On Jul 8, 2021, at 4:51 AM, Bill Somerville wrote:you are the first to report that behaviour. What should happen, and does when I start WSJT-X, is a message about the number of worked before records discovered in your WSJT-X ADIF log is written to the status bar *in place* o
On 08/07/2021 14:17, Reino Talarmo wrote:
Hi Bill,
I also started to see that behavior. I update my Windows 7 into Windows 10 and
changed hard disk into SSD. Now with v2.4.0 the worked before information is
written as before, but very fast the mode info overwrites it and a bit later
the status
On 08/07/2021 14:17, Reino Talarmo wrote:
Hi Bill,
I also started to see that behavior. I update my Windows 7 into
Windows 10 and changed hard disk into SSD. Now with v2.4.0 the worked
before information is written as before, but very fast the mode info
overwrites it and a bit later the stat
Hi Bill,
I also started to see that behavior. I update my Windows 7 into Windows 10 and
changed hard disk into SSD. Now with v2.4.0 the worked before information is
written as before, but very fast the mode info overwrites it and a bit later
the status information. I could not get a screenshot
Hi, Windows 10 Update reported graphics driver up to date but I checked
on the manufacturer site and there was a minor update available, so
installed that and no difference.
That initial message is there - I