Re: [wsjt-devel] TX..RX with different radios

Lets me get my words straight - The various awards that use the very specific online logging systems assume for awards purposes you are following the rules. You as an individual can certainly break any rule you like and use any log platform you like but if you choose to use one of the logging pl

Re: [wsjt-devel] TX..RX with different radios

On 8/24/2022 12:57 PM, Dwayne Sinclair via wsjt-devel wrote: Sure… All the LOTW awards come with rules. LOTW does not issue awards. It is ONLY a worldwide log book that the issuers of awards can consult to document QSOs. Some issuers of awards are ARRL, CQ Magazine, the County Hunters, the RS

[wsjt-devel] TX..RX with different radios

Sure… All the LOTW awards come with rules. Here are the rules for DXCC: http://www.arrl.org/dxcc-rules You can have a split transmitter and receiver but it needs to be within 500M of each other... a) All stations used to make contacts for a specific DXCC award

Re: [wsjt-devel] TX..RX with different radios

>The problem with all this is that completing a QSO does not count for >anything. You cannot log to LOTW, QRZ, eQSL since split TX/RX is not >permitted. It makes sense for SSB/Net Control/adhoc QSO’s with friends but not >for WSJT-X since many of us using WSJT-X are using it for awards. Hi Dway

Re: [wsjt-devel] TX..RX with different radios

I have done this a few times just to prove to myself that TX is not an issue - Better receive is where I would get the best improvement in WSJT-X. Both Mac and Windows have native and third party capability to split Audio so TX can go one direct and RX the other. WSJT-X TX and CAT Control can be

Re: [wsjt-devel] TX..RX with different radios

Hi Mike, Does this control the frequency of an SDR receiver as well as the analog transmitter? Since Hamlib is part of WSJT-X, do you just run WSJT-X as usual?  VY 73, Lance On 8/24/2022 13:17:03, Black Michael via wsjt-devel wrote: That doesn't solve the problem either. He needs to control

Re: [wsjt-devel] TX..RX with different radios

That doesn't solve the problem either. He needs to control the frequency on two rigs at once -- and WSJTX does not support that. I've got this in Hamlib as an enhancement.https://github.com/Hamlib/Hamlib/issues/655 Mike W9MDB___ wsjt-devel mailing list

Re: [wsjt-devel] TX..RX with different radios

Hi, Omnirig software should be able to do this for you. Alan G0TLK, sent from my mobile device On 24 August 2022 00:30:03 Pino Zollo via wsjt-devel wrote: This does not control one of the two radios...for instance the frequency change. I use the virtual audio channel to control the RTL-SDR

Re: [wsjt-devel] TX..RX with different radios

This does not control one of the two radios...for instance the frequency change. I use the virtual audio channel to control the RTL-SDR...with Gqrx and it works fine. As well I control the IC-706 via serial interface... ...but I need to control both at the same time. So I suppose that it ca

Re: [wsjt-devel] TX..RX with different radios

I think all you need to do is configure the WSJT audio to use the audio channel that goes to you transmitter for transit, and connect the WSJT audio receive channel to the SDR audio. You may have to use a virtual audio channel. It’s difficult to suggest a detailed set up without knowing the sp

Re: [wsjt-devel] TX..RX with different radios

Hi Pino! N2EME makes a little box that does this: https://cdn-bio.qrz.com/e/n2eme/sdr_1.jpg?p=dcd5b56c2c296c565f9f3ca54003e69b There are a number of us who use separate SDR receivers. GL and VY 73, Lance On 8/21/2022 18:17:20, Pino Zollo via wsjt-devel wrote:  Please how could I configure wsjt

Re: [wsjt-devel] TX..RX with different radios

I do this with a MFJ-1708B-SDR SWITCH best, alex K6LOT > On Aug 21, 2022, at 11:22 AM, Pino Zollo via wsjt-devel > wrote: > >  Please how could I configure wsjtx to receive via an SDR dongle and > transmit via a regular radio(IC-706 in > > my case) ? > > If not possible, please, con

[wsjt-devel] TX..RX with different radios

 Please how could I configure wsjtx to receive via an SDR dongle and transmit via a regular radio(IC-706 in my case) ? If not possible, please, consider it as a future improvement. This is very useful on the low bands... e.g. on 630m the IC-706 transmits something...but its RX is undefi