[wsjt-devel] Hopping randomness

Would it be good/better if the next hop choice was random order amongst your bands instead of just a continuously random band? This way you'd be guaranteed to visit each band in an N-transmit * N-bands period instead of Las Vegas odds where you can get bad runs and never touch a band for quite a

Re: [wsjt-devel] Clear Average crash with r5602

Thanks, Joe! No crash with the window open. Charlie -Original Message- From: Joe Taylor [mailto:j...@princeton.edu] Sent: 13 June 2015 13:11 To: WSJT software development Subject: Re: [wsjt-devel] Clear Average crash with r5602 Hi Charlie, While testing r5602 in Echo mode, I found

Re: [wsjt-devel] Reinstall error

On 13/06/2015 09:18, Guy G4DWV/4X1LT wrote: Hi Guy, Bill Somerville g4wjs@... writes: It looks like you are trying to install WSJT-X in C:\Program Files (x86)\, if so why? Mni tnx, 73 Bill G4WJS. -- I have

Re: [wsjt-devel] Echo Modes r5586/r5592

Hi Bill I built r5602 yesterday and tried this morning. Tested on my Vista machine and Halt now behaves fine. It also cancels Echo mode transmissions, which it did not do before. Only observation is that the TX Enable disarmed message does not change when TX Enable is in the red state. 73

[wsjt-devel] Clear Average crash with r5602

Hi All While testing r5602 in Echo mode, I found that 'Clear Average' reliably crashes the program. Same behaviour in JT4. Recipe is start the program in JT4 or Echo and press Clear Average. Have not tried other modes. No such problem with r5586. 73 Charlie

Re: [wsjt-devel] Reinstall error

Bill Somerville g4wjs@... writes: It looks like you are trying to install WSJT-X in C:\Program Files (x86)\, if so why? Mni tnx, 73 Bill G4WJS. -- I have always installed WSJT-X there without any issues until

Re: [wsjt-devel] -5578 dual WSPR and JT65/9 use via two instances.

You can adjust the left edge of the waterfall in the WSPR instance That's the Start XXX Hz entry. Just set it to 700 Hz. Then you can adjust the Bins/Pixel to only see the WSPR band too. 73 Mike W9MDB -Original Message- From: Mike [mailto:m...@urlme.net] Sent: Saturday, June 13,

Re: [wsjt-devel] Reinstall error

Bill Somerville g4wjs@... writes: Since Microsoft started using the NTFS file system, installing software into the Program Files (x86) or Program FIles on x86_64 systems is not a good idea unless the application specifically needs the elevated privileges granted by by being there. These

[wsjt-devel] r5604

Hi All Pleased to report all good with r5604 here. Made one JT4 QSO and tested out echo mode before losing the moon. Thanks! Charlie -- ___ wsjt-devel mailing list

[wsjt-devel] -5578 dual WSPR and JT65/9 use via two instances.

Hi, Is there any way two instances of WSJTX can share the same audio on 30 meters with one of them receiving the audio shifted by 700 Hz ? I run a JT65/9 monitor - it sits on 10.138 MHz, the WSRP region is 700 Hz above that yet with another instance of WSJTX monitoring it always (as

Re: [wsjt-devel] Dial Freq with red background

Hi Bill Thanks for the explanation. I get the red background very occasionally. One recipe that works for me (with r5586) is to press Halt TX during a TX period. At t=50s dial frequency background goes from black to red. The displayed frequency is the same. Communication with the rig is not

Re: [wsjt-devel] wsjtx r5603 - Forces antenna selection

On 13/06/2015 11:46, Josh Rovero wrote: Hi Josh, I use a Yaesu FT-950 for HF operations, and always select Antenna 2 for both receive and transmit through an external LDG autotuner. Since WSPR-2 has been added to wsjtx, I've been using that mode most of the time. WSPR-2 transmissions use the

Re: [wsjt-devel] Reinstall error

On 13/06/2015 18:34, Guy G4DWV/4X1LT wrote: Bill Somerville g4wjs@... writes: Since Microsoft started using the NTFS file system, installing software into the Program Files (x86) or Program FIles on x86_64 systems is not a good idea unless the application specifically needs the elevated

Re: [wsjt-devel] Reinstall error

On 13/06/2015 20:50, Guy G4DWV/4X1LT wrote: Bill Somerville g4wjs@... writes: Is it possible that WSJT-X was running when you installed the new version? -- Hi Bill, Hi Guy, This is the first thing that I thought of,

Re: [wsjt-devel] Reinstall error

Bill Somerville g4wjs@... writes: Is it possible that WSJT-X was running when you installed the new version? -- Hi Bill, This is the first thing that I thought of, so I rebooted and got the same error. That really foxed

[wsjt-devel] Yaesu VFO A/B ANT 1/2

After manually setting all bands VFO A/B to ANT 2, and turning off Split in WSJT-X, all is well with the FT-950. Normal ops on WSJT and WSPR modes with r5604. Live and learn :-) -- P.J. Josh Rovero Ham Radio: KK1D http://www.roveroresearch.