This looks very similar to what I'm seeing here in Dallas, Texas. I see
many people receiving my signal in NA and EU, but I'm not decoding much. I
think there are a lot of unattended stations sending reports to the PSK
Reporter.
On Thu, 29 Nov 2018 at 02:00, Tom Ramberg via wsjt-devel <
wsjt-devel
On 11/28/18 3:11 PM, Mike Saeger wrote:
Hi Mike & all,
Yes, I could wideband the transceiver. I still don't understand why
after a transmission on 5.358.500 a CAT signal is being sent to the
radio to change frequency to 5.358.308 if I put 5.358.500 in the
frequency dropdown box and I turn off
There were a few times I wasn't watching JT-Alert where I started a
reply, then caught it a few seconds in and stopped. I think it may
be written off to there weren't that many stations and anything that
popped up with a CQ was clicked on :)
Neil, KN3ILZ
On 11/28/2018 10:53 PM, John Zante
Hello Chuck,
this is possibly a result of different MUF in those areas.
Here in middle Europe we can hear many stations from middle East / Asia
at around 4 to 5:30pm in FT8 with quite good signals. But they do not
hear us - no way... At that time, we have daylight in Europe, they are
already in t
Looking forward to. Forgive my spelling.
De OH6VDA
> 29. nov. 2018 kl. 14:07 skrev Tom Ramberg :
>
> In a couple of days, when RC1, 2 and 3 stop working, and only RC4 and RC5
> works, hopefully this situation where a lot decode 77 bit messages but do not
> respond will stop. Lokking forward to
In a couple of days, when RC1, 2 and 3 stop working, and only RC4 and RC5
works, hopefully this situation where a lot decode 77 bit messages but do not
respond will stop. Lokking forward to a comlete 77 bit universe.
Tom, OH6VDA
Sendt fra min iPad Air 2
> 29. nov. 2018 kl. 03:30 skrev Chuck Fu
On a (sort of) related topic: I looked but I couldn't find how to clear the
contest log. I don't see a specific contest-only log and other than deleting
the old entries one at a time I couldn't figure out how to do it otherwise.
I swear I read the Quick Start guide and release notes. I think it may
On 29/11/2018 01:59, K2DBK-WSJT wrote:
On a (sort of) related topic: I looked but I couldn't find how to clear the
contest log. I don't see a specific contest-only log and other than deleting
the old entries one at a time I couldn't figure out how to do it otherwise.
I swear I read the Quick Star
On 29/11/2018 04:47, Paul Kube wrote:
Is there any way to control colors of a non-CQ message? There doesn't
seem to be, and I would like to do that.
For example:, I'd like to have a visual cue when someone not in the
log is finishing a QSO, so I know they're not a dupe and I can tailend
witho
Hi all,
I was on 40 meters for the FT8 Roundup practice session last evening (NA
time).
Operating time: 0200 to 0259 UTC
Program: WSJT-X 2.0 RC5
Dial frequency 7.080
Power: 100 Watts
Antenna: Dipole at 50 ft
I operated as a Run station, calling CQ at audio Tx frequency 1000 Hz.
There are 240
Reference Page 5, "LoTW Download Errors:"
Note that Win32 OpenSSL is now at revision "q"
This version works OK with my Win7 Pro 64
73-Larry.
K4OZS
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo
Joe,
Any chance of coordinating a better time/band for testing?
The times selected (0200 GMT) are the worst possible times for long-haul,
cross-equatorial propagation from your parts on 40m under current solar
conditions. 0500 on 20m may provide better results for both you and us south of
th
On 11/29/2018 11:03 AM, Stephen Ireland VK3VM/VK3SIR wrote:
Any chance of coordinating a better time/band for testing?
The times selected (0200 GMT) are the worst possible times for
long-haul, cross-equatorial propagation from your parts on 40m under
current solar conditions. 0500 on 20m may p
Now that the cat is out of the bag and FT8 has begun to use dial
frequencies other than xx.074, when will it be permissible to move up 2KHz
when 20 or 40 meters is very busy and overcrowded?
Roy, W7IDM
___
wsjt-devel mailing list
wsjt-devel@lists.sourcef
Hi Wolfgang.
I'm aiming my messages at the users of previous RCs who can copy my 77 bit
messages but are routinely transmitting 75 bit messages ... because that's
where ~95% of the action is right now.
All I see from them is undecodable blobs on the waterfall but hopefully they
can at leas
I think it would be great if you would come up with a "good" hour for a
practice session in your part of the world and announce it. It just practice
and we all could benefit from that.
