Could we make, the watchdog timer adjustable, for different lines?
Like have TX-6 be X number (user adjustable 1 to 100) of Transmissions
before having to Re Enable TX has to be clicked on.
And then all the others, Like Tx-1 thru TX-5 say also adjustable 1 to 10,
Sometimes TX-5 has to wait an
> On Sep 8, 2017, at 9:30 AM, Rich - K1HTV wrote:
>
> Instead, what happens when the "Disable Tx after 73" box is UNCHECKED is that
> a long series of Tx5 "73" messages is sent at the end of a QSO. They continue
> to be sent until they are manually stopped. I see no benefit of the box even
>
HI Rich,
comments in line below.
On 08/09/2017 16:30, Rich - K1HTV wrote:
Instead, what happens when the "Disable Tx after 73" box is UNCHECKED
is that a long series of Tx5 "73" messages is sent at the end of a
QSO. They continue to be sent until they are manually stopped. I see
no benefit
further transmissions after a Tx5 (73)
message is sent and eliminate the "Disable Tx after 73" check box completely?
73,
Rich - K1HTV
4,200+ FT8 Q's in 133 countries with <75W
= = =
Date: Thu, 7 Sep 2017 21:42:35 -0400
From: James Shaver
To: wsjt-devel@lists.sourceforge.net
Subjec
That's normal - user interaction to start another QSO is required to
prevent "QSO machines"
Jim S.
N2ADV
On 9/7/2017 7:49 PM, Rich - K1HTV wrote:
Using 1.8.0-rC2 r8069
Under Settings, General tab, under 'Behavior', the "Disable TX after
73" unchecked. However, when the Tx5 (73) message
Using 1.8.0-rC2 r8069
Under Settings, General tab, under 'Behavior', the "Disable TX after 73"
unchecked. However, when the Tx5 (73) message is sent, the log QSO box comes
up as it should, but the "Enable Tx" goes from red to gray. This disables
further transmissions until the "Enable Tx" bu