Have not seen my problem listed yet, so I will try to explain what I see.
Every once in a while operating, the TX function stops working. The Transmitter
goes into transmit but there is no audio drive so no RF is produced. WSJT-X
thinks it is working. If I shut down WSJT-X and try to restart the
I also have seen the problem and have come to believe that it related
the CAT..
If I use a traditional CAT ( comport) with Kenwood TS480, I do not have
this problem. If is use the Flex interface for CAT this problem returns..
You should also note that the CPU usage for the WSJT task is about 10
FWIW, Using a Flex 6600 and MacOS Mojave, xDAX and xCAT - no problems like
those reported below. CPU usage is in line with previous versions, CAT and DAX
operation, even via SmartLink, work smoothly.
Geo/KF2T
> On Dec 13, 2018, at 10:27 AM, Al wrote:
>
> I also have seen the problem and have
Thanks for the responces to the problem. Sorry for you guys but glad I am not
alone.The CAT seems to be working just fine 6700 goes into Transmit (RED light)
and wsjt-x indicatesa message is being sent but DAX shows no audio. 15 seconds
later RED light goes out. Itdoes seem to be related to the
Subject: Re: [wsjt-devel] TX function lost, then have Task Manager problem
I also have seen the problem and have come to believe that it related the CAT..
If I use a traditional CAT ( comport) with Kenwood TS480, I do not have this
problem. If is use the Flex interface for CAT this problem
are development <mailto:wsjt-devel@lists.sourceforge.net>>
> Subject: Re: [wsjt-devel] TX function lost, then have Task Manager
> problem
>
> I run a FLEX 6600 and I see it too. This problem has been around for a
> while; it is not due to the WSJT protocol change. Since
: [wsjt-devel] TX function lost, then have Task Manager
problem
I run a FLEX 6600 and I see it too. This problem has been around for a while;
it is not due to the WSJT protocol change. Since the transmitter engages we
know that the transmit command is getting through the CAT system to the radio
; Al Pawlowski, K6AVP
> Los Osos, CA USA
>
> Date: Fri, 14 Dec 2018 18:28:58 +0000
>
> From: David Fisher
> To: WSJT software development
> Subject: Re: [wsjt-devel] TX function lost, then have Task Manager
> problem
>
> I run a FLEX 6600 and I see it too. This probl
ri, 14 Dec 2018 18:28:58 +
From: David Fisher
To: WSJT software development
Subject: Re: [wsjt-devel] TX function lost, then have Task Manager
problem
I run a FLEX 6600 and I see it too. This problem has been around for a while;
it is not due to the WSJT protocol change. Since the t
ses to completely shutdown. Seems
> like a Windows thing. I am using Windows 10 Home now on a 2.4GHz I5, but it
> was the same on Windows 7pro and Windows 10pro on a 3.2GHz I3.
>
> Al Pawlowski, K6AVP
> Los Osos, CA USA
>
>> Date: Fri, 14 Dec 2018 18:28:58 +
>
>&
10 matches
Mail list logo