[weewx-user] Upgraded to Vantage Pro2 From Fine Offset USB and Now No ISS Signal

I have been running WeeWX on a Raspberry Pi 3 for a while now with a Fine Offset USB Station (an Aercus Instruments Ws3083 Pro) very successfully. I decided to update to a Vantage Pro2 Wireless. The update went well. After setting up the station I stopped WeeWX ran sudo wee_config --reconfigur

[weewx-user] Re: Upgraded to Vantage Pro2 From Fine Offset USB and Now No ISS Signal

If you look closely the blue line stops when I disconnected the Fine Offset Station and connected the Vantage. On Tuesday, May 15, 2018 at 5:46:57 PM UTC+1, iss

Re: [weewx-user] Re: Upgraded to Vantage Pro2 From Fine Offset USB and Now No ISS Signal

There is no such line in the log or anything similar (I view the log with sudo tail -f /var/log/syslog - I assumes thats ok) My weewx.conf does contain the following [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the sta

Re: [weewx-user] Re: Upgraded to Vantage Pro2 From Fine Offset USB and Now No ISS Signal

On Tuesday, May 15, 2018 at 7:30:32 PM UTC+1, iss@gmail.com wrote: > > There is no such line in the log or anything similar (I view the log with > sudo tail -f /var/log/syslog - I assumes thats ok) > > My weewx.conf does contain the following > > [StdArchive] > > # If the station hardwar

Re: [weewx-user] Re: Upgraded to Vantage Pro2 From Fine Offset USB and Now No ISS Signal

Now working. Many thanks John -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.goo

[weewx-user] Memory On Vantage Pro2 with USB Data Logger

I have Googled but can't find the answer! I have set the update time to 5 minutes. How long before the memory gets full and do I need to do anything about it when it does. I presume when it gets full the older data will be overwritten. John -- You received this message because you are subsc

[weewx-user] Raspberry Pi 3, Time Set Wrong On Power Up Vantage Pro2

I am running WeeWX on a Raspberry Pi 3 connected to a Vantage Pro2 Station. If I power down the Pi, when I power it back up the time on the Vantage Pro is incorrect and is set to the time the Pi was powered down. This, I assume, is due to the fact the Pi does not have a RTC and gets its time f

[weewx-user] Re: Raspberry Pi 3, Time Set Wrong On Power Up Vantage Pro2

I was hoping for a simple software solution like inserting a delay into the WeeWX startup routine to give the Pi time to Gert the correct time John On Wednesday, May 23, 2018 at 2:25:45 PM UTC+1, Andrew Milner wrote: > > The simplest, easiest and best way is to get a RTC module for the RPi. >

[weewx-user] Re: Raspberry Pi 3, Time Set Wrong On Power Up Vantage Pro2

Ok - many thanks for you advice. Looking on amazon.co.uk could you recommend one of the RTCs listed there. It needs to work with a Raspberry Pi 3 Again many thanks John On Wednesday, May 23, 2018 at 2:56:23 PM UTC+1, Andrew Milner wrote: > > Nearly all the software 'solutions' have a downside o

Re: [weewx-user] Re: Raspberry Pi 3, Time Set Wrong On Power Up Vantage Pro2

Many thankd -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.