Don AA5AU
On Thursday, November 29, 2018, 10:24:52 AM CST, Joe Taylor
wrote:
On 11/29/2018 11:03 AM,
Gary,
One possibility to check what they might have answered is running two instances
of WSJT-X in parallel, one v2.0.0 and one v1.9.1. I am doing that and saw that
a number of others seems to do it as well. Can be helpful, as there are
currently lots of 75 bit messages above 2 KHz as well as 7
Yes, I did. After a dozen or so contacts (many from the same call area) it
became hard to remember who I'd worked and therefore difficult to see an
in-progress QSO about to end and know whether I should call the station or
not rather than waiting for him to call CQ again.
Color coding in a future
Bill, thanks for your reply. I understand UI design is a hard problem and
I'm glad you're on it. It sure seems that WSJT-X has a solid technical core
to build around, which is a good thing.
*As always, finding the balance of developing a tool that makes digital *
*communication by amateur radio fu
A new group has been formed where we can discuss RTTY and/or FT8 or any other
form of digital DXing or contesting. This should help lighten the load on the
RTTY, WSJT, and WSJT Software Development groups.
73, Don AA5AU
- Forwarded Message - From: Jay WS7I To: RTTY
Sent: Thursday, N
Helpful to whom, Uwe? When I'm hoping for 77 bit QSOs, I don't see much
purpose in coding and sending or receiving and decoding 75 bit messages.
Besides which, it would be tricky for me to run both WSJTX and JTDX at the same
time since they both want to grab the sound card and radio, and ex
On 29/11/2018 19:47, Gary Hinson wrote:
Besides which, it would be tricky for me to run both WSJTX and JTDX at the same
time since they both want to grab the sound card and radio, and exchange UDP
messages with Logger32.
Hi Gary,
there is no "grabbing" of the sound card so long as you are us
Contesters tend to make the QSO and log the dupe since it takes less time than
to inform someone they are a dupe and they may have broken your call when they
logged the previous QSO which is probably why they do not know they are a dupe.
In FT8 though, what are the chances of a broken call bein
Maybe it would help if there was a setting to keep the contest window
sorted by callsign. This might not help as much once that list gets very
large, but I think it would help the casual contester. (This is a
suggestion for a future release, not 2.0)
Mark KC1GWX
On Thu, Nov 29, 2018 at 1:20 PM Jo
Using the 'Default' configuration in v2.0.0-rc5, I've just been invoking and
trying all the various
modes that I'm likely to use, and JT65 seems to have disappeared.
In the process of trying each mode in turn I've found that even though I select
JT65 from the
'Modes' menu I get JT9 - the 'go
Hi Martin,
On 11/29/2018 3:44 PM, Martin Davies G0HDB wrote:
Using the 'Default' configuration in v2.0.0-rc5, I've just been invoking and
trying all the various
modes that I'm likely to use, and JT65 seems to have disappeared.
In the process of trying each mode in turn I've found that even
Running some simple internal tests today (RTTY RU) and note that Contest
exchanges are not being recorded in the wsjtx_log.adi file.
Similarly, contest exchanges are not conveyed in the UDP interface
logged QSO packet (to be expected as the UDP interface has not been
updated with any of the ne
Aside from contesting, sorting the block of ‘band activity’ pane decodes within
each cycle would be useful for regular DXing too, sorting them by sender’s
callsign, frequency, strength, distance or whatever. A full time auto-sort
would be nice if there are enough CPU cycles free but for the odd
OK, thanks Bill.
Maybe I'll try it out over the weekend ... and make some notes for others
with a similar setup ...
73
Gary ZL2iFB
-Original Message-
From: Bill Somerville
Sent: 30 November 2018 08:52
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] "NO RCV 75 BIT"
On
Quick Start for 2.0 says:
[image: image.png]
Item #1: the direct download link does not function.
After downloading the exe, I attempted to install, and notice that it is
not defaulting to "the Windows system directory":
[image: image.png]
Where should it be installed? Windows\System32?
Thanks
On 29 Nov 2018 at 16:06, Joe Taylor wrote:
> Hi Martin,
>
> Thanks for your report. This bug was identified and fixed several days
> ago. It will not be present in the GA release.
>
> The workaround in the RC5 release is simple. Switch to JT9+JT65 mode,
> toggle the button above "Hold Tx Fr
John and all who are discussing the contest dupe issue. Here is my solution
which I think is great.
I run my logging program on the screen all the time. When a contact is logged
in WSJT-X, it automatically gets sent to my log and shows up on the screen.
(Then it is easy for me to make any a
On 29/11/2018 21:36, Steve Sacco wrote:
After downloading the exe, I attempted to install, and notice that it
is not defaulting to "the Windows system directory":
Hi Steve,
that install location is fine. Later on in the installer you will be
prompted if you want to install the libraries into
I agree. It's an educational process. It does serve a purpose: It allows those
who decode, but cannot send 77 bit messages see why I'm not answering them.
