Note from the datasheet that it measures both pressure and temperature, and
has correction constants built in, but correction must be applied
externally.
On Sunday, January 22, 2017 at 10:55:11 PM UTC-8, David Morgan wrote:
>
> I have been able to photograph and read the sensor in my unit.
On Wednesday, January 18, 2017 at 4:24:16 PM UTC-8, David Morgan wrote:
>
>
>> I also got a Costco Acurite 01536-RX for Christmas.
> . I am curious if anyone knows yet what sensors are used. I have
> resisted peeking so far, but that may change.
>
I have been looking I photos I took
On Wednesday, January 18, 2017 at 4:24:16 PM UTC-8, David Morgan wrote:
>
>
>>
> The barometric pressure is way wrong on the console, and there is some
> disagreement between the console and the WeeWx display. I am curious if
> anyone knows yet what sensors are used. I have resisted
On Wednesday, January 18, 2017 at 7:24:16 PM UTC-5, David Morgan wrote:
After getting it running, I found I can use Wireshark to look at the
> serial interface (after enabling a kernel module), would have been nice to
> know that earlier.
>
there are a few threads in this forum, as well as
I'm using a raspberry pi 2. I did hack together a USB cable power combo and
power the unit from that. Why they don't take power over USB out of the box
is beyond me...
On Jan 4, 2017 11:23 AM, "Brian Champion-Wescott"
wrote:
> Marcus,
>
> What hardware are you using for
Marcus,
What hardware are you using for your AcuRite 01536? I have tried using a
few different Linux distros on regular laptops, without any luck. Are you
using a Raspberry Pi?
Thanks,
Brian
On Sunday, December 25, 2016 at 2:17:58 PM UTC-5, Marcus Watkins wrote:
>
> For Christmas today I
Yea, I'm actually going to have to take my comment back. Windspeed and
direction are working fine now. Just setting it up, sorry about the false
alarm.
On Saturday, December 31, 2016 at 6:05:52 PM UTC-7, Marcus Watkins wrote:
>
> My wind speed and direction works with no adjustments...
>
> On
wind speed and direction work for me. In weewx no direction is shown if
speed is zero. You getting speed and direction on the console?
On Friday, December 30, 2016 at 9:00:29 PM UTC-8, Jeffrey Forbes wrote:
>
> I got the same unit from Costco and I have been able to get it to work
> with
I got the same unit from Costco and I have been able to get it to work with
weewx; however, I am not getting wind speed and direction.
Is that working for you?
Jeff
On Thursday, December 29, 2016 at 12:14:57 AM UTC-5, Scott Beard wrote:
>
> Marcus,
>
> I have been running one of these units
1536 on the left and 2064 on the right. The consoles lock up after 6 or so
months of operation. This year going to hard reset
both consoles at the end of the year, so maybe the rain total will remain
correct for at least the spring rain season. When I get time to get one of
the bmp
Marcus,
I have been running one of these units with weewx on a RPI3 since mid
October. The console is telling me the log is full and to connect it to
the PC to clear it out. It has been telling me that since 12 days after I
set it up. But it still works fine with weewx. From what I can
On Sunday, December 25, 2016 at 2:17:58 PM UTC-5, Marcus Watkins wrote:
>
> For Christmas today I received an Acurite 01536 5-in-1 weather station
> with USB connection (from Costco). I set it up with weewx and was excited
> to see it works out of the box for the most part.
>
> One difference
12 matches
Mail list logo