Hi Peter,
switching configurations is equivalent to initial startup, it depends on
the option "Settings->General->Monitor returns to last used frequency".
73
Bill
G4WJS.
On 21/11/2020 20:16, Peter Sumner wrote:
Hello Bill,
does your explanation of behavior hold for when the mode is changed
via the selection of a different configuration? In my experience the
correct frequency is never selected when I change to a different
configuration, I have multiple configurations with matching modes for
both my HF and VHF rigs, selecting a different configuration always
leaves the rig at the previously used frequency, is this expected
behavior?
WSJT-X v2.30-RC2 and WSJT-X v2.21
Regards,
Peter vk5pj
WSJT-X will select the lowest frequency on the current band (or
new band
if selecting a band) for the current mode (or new mode if changing
mode). The lowest frequency is the lowest one that is specified in
"Settings->Frequencies->Working Frequencies" that has a matching
band,
mode if specified, and IARU Region that matches the one set in
"Settings->General". Have you set your IARU Region in "Settings
General"? If not then IARU Region filtering of frequencies will
not be done.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