73,
Andrew NO6E
"RC5 77 BIT"
Rogue River / Bandon, OR
On Nov 29, 2018, 09:51, at 09:51, Gary Hinson wrote:
>Hi Wolfgang.
>
>I'm aiming my
On 28/11/2018 18:58, bobraym...@dxtreme.com wrote:
For those of us wanting to import ADIF files from other sources into
WSJT-X, this feature, documented in the most-recent released user
guide, is not working in RC5:
“… turning *Show DXCC entity and worked before status* off and then on
again
Steve,
you didn't give what Windows version you're using.
I loaded it on Win8.1 with the defaults, and had no issues. Evidently
the installer adds a system path variable or the like, as I didn't
change the default install location and it works fine.
Neil, KN3ILZ
On 11/29/2018 4:36 PM, Steve
Hi Bill,
Thanks for getting back to me.
When I (and presumably others) want to re-load the wsjtx_log.adi file, will
a quick F2 and Enter reload the file without having to also toggle the new
button on the "Settings->Colors" panel (as long as it was checked
previously)?
Is some kind of keyboard
On 29/11/2018 22:33, bobraym...@dxtreme.com wrote:
Thanks for getting back to me.
When I (and presumably others) want to re-load the wsjtx_log.adi file, will
a quick F2 and Enter reload the file without having to also toggle the new
button on the "Settings->Colors" panel (as long as it was check
Is it something that has been discussed? My recent experience on 20m seems to
support this overcrowded problem. There is a lot of CQers but it is really hard
to actually get the bandwidth to complete contacts.
Fred, VE2WFB
De : Roy Gould
Envoyé : 29 novembre 2018 11:26
À : wsjt-devel@lists.sou
We are free to use these different modes anywhere the band plans allow them.
The major issue is that there are still users of the other modes that “live” in
those areas about which you speak. For example, there are quite a few
experimenters still using JT65 using QRPP levels who may not be se
I have noticed a lot of activity on 30 & 60M. In fact 60M has a lot of
activity. However, these are evening bands.
17M is very active during the day and 15M has a fair amount of activity as
well.
73;
Bill W2PKY
On Thu, Nov 29, 2018 at 6:56 PM James Shaver wrote:
> We are free to use these diffe
> On Nov 29, 2018, at 14:45, Bill Somerville wrote:
>
> that install location is fine. Later on in the installer you will be prompted
> if you want to install the libraries into the Windows System directory as
> well which is defaulted to yes and to the correct location for your system.
I a
I installed my first version of 2.0 (rc5) about 3 hours before
the test so contest mode was new to me. I renamed my
"wsjtx_log.adi" file to force wsjt-x to create a new one. I also
cleared the non-existent Cabrillo file as per the readme.
I had to go into Preferences->Colors and enable color c
Unfortunately no, it's an export software encryption issue
On Thu, Nov 29, 2018, 8:48 PM Gary McDuffie
>
> > On Nov 29, 2018, at 14:45, Bill Somerville
> wrote:
> >
> > that install location is fine. Later on in the installer you will be
> prompted if you want to install the libraries into
My view is still 'no', don't break rhythm by going into a side discussion about
dupes.If such messages are created, I will avoid using them, if possble.73,Ed
W0YK
Original message From: n...@comcast.net Date: 11/29/18 11:57
(GMT-08:00) To: j...@princeton.edu, wsjt-devel@lists.
I am very thankful and appreciative to the administrators of Winter Field Day
for allowing FT8 asa Digital mode in the January 2019 running of the event.
Even before the publicity of the DecemberQST article, this event has been
growing by leaps and bounds every year. https://www.winterfieldda
This has been discussed on the list already.
See the message at :
https://sourceforge.net/p/wsjt/mailman/message/36472448/
Neil, KN3ILZ
On 11/29/2018 11:38 PM, Tim Goeppinger wrote:
I am very thankful and appreciative to the administrators of Winter
Field Day for allowing FT8 as
a Digital mo
According to the FT8 Roundup
ruleshttps://www.rttycontesting.com/ft8-roundup/rules/
4. Exchange:
4.1. United States: Signal report and State.
4.2. Canada: Signal report and Province.
4.3. DX: Signal report and consecutive serial number, starting with 001.
de Mike W9MDB
On Thursday,
According to the FT8 Roundup
ruleshttps://www.rttycontesting.com/ft8-roundup/rules/
4. Exchange:
4.1. United States: Signal report and State.
4.2. Canada: Signal report and Province.
4.3. DX: Signal report and consecutive serial number, starting with 001.
de Mike W9MDB
On Thursday,
49 matches
Mail list logo