l.com]
Sent: 16 March 2018 20:54
To: WSJT software development
Subject: Re: [wsjt-devel] Feature request: WSJT-X
Hello Bill,
for a lot of my EME contacts on 50 MHz I had been using WSJT10, which
cannot do PTT via CAT so have changed over to use WSJT-X for these contacts
now as I have recently
Hello Bill,
for a lot of my EME contacts on 50 MHz I had been using WSJT10, which
cannot do PTT via CAT so have changed over to use WSJT-X for these contacts
now as I have recently moved the IC-7600 to use only the onboard USB
interface in the radio to reduce the complexity of the shack PC as it
On 16/03/2018 20:29, Peter Sumner wrote:
eg. on WSPR, 144.489 if I type into the box as you suggested (not
tried that before I must admit), my test frequency was 144.085 which
moved the rig all okay, then if I open the settings menu and close I
am now set back to be on 144.489. This is the beha
Hello Joe,
I have just tried your suggested method, if I then go to the
configuration menu and press okay, when it returns to the main interface,
the rig reverts to the SET frequency for the WSJT mode selected.
eg. on WSPR, 144.489 if I type into the box as you suggested (not tried
that before
Hi Peter,
On 3/16/2018 1:28 AM, Peter Sumner VK5PJ wrote:
I would like to see if it would be possible to include a toggle on the
main GUI that stops WSJT-X sending frequency set commands to the
transceiver.
I do manual QSYs all the time when using WSJ-X on VHF bands. It's as
simple as ty
Aah. Ok. One day ill get to EME.
Thanks and Regards
John Ward
73 de John
ZS1EQ
On 16 Mar 2018 08:42, wrote:
> Hi John
>
> The problem OZ1LPR ran into was during some EME tests of the new Doppler
> modes in 1.9.0. He was attempting to operate manual split with Doppler
> tracking set to off, i
Hi John
The problem OZ1LPR ran into was during some EME tests of the new Doppler
modes in 1.9.0. He was attempting to operate manual split with Doppler
tracking set to off, in an attempt to disable CAT frequency commands to
his radio completely. He found that having set up his VFO A and VFO B t
Morning. Cant you simply avoid the birdie by adjusting the tx/rx frequency
settings with the mouse on the waterfall display and then use the "fake"
options in the settings?
Thanks and Regards
John Ward
73 de John
ZS1EQ
On 16 Mar 2018 8:17 AM, wrote:
> Hi Peter
>
> One option might be to arrang
Hi Peter
One option might be to arrange PTT via a serial port to the mic PTT line
and not have to use CAT, in which case the Rig to 'None' would work.
I have heard of one other request for what you are asking, from OZ1LPR,
for much the same reasons.
73
Charlie G3WDG
>>
>> Hello,
>>
>
> firstly
>
> Hello,
>
firstly my thanks to those who are at the coal face developing WSJT and its
brothers.
I would like to see if it would be possible to include a toggle on the main
GUI that stops WSJT-X sending frequency set commands to the transceiver.
When I control my IC-7600 and my IC-910 with WSJT
10 matches
Mail list logo
