Just the separate anemometer. I believe most folks (me) want to remote mount
the anemometer to get better wind readings so you buy the transmitter and then
plug your existing anemometer to the transmitter and mount ti somewhere. The
transmitters are standard and can be used with many
Hmmm, the console's manual is pretty clear that you can have an anemometer
associated with the ISS, *or* a separate anemometer, but not both.
[image: image.png]
Tom, are you getting signals from both anemometers? Or, just the one on the
independent unit?
-tk
On Mon, Nov 2, 2020 at 2:53 PM
I have the same setup. I did not add anything to weewx.conf. All I did was
tell the envoy what ID 2 was in the envoy setup. Once I set ID 2 to anemometer
the wind data showed up. My assumption is once the envoy knows that ID2 is
wind it sends the appropriate data via the logger. Tom is
It is my understanding that a console (or Envoy) can have max one ISS, or
one anemometer. That is a Davis hardware limitation.
Give them a call to be sure.
On Mon, Nov 2, 2020 at 1:49 PM orangegecko wrote:
>
> Hi, I am running weewx on a rpi and was wondering if there is a way to
> have my
Hi, I am running weewx on a rpi and was wondering if there is a way to have
my wind sensor data show up on the weewx weather page. the anemometer is
on its own wireless transmitter (id 2) and is currently showing 0 for all
data.
the rpi is connected to a wireless weather envoy and usb data