[weewx-user] Re: Request for assistance - GW2000/WS90

Gary, jon@weewx:~$ sudo PYTHONPATH=/usr/share/weewx/user python3 -m api_data --run --i p-address=192.168.10.16 CMD_BROADCAST (12): Sending broadcast packet 'FF FF 12 03 15' to '255.255.255.255:46000' Received broadcast response 'FF FF 12 00 27

[weewx-user] Request for assistance - GW2000/WS90

I'm presently working on adding support for the GW2000/WS90 to the GW1000 driver. Unfortunately the current release (1.6.4) of the Ecowitt gateway API documentation has a number of errors relating to the GW2000/WS90. Whilst I have been able to work around most of these errors, I am uncertain if

[weewx-user] Re: weewx stopped creating new data after power outage

Looks like a clear case of corrupt station memory, not unusual in a vantage station after a power loss. See the wiki article WeeWX generates HTML pages, but it does not update them

[weewx-user] weewx stopped creating new data after power outage

I have been using weewx 4.5.1 more or less continuously since late 2019, running on a Pi zero. I have had occasional problems, but they always seem to be resolved by a restart or a system reboot. There was a power outage yesterday that shut down the power for several hours. After the power came

Re: [weewx-user] Moderation

Actually I would not try posting the same reply repeatedly; what Google sees as spam now will still be seen as spam five minutes later. I have at times seen six, seven or even eight copies of the same post queued in the 'Pending' folder. Just try once, or maybe twice and if nothing appears eith

Re: [weewx-user] Publishing Issue

> Yeah, I can't figure out why WU updates every few seconds WU has a rapid fire setting: See: https://weewx.com/docs/usersguide.htm#Wunderground PWSweather has no such equivalent > If I can figure out how to adjust the Vantage pro hardware setting… See: https://weewx.com/docs/hardware.htm#vantage_

Re: [weewx-user] Publishing Issue

Yeah, I can't figure out why WU updates every few seconds, but PWS waits for the archive every 30 mins. If the PWS update is specifically tied to the hardware archive interval then that makes sense. I guess I didn't notice what the hardware might have been set to when PWS was updating more freq

[weewx-user] Re: wee_config --reconfigure returns UnicodeDecodeError: 'ascii' codec can't decode byte 0xff in position 0: ordinal not in range(128)

It's also related to python2. I installed 4.7 and most of the python3 components on Centos7 forced installed the rpm for EL8. Works good, and of course the config crashes if you use python2, but works with python3. i will be building out a EL8 box soon. On Tuesday, April 19, 2022 at 2:38:2

Re: [weewx-user] Moderation

Ok Thanks, Just try and try agin! On Tuesday, 19 April 2022 at 14:07:52 UTC+1 tke...@gmail.com wrote: > No posts are moderated, but occasionally Google Groups will intern and > quarantine a post that it thinks looks suspicious. There is no way to turn > off this behavior. > > All well and good

[weewx-user] Re: wee_config --reconfigure returns UnicodeDecodeError: 'ascii' codec can't decode byte 0xff in position 0: ordinal not in range(128)

Actually, the fix mentioned in #172 is not in my copy of cheetahgenerator.py. But even after adding it and recompiling it still bombs out. On Monday, April 18, 2022 at 5:05:58 PM UTC-4 matthew wall wrote: > On Monday, April 18, 2022 at 11:11:59 AM UTC-4 kheller2 wrote: > >> File "/usr/lib/p

[weewx-user] Re: WeeWx 4.7.0 and TE923 weather station running on a Pi4. Problem when restarting (sudo /etc/init.d/weewx restart or Pi reboot)

Thanks Gary for feedback. The config archive interval is correct. [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 300 I don't where this '129' val

[weewx-user] Re: WeeWx 4.7.0 and TE923 weather station running on a Pi4. Problem when restarting (sudo /etc/init.d/weewx restart or Pi reboot)

You are going to need to post your weewx.conf, but the error says the archive interval is 129, which is apparently not a supported value. Change that to 300 (for 5 minutes) and see what transpires. Follow this link on how to post a help request: https://github.com/weewx/weewx/wiki/Help!-Posting-

Re: [weewx-user] Moderation

No posts are moderated, but occasionally Google Groups will intern and quarantine a post that it thinks looks suspicious. There is no way to turn off this behavior. All well and good, but it does not always tell the moderators that there is something in quarantine, so a post can languish in purgat

[weewx-user] Moderation

Hi Are post to this group moderated or am I on probationary moderation? I am not seeing any of my posts regarding the new Wittboy and the potential driver here? Thanks Jon -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from t

Re: [weewx-user] Re: EcoWitt GW2000 - anyone working on a driver?

When I compare the rainfall to other close by weather station on wunderground, they've got 21mm to my 32mm. On Tue, 19 Apr 2022 at 20:09, Stephen Hocking wrote: > The phone app & web page is picking up the piezo rain just fine, but weewx > doesn't seem to have any rain logged at all. I'm using

Re: [weewx-user] Re: EcoWitt GW2000 - anyone working on a driver?

The phone app & web page is picking up the piezo rain just fine, but weewx doesn't seem to have any rain logged at all. I'm using the gw1000 driver - would using Werner's gw2000 pick this up? I'm assuming that I won't have to make another mod to weewx.conf beyond what installing the gw1000 has alre

[weewx-user] Rainfall rate simulators

Hi all, Does anyone know of a device that given the appropriate amount of water, can shower what lies below at known rain rates? The piezo rainfall sensor on the WittBoy has what looks like a 5-band graphic equaliser, where at differing bands of rain rates, you can multiply the rate by a constant

[weewx-user] WeeWx 4.7.0 and TE923 weather station running on a Pi4. Problem when restarting (sudo /etc/init.d/weewx restart or Pi reboot)

Hello, After having made a small change to the weewx.conf (station website registration), I experienced problems for restarting, typing "sudo /etc/init.d/weewx restart". Same result when rebooting the PI4. About 20 times, the restart failed with the following syslog messages : Apr 18 19:12:50 w

Re: [weewx-user] Weewx service stops randomly

you will probably get a lot more info from /var/log/syslog than /var/log/messages > On 19 Apr 2022, at 2:12 pm, mup...@gmail.com wrote: > > I'm running weewx 4.5.1 with a Belchertown skin on a Raspberry pi. All was > working fine, but recently the service randomly stops. There is nothing in >