Looking for a waterproof 3 position male/female connector assembly similar to
the RJ45 assembly for an ARC Wireless enclosure. Needs to fit a 14/3 outdoor
cable coming from a streetlight photocell adapter.
Any suggestions?
If you just want to get the cable in use the stuff that comes with the
enclosure. 14/3 should fit in there. If not, any electrical supply
house should have similar device.
If you want a plug/jack, I would go to the nearest electrical supply
house and ask them what they have that will fit the
This might be of interest.
http://www.fpolc.com/featured_products.htm
On 3/6/2011 1:32 PM, Jerry Richardson wrote:
Looking for a waterproof 3 position male/female connector assembly
similar to the RJ45 assembly for an ARC Wireless enclosure. Needs to
fit a 14/3 outdoor cable coming from a
Just a caution here, I doubt that the ARC enclosure is rated for 120V
outdoor use.
On 3/6/2011 4:32 PM, Jerry Richardson wrote:
Looking for a waterproof 3 position male/female connector assembly
similar to the RJ45 assembly for an ARC Wireless enclosure. Needs to
fit a 14/3 outdoor cable
Why wouldn't it be? It's metal inside on all surfaces.
- Jerry
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Scott Reed
Sent: Sunday, March 06, 2011 2:07 PM
To: WISPA General List
Subject: Re: [WISPA] 110 input for ARC enclosure
Just a caution here, I doubt
wouldn't it be? It's metal inside on all surfaces.
- Jerry
*From:*wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]
*On Behalf Of *Scott Reed
*Sent:* Sunday, March 06, 2011 2:07 PM
*To:* WISPA General List
*Subject:* Re: [WISPA] 110 input for ARC enclosure
Just a caution here, I
:10 PM, Jerry Richardson wrote:
Why wouldn't it be? It's metal inside on all surfaces.
- Jerry
*From:*wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]
*On Behalf Of *Scott Reed
*Sent:* Sunday, March 06, 2011 2:07 PM
*To:* WISPA General List
*Subject:* Re: [WISPA] 110 input for ARC
Subject: [WISPA] 110 input for ARC enclosure
Looking for a waterproof 3 position male/female connector assembly similar to
the RJ45 assembly for an ARC Wireless enclosure. Needs to fit a 14/3 outdoor
cable coming from a streetlight photocell adapter.
Any suggestions
To: WISPA General List
Subject: Re: [WISPA] 110 input for ARC enclosure
Actually, right after sending the last e-mail, I thought, the weatherproofing
may be the problem. Yes it is all metal inside, but the 2 pieces are not bonded
to each other when you put in the gasket. No way to ensure a low
Wireless Broadband
- Original Message -
From: Frank Crawford
To: WISPA General List
Sent: Sunday, March 06, 2011 5:04 PM
Subject: Re: [WISPA] 110 input for ARC enclosure
This might be of interest.
http://www.fpolc.com/featured_products.htm
On 3/6/2011 1:32 PM, Jerry
10 matches
Mail list logo