> Yeah, I can't figure out why WU updates every few seconds WU has a rapid fire setting: See: https://weewx.com/docs/usersguide.htm#Wunderground PWSweather has no such equivalent
> If I can figure out how to adjust the Vantage pro hardware setting… See: https://weewx.com/docs/hardware.htm#vantage_notes wee_device --set-interval=MINUTES [config_file] [-y] > On Apr 19, 2022, at 5:46 PM, Douglas Cote <decote1...@gmail.com> wrote: > > Yeah, I can't figure out why WU updates every few seconds, but PWS waits for > the archive every 30 mins. If the PWS update is specifically tied to the > hardware archive interval then that makes sense. I guess I didn't notice what > the hardware might have been set to when PWS was updating more frequently. If > I can figure out how to adjust the Vantage pro hardware setting that might > get things back to how they behaved previously. Thanks for all the assistance. > >> On Sunday, April 17, 2022 at 10:12:58 PM UTC-4 jo...@johnkline.com wrote: >> You must have been using a shorter archive interval when you observed more >> frequent PWS updates. The updates happen, at most, every archive interval. >> There is an option to make them less frequent, by setting post_interval >> (see: https://weewx.com/docs/usersguide.htm#%5B%5BPWSweather%5D%5D). >> >>>> On Apr 17, 2022, at 6:56 PM, Douglas Cote <decot...@gmail.com> wrote: >>>> >>> Previously, I was getting conditions posted to my PWSweather page every >>> minute or so. Now it only updates every 30 minutes, which appears to >>> coincide with the 30 minute archive interval. So, it's at least posting new >>> data to the site but not at the frequency I was expecting. The attached is >>> a filtered syslog showing the PWS publishing events today. I was going to >>> try changing the record_generation parameter to software to see if it makes >>> a difference. Thanks. >> >>> >>> >>>> On Sunday, April 17, 2022 at 6:31:20 PM UTC-4 tke...@gmail.com wrote: >>>> I'm not following. What is the odd behavior? That all sounds normal. >>>> >>>>> On Sun, Apr 17, 2022 at 11:31 AM Douglas Cote <decot...@gmail.com> wrote: >>>>> Thanks very much. I got it to send updates to PWS but still seeing some >>>>> odd behavior. I think the 30 minute interval is the default in the VPro2 >>>>> and have no need to change it. The other thing I noticed is the PWS >>>>> update will only send when archive processing runs. Thanks again. >>>>> >>>>>> On Saturday, April 16, 2022 at 1:31:00 PM UTC-4 tke...@gmail.com wrote: >>>>>> This is a good example of why it's so important to include the log. >>>>>> >>>>>> Your problem is corrupted memory in your Vantage logger. It has nothing >>>>>> to do with PWSWeather. If you take a close look, you'll see that your >>>>>> HTML pages are not getting updated either. >>>>>> >>>>>> To fix, see the wiki section WeeWX generates HTML pages, but it does not >>>>>> update them. >>>>>> >>>>>> Incidentally, your archive interval is 30 minutes. Did you want it that >>>>>> long? >>>>>> >>>>>> -tk >>>>>> >>>>>>> On Sat, Apr 16, 2022 at 9:32 AM Douglas Cote <decot...@gmail.com> wrote: >>>>>>> Attached an updated log. The most recent start events are around 12:21 >>>>>>> PM ET. I can see it reference posting to PWSweather but doesn't seem to >>>>>>> actually do it. Thanks. >>>>>>> >>>>>>>> On Saturday, April 16, 2022 at 10:37:28 AM UTC-4 tke...@gmail.com >>>>>>>> wrote: >>>>>>>> Everything looks normal. >>>>>>>> >>>>>>>> How about a little more of the system log? Make sure debug=1, then >>>>>>>> stop and restart weewxd. Wait until the first reporting cycle is >>>>>>>> finished (usually 5 or 10 minutes), then post the log from startup. >>>>>>>> >>>>>>>>> On Sat, Apr 16, 2022 at 6:46 AM Douglas Cote <decot...@gmail.com> >>>>>>>>> wrote: >>>>>>>>> Thanks. I can't see where the issue is but I've attached debug output >>>>>>>>> and a bit of syslog. >>>>>>>>> >>>>>>>>>> On Thursday, April 14, 2022 at 6:39:38 AM UTC-4 tke...@gmail.com >>>>>>>>>> wrote: >>>>>>>>>> Hard to debug without seeing the log. >>>>>>>>>> >>>>>>>>>> Most likely you have a configuration problem. Take a careful look at >>>>>>>>>> the [StdRESTful] section of weewx.conf. In particular, the >>>>>>>>>> [[PWSweather]] subsection. Is it enabled? Is the station and >>>>>>>>>> password correct? >>>>>>>>>> >>>>>>>>>> Also, make sure you have the number of brackets "[[..]]" correct. Is >>>>>>>>>> it running on into the next subsection? >>>>>>>>>> >>>>>>>>>> -tk >>>>>>>>>> >>>>>>>>>>> On Wed, Apr 13, 2022 at 7:44 PM Douglas Cote <decot...@gmail.com> >>>>>>>>>>> wrote: >>>>>>>>>>> After upgrading to weewx 4.7.0, it seems I can only publish to >>>>>>>>>>> Weather Underground whereas before I was publishing to PWSweather >>>>>>>>>>> as well. I thought maybe because I had tried to add OpenWeatherMap >>>>>>>>>>> as another publishing location it broke the PWS RESTful service. >>>>>>>>>>> When I commented out the user.owm.OpenWeatherMap RESTful service >>>>>>>>>>> definition and restarted weewx it was still refusing to publish to >>>>>>>>>>> PWS. I did have debug = 3 set for a bit but when looking at the >>>>>>>>>>> output, weewx isn't even attempting to publish to PWSweather...it's >>>>>>>>>>> ignoring it completely. Anyone see this behavior before? >>>>>>>>>>> >>>>>>>>>>> Thanks, >>>>>>>>>>> Doug >>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>>> Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/c16fea41-b95f-4956-9efd-55cd03e9019bn%40googlegroups.com. >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>> >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/be6099b7-f84c-4738-9300-d5e475649230n%40googlegroups.com. >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>> an email to weewx-user+...@googlegroups.com. >>>>>> >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/631a7bca-ed25-4181-a39b-14f082492b0en%40googlegroups.com. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to weewx-user+...@googlegroups.com. >>>> >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/1f56c882-b19b-4a7b-8dcc-74e911bd1819n%40googlegroups.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to weewx-user+...@googlegroups.com. >> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/9cdf69c2-440b-49b3-9d2d-e04cc4f3a251n%40googlegroups.com. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/b28f9a10-9f9c-4841-a5dc-65d105a779ddn%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8003F77F-B760-4B3C-B76F-456726589CBE%40johnkline.com.
