I downloaded and installed the 64 bit version of WSJT-X on my 64 bit
Windows-7 computer.
Changing to the Win64OpenSSL_Light-1.1_0k.exe file has resolved the problem
of receiving an error message when doing a 'Fetch' of the
'lotw-user-activity,csv' file.
However, when I try to bring up Settings,
I installed and ran ver 2.1.0 32 bit. Like ver 2.1.0 64 bit, it runs the
frequency test on startup. Ver 2.0.1 shows no evidence in my controller log of
ever running this test.
My tentative conclusion is that a test which did not run in ver 2.0.1 now runs
in ver 2.1.0 and that test sometimes
Still, it's nice feature, just made 2 contacts on 20m FT4 with just 4
mouse clicks.
( Enable S+P, Log QSO, Enable S+P, Log QSO ) ...
'Kari
On 7/18/19 5:28 PM, Joe wrote:
Thanks Joe,
This explanation is what I was missing!
a OK,
so then forget this button, because I'm 99.% all set
"maybe your CAT serial baud rate is too low for this delay to encompass the
first poll. Can you increase your CAT serial baud rate?"
Bill,
COM port baud is 38,400. I doubt the baud is the cause of the problem.
Thanks for confirming this check was in earlier versions. That is significant
Well said and to the point.
Perhaps the most important thing to understand is that this is an
experimental and adjustment time for FT4 that will (and needs to) fade
away. It's use after the current fascination with it subsides, needs to be
reserved for contests only.
Its only advantage is speed.
Thanks Joe,
This explanation is what I was missing!
a OK,
so then forget this button, because I'm 99.% all set up for
contesting with the N1MM+ telling WSJT-X all that, who is dupes, who is
good, who is a new mult etc. so this S button is more or less don't
worry about it.
Joe
On 18/07/2019 15:01, Christoph Berg wrote:
Re: Bill Somerville
2019-07-18<6f30c9d0-3471-8e36-0100-93bc2117a...@classdesign.com>
this is due to a rather awkward implementation. There is currently a project
underway to refactor the WSJT-X source code base, the first target is to
improve the
Re: Bill Somerville 2019-07-18
<6f30c9d0-3471-8e36-0100-93bc2117a...@classdesign.com>
> this is due to a rather awkward implementation. There is currently a project
> underway to refactor the WSJT-X source code base, the first target is to
> improve the implementation details that cause this
Joe --
On 7/18/2019 9:10 AM, Joe WB9SBD wrote:
I will double check the colors, BUT
Thinking Why should those make any difference at all anyway?
It is not just listening to all who is CQing, and then grab who is the
strongest?
Why should any of those choices below make any
I find the words "pretty inconsiderate or pretty ignorant" to be insulting and
inflammatory, regardless of context. And, they add no value to the discussion.
For example, one could say that "users are pretty inconsiderate or pretty
ignorant of the intended purpose of FT4" and the dialogue
On 18/07/2019 14:29, Kari wrote:
Hi developers,
it seems that whenever "Decode" is set to "Normal" or "Deep", then "A Priori"
decode
is enabled as well.
IIRC there used to be a separate option for AP.
Now, when WSJT-X detects a signal with AP, the display has
some extra spaces before the AP
Hi Bill,
just take the default installer options (except note you are not obliged
to contribute financially to the OpenSSL for Windows project). The
option to install into the system directory is the key one. The OpenSSL
v1.1.0 library names are different from the v1.0.2 ones so there is no
Hi developers,
it seems that whenever "Decode" is set to "Normal" or "Deep", then "A Priori"
decode
is enabled as well.
IIRC there used to be a separate option for AP.
Now, when WSJT-X detects a signal with AP, the display has
some extra spaces before the AP indicator and country name, like
Hi Gary,
thanks for that. I will look into this issue, thanks for the report.
73
Bill
G4WJS.
On 18/07/2019 14:22, Gary Rogers wrote:
Bill, no I do not.
Sent from my iPhone
On Jul 18, 2019, at 9:17 AM, Bill Somerville wrote:
On 18/07/2019 14:03, Gary Rogers wrote:
Morning all, i wonder
Which folder should this new file be installed into?
Thanks/73,
Bill AA4M
On 2019-07-18 00:38:22, Tom Ramberg via wsjt-devel wrote:
Could you please provide a link to the installation file of
WIN64_OpenSSL_1.1.0k_Light?
73 de OH6VDA Tom
Sendt fra min iPad Air 2
18. jul. 2019 kl. 01:39
Bill, no I do not.
Sent from my iPhone
> On Jul 18, 2019, at 9:17 AM, Bill Somerville wrote:
>
>> On 18/07/2019 14:03, Gary Rogers wrote:
>> Morning all, i wonder if anyone has reported this issue for 2.1.0:
>>
>> In FT 4 mode, when i change bands, both the band activity and RX frequency
>>
On 18/07/2019 14:10, Joe wrote:
I will double check the colors, BUT
Thinking Why should those make any difference at all anyway?
