Thanks Bill, that certainly has done the magic, to think I have struggled with this for many years and not thought to ask..
Regards, Peter, vk5pj On Sun, Nov 22, 2020 at 8:38 AM Bill Somerville <g4...@classdesign.com> wrote: > Hi Peter, > > switching configurations is equivalent to initial startup, it depends on > the option "Settings->General->Monitor returns to last used frequency". > > 73 > Bill > G4WJS. > > On 21/11/2020 20:16, Peter Sumner wrote: > > Hello Bill, > does your explanation of behavior hold for when the mode is changed via > the selection of a different configuration? In my experience the correct > frequency is never selected when I change to a different configuration, I > have multiple configurations with matching modes for both my HF and VHF > rigs, selecting a different configuration always leaves the rig at the > previously used frequency, is this expected behavior? > > WSJT-X v2.30-RC2 and WSJT-X v2.21 > > Regards, > Peter vk5pj > > >> WSJT-X will select the lowest frequency on the current band (or new band >> if selecting a band) for the current mode (or new mode if changing >> mode). The lowest frequency is the lowest one that is specified in >> "Settings->Frequencies->Working Frequencies" that has a matching band, >> mode if specified, and IARU Region that matches the one set in >> "Settings->General". Have you set your IARU Region in "Settings >> General"? If not then IARU Region filtering of frequencies will not be >> done. >> >> 73 >> Bill >> G4WJS. > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel