Re: [weewx-user] upgrading from 2.0 to 3.6

Hi, bin/user/schemas.py is a file that existed under weeWX 2.x but was removed in weeWX v3.0.0 (and onwards). I presume you edited setup.cfg to change the home directory? I am no expert on the setup.py installer, Tom and Matthew are better versed, but you haven't somehow ended up running the

Re: [weewx-user] upgrading from 2.0 to 3.6

I am trying to do something similar, upgrading from 2.01 to 3.8 using setup.py. After unpacking the tarball and editing the setup.cfg file the build goes ok but the install stops with this error: error: can't copy '/home/jen/weewx-3.8.0/bin/user/schemas.py': doesn't exist or not a regular file

Re: [weewx-user] upgrading from 2.0 to 3.6

Just discovered my Vantage Data Logger has ATTRS{idProduct}=="ea61", instead of "ea60" in the udev rules supplied with the .deb package. I'm using it with an Davis Envoy, instead of a Console. But I suppose the product ID should be set with the data logger itself. On Sunday, January 22, 2017

Re: [weewx-user] upgrading from 2.0 to 3.6

Yes, it was fairly uneventful. I installed with .deb package and went though the weewx.conf to make sure everything was correct. Now with the basic function working, I'll start to play with the new features like RapidFire and rsync. I'll also make sure the setup will survive a reboot. DS On

Re: [weewx-user] upgrading from 2.0 to 3.6

And otherwise, it went OK? -tk On Sun, Jan 22, 2017 at 12:35 PM, tds wrote: > OK, I did the migration today. My weewx.sdb was about 74MB. It only took > the manager a bit over 10 minutes to finish the backfilling. The process > started at 22:13:07 and finished at

Re: [weewx-user] upgrading from 2.0 to 3.6

OK, I did the migration today. My weewx.sdb was about 74MB. It only took the manager a bit over 10 minutes to finish the backfilling. The process started at 22:13:07 and finished at 20:24:37. Jan 22 20:24:37 wxpi weewx[3224]: manager: Processed 442781 records to backfill 1539 day summaries in

Re: [weewx-user] upgrading from 2.0 to 3.6

On Friday, 20 January 2017 10:53:44 UTC+10, vince wrote: > > > Older model pi had issues completing it successfully, but I'm > guessing/hoping a pi3 has enough horsepower that it'll succeed. Be very > patient during the conversion process. > IIRC the main issue with the older RPi (other than

Re: [weewx-user] upgrading from 2.0 to 3.6

On Thursday, January 19, 2017 at 4:22:50 PM UTC-8, Tom Keffer wrote: > > Would it be better if I allow the database upgrade to finish before I >> connect the weather station (Vantage Pro 2 + Envoy) or it doesn't really >> matter? >> > > Copy your old weewx.sdb file to

Re: [weewx-user] upgrading from 2.0 to 3.6

> > Would it be better if I allow the database upgrade to finish before I > connect the weather station (Vantage Pro 2 + Envoy) or it doesn't really > matter? > My suggested sequence. This assumes you are using the setup.py install method (Debian install was not introduced until V2.2) and that

Re: [weewx-user] upgrading from 2.0 to 3.6

I'll report back when I finish the upgrade. Just ordered the Pi, RTC, etc. So it may take some time, depending on my schedule. Would it be better if I allow the database upgrade to finish before I connect the weather station (Vantage Pro 2 + Envoy) or it doesn't really matter? I didn't really

Re: [weewx-user] upgrading from 2.0 to 3.6

This will be a good test of the automatic upgrade. :-) Unless you are using an extension, or have done a searchlist extension, it should just work. Note that there is no longer a statistical summary file (stats.sdb). Instead, the daily summaries are now included inside the weewx.sdb file. So,

[weewx-user] upgrading from 2.0 to 3.6

Hi, I'm planning on installing the latest weewx 3.6 on a new machine (Raspberry Pi). I've been running 2.0 on another machine for almost five years and would like to to keep my weewx.sdb. Will it work by simply coping the weewx.sdb from 2.0 to the 3.6 installation? Thanks, TDS -- You