr80 wrote: > I will assume you are referring to the Seasons skin. You need to edit > /etc/weewx/skins/Seasons/index.html.tmpl (or it maybe > /home/weew

Re: [weewx-user] Re: TFA Klimalogg PRO on RaspberryPi

Luc, you were right in many respects. I had some success, yet not with tfrec. It always renders "BAD" instead of temperature or humidity. I changed trigger value and gain a lot but found no set of parameters that worked. I ordered another but different SDR stick and we'll see whether hardware was

Re: [weewx-user] Re: Daily climatological summaries

Hi Glenn! Can't get the conversion for database units to change. This is how my skin.conf fill looks now (part under phpunits) # Uncomment as appropriate... Only for the one/s you need. # Only from the group/s you need. # If you don't need a conversion performed then do n

Re: [weewx-user] Weekly page not showing wind gust max data in table

Just realised that the report may not have updated as the graphs for Weekly were updated at 1500 and I have made the changes since. On Friday, September 4, 2020 at 3:51:49 PM UTC+1 Phil Green wrote: > Hello Tom, > I have implemented the tag $seven_day. > The report is working fine for the past s

Re: [weewx-user] Weekly page not showing wind gust max data in table

Hello Tom, I have implemented the tag $seven_day. The report is working fine for the past seven days now, although one thing I spotted for the pressure low for the past seven days occurred at 0345 last Friday morning, not at 0345 today Friday, but it is clear on the plotted data on the graph wha

Re: [weewx-user] Weekly page not showing wind gust max data in table

it sounds like a useful generalisation if it covers cases such as official rain start time each day being 9am - rather than $bod, make it $hour or $offset or similar e.g. $span($day_delta=1, $hour=9) for previous day’s rain and $span($day_delta=0, $hour=9) for today’s rain. i guess it would impl

Re: [weewx-user] Weekly page not showing wind gust max data in table

Yes, that would be the error I outlined earlier. Type 'wind' appears only in the daily summaries. Seven days prior to a moment does not necessarily start at the beginning of a day, so the daily summaries are not always available. But, it makes me think: perhaps tag $span should have an argument th

Re: [weewx-user] Weekly page not showing wind gust max data in table

Hello Tom, I will try $seven_day rather than $week. When I tried $span($day_delta=7) instead of $week I got the errors. I have looked back in my log at the error messages and they are shown below, I have since gone back to using $week Sep 4 11:35:15 Pi3-Weewx weewx[5658] INFO weewx.manager: Adde

[weewx-user] Re: New Google Groups User Interface - Tested

I got a little pup-up today asking me how I like the new Google Groups Hehe... I let them know how terrible it was. On Saturday, August 22, 2020 at 3:09:06 PM UTC-4 vince wrote: > On Friday, August 21, 2020 at 8:10:28 PM UTC-7, Xant wrote: >> >> This kind of disruption is really unecessary

Re: [weewx-user] weewx.UnitError

I suspect you are trying to change the unit system of your database. Once chosen, you cannot change it. See the section *[StdConvert] * of the User's Guide. On Fri, Sep 4, 2020 at 1:27 AM Jym SPRL wrote: > Dear I have these errors. > What can

Re: [weewx-user] Weekly page not showing wind gust max data in table

You didn't post what the "syntax errors" are, so it's hard to evaluate what went wrong. I suspect the problem is a technical one: precisely seven days earlier from the time may or may not lie on the start of a day. If it does not lie on the start of a day, then the daily summaries cannot be used to

Re: [weewx-user] Enabling historical data collection on new install

Patience is a virtue:-) On Fri, 4 Sep 2020 at 12:22, icoj...@gmail.com wrote: > Hi, > > It's a aercus badged device. I have looked at the syslog periodically > since it's been up and running and I'm only seeing writes to the database > on each current loop, shown below, there are no log records

Re: [weewx-user] Enabling historical data collection on new install

Hi, It's a aercus badged device. I have looked at the syslog periodically since it's been up and running and I'm only seeing writes to the database on each current loop, shown below, there are no log records of any other database activity. Sep 4 12:20:30 rasptest weewx[17241] INFO weewx.mana

Re: [weewx-user] Enabling historical data collection on new install

I assume yours is a Maplin badged device? From what I remember when I had the same model it took nearly a day to download a couple of years’ worth of data. Have you looked into the syslog to see what is happening in real time? From the command line run to watch the progress: - sudo tail -f /var/lo

Re: [weewx-user] Weekly page not showing wind gust max data in table

Thanks for the info. Where would I change the $week to $span($day_delta=7) In the actual report file, in my case hilo.inc or in some definition elsewhere to set the aggravation period? I have tried it in hilo.inc changing:- #set $archive_data = [('day', $day), ('week', $week), ('month', $month)

RE: [weewx-user] Enabling historical data collection on new install

Hi, I think I’ve got about 4-5 years worth but the issue is I’m not seeing any of that yet, I don’t see any data prior to yesterday, so I don’t think the process has even started.   Regards From: steeple ianSent: 04 September 2020 11:53To: weewx-user@googlegroups.comSubject: Re: [weewx-user] Enabli

Re: [weewx-user] Enabling historical data collection on new install

Matt, >From previous experience using an HP1000 it takes a long time to download the data stored on your device. How many years worth? -im On Fri, 4 Sep 2020 at 10:13, icoj...@gmail.com wrote: > Hi, > > When I first installed weewx a year ago I noticed that it went through a > process of adding

Re: [weewx-user] Enabling historical data collection on new install

if you were using vantage pro, it would have (pretty promptly) backfilled whatever it had in datalogger memory. i think anything else would require manual intervention, and, of that, the only thing that comes to mind is backfilling from wunderground (using wunderfixer tool) you’ll need to give

[weewx-user] Enabling historical data collection on new install

Hi, When I first installed weewx a year ago I noticed that it went through a process of adding all the historical data over the course of the first few days. This then gave me a good historical picture for trend analysis. I've done a fresh install of 4.1.1 on a separate RPi this week and after

[weewx-user] weewx.UnitError

Dear I have these errors. What can I do? Thanks sudo tail -f /var/log/syslog Sep 4 10:13:19 MacMiniDOMO weewx[11541] INFO __main__: PID file is /var/run/weewx.pid Sep 4 10:13:19 MacMiniDOMO weewx[11545] INFO __main__: Using configuration file /etc/weewx/weewx.conf Sep 4 10:13:19 MacMiniDO