Thanks Bill,
that certainly has done the magic, to think I have struggled with this for
many years and not thought to ask..
Regards,
Peter, vk5pj
On Sun, Nov 22, 2020 at 8:38 AM Bill Somerville
wrote:
> Hi Peter,
>
> switching configurations is equivalent to initial startup, it depends on
> th
Hi Bill san
I noticed it at the same time the email arrived.
I will check a little more.
73 and Thanks.
--
de JH8XVH Yoshi
On Sun, 22 Nov 2020 00:40:22 +
Bill Somerville Write:
> Hi Yoshi san,
>
> that is because you have no CAT controlled rig. The alternative is to start
> at the cur
Hi Yoshi san,
that is because you have no CAT controlled rig. The alternative is to
start at the current VFO frequency of the rig which is not possible
without CAT control.
73
Bill
G4WJS.
On 22/11/2020 00:34, Yoshi,I wrote:
Hi Bill
"Settings->General->Monitor returns to last used frequenc
Hi Bill
>"Settings->General->Monitor returns to last used frequency".
My system was gray out. I can't check mark.
Settings-> General-> Monitor returns to last used frequency on other PCs can be
checked normally.
Only laptops can't be checked.
It may be a laptop setting, so I'll investigate it a l
Hi Peter,
switching configurations is equivalent to initial startup, it depends on
the option "Settings->General->Monitor returns to last used frequency".
73
Bill
G4WJS.
On 21/11/2020 20:16, Peter Sumner wrote:
Hello Bill,
does your explanation of behavior hold for when the mode is changed
Hello Bill,
does your explanation of behavior hold for when the mode is changed via
the selection of a different configuration? In my experience the correct
frequency is never selected when I change to a different configuration, I
have multiple configurations with matching modes for both my HF a
Hi Bill san.
Of course, Settings-> General-> IARU Ragion = Region3 is set.
When started with WSJT-X 2.2.2 with this setting, it follows and operates
without any problem.
(I forgot to write in this email, but it is a report with WSJT-X 2.3.0rc2.
Sorry)
WSJT-X 2.2.2 and WSJT-X 2.3.0 rc2 have diff
On 21/11/2020 06:33, Saku wrote:
Hi!
I'm using IC7300 with rig setting "Data/pkt".
Randomly I see wsjtx selecting right mode "USB-D" but the filter is
set as "Fil3", the narrowest one, while it should be "Fil1" the widest.
There is no setting for bandwidth. When studied what wsjtx actually
On 21/11/2020 01:51, Yoshi,I wrote:
Hello
issue? report No change frequncy by FT8 to MSK144
When changing from FT8 to MSK144 at 50MHz, the frequency does not follow.
We have confirmed that 50.260MHz has been added to the frequency list MSK144.
When changing from FT8 toMSK144, the frequency list