It is not just listening to all who is CQing, and then grab who is the
strongest?
Why should any of those choices below make any difference?
Joe,
On 18/07/2019 14:03, Gary Rogers wrote:
Morning all, i wonder if anyone has reported this issue for 2.1.0:
In FT 4 mode, when i change bands, both the band activity and RX frequency
window displays are erased…No error message just blank windows until the next
decode...This does not occur when
On 18/07/2019 13:43, Andy Durbin wrote:
My controller log search found no instances of this test before the
time I started using ver 2.1.0. Can you please confirm that this
test was not executed in ver 2.0.1.
73,
Andy, k3wyc
Andy,
the test has been in for many versions including v2.0.1.
I will double check the colors, BUT
Thinking Why should those make any difference at all anyway?
It is not just listening to all who is CQing, and then grab who is the
strongest?
Why should any of those choices below make any difference?
Joe WB9SBD
Sig
The Original Rolling Ball
Is this from the 64-bit version? Can you test the 32-bit version?
de Mike W9MDB
On Thursday, July 18, 2019, 08:03:24 AM CDT, Andy Durbin
wrote:
"You should also note that the frequency is immediately reset back to
where it was before the resolution test started.:
Bill,
I provided
User cause the error, tampering files and making simple error in the file
name.
All is good and fine with WSJT-X 2.1.0, no troubles seen or experienced,
except this one, what I managed to create myself.
Very best regards,
:Jari / oh2fqv
___
wsjt-devel
Morning all, i wonder if anyone has reported this issue for 2.1.0:
In FT 4 mode, when i change bands, both the band activity and RX frequency
window displays are erased…No error message just blank windows until the next
decode...This does not occur when changing bands when using FT 8 or JT65
"You should also note that the frequency is immediately reset back to
where it was before the resolution test started.:
Bill,
I provided an example that showed the frequency was not reset to the pre-test
value. Here is another which shows the freq offset was applied to the receive
and
On 18/07/2019 13:29, Jari A wrote:
Lost my wsjtx_log.adi file!
I did some file managing last night, and all was fine. Today I start
on 20m FT8 and all was ok.
Then I change to 6m FT8 and for my surprise all stations were color
marked.
On start wstjx shows : Scanned ADIF log, 0 worked before
Lost my wsjtx_log.adi file!
I did some file managing last night, and all was fine. Today I start on 20m
FT8 and all was ok.
Then I change to 6m FT8 and for my surprise all stations were color marked.
On start wstjx shows : Scanned ADIF log, 0 worked before records created
I'm not sure if I
On 18/07/2019 13:12, Claude Frantz wrote:
Using 2.1.0
Hi all,
I'm doing…
File -> Settings -> Frequencies. Then pointing the mouse to the header
line of the Working Frequencies table. A little pop-up window appears,
saying: Right click to maintain the working frequencies list. Now, I
click
Using 2.1.0
Hi all,
I'm doing…
File -> Settings -> Frequencies. Then pointing the mouse to the header
line of the Working Frequencies table. A little pop-up window appears,
saying: Right click to maintain the working frequencies list. Now, I
click the right mouse key: Nothings is doing.
It's on the Same page:
https://slproweb.com/products/Win32OpenSSL.html
Link: https://slproweb.com/download/Win64OpenSSL_Light-1_1_0k.exe
73's
Greg, KI7MT
On 7/18/19 1:52 AM, Tom Ramberg via wsjt-devel wrote:
That's the WIN32 version.
73 de Tom OH6VDA
Sendt fra min iPad Air 2
18. jul. 2019
That's the WIN32 version.
73 de Tom OH6VDA
Sendt fra min iPad Air 2
> 18. jul. 2019 kl. 10:15 skrev Maurizio Brameri
> :
>
> I have found this link: https://slproweb.com/products/Win32OpenSSL.html
>
> Bye,
>
> Maurizio
>
>
>
> Il 18/07/2019 08:38, Tom Ramberg via wsjt-devel ha scritto:
>>
I have found this link:
https://slproweb.com/products/Win32OpenSSL.html
Bye,
Maurizio
Il 18/07/2019 08:38, Tom Ramberg via
wsjt-devel ha scritto:
Could you please provide a link to the installation file of
Could you please provide a link to the installation file of
WIN64_OpenSSL_1.1.0k_Light?
73 de OH6VDA Tom
Sendt fra min iPad Air 2
> 18. jul. 2019 kl. 01:39 skrev Bill Somerville :
>
> Hi,
>
> you may get an SSL/TLS network error when fetching a fresh LoTW users
> database
32 matches
Mail list logo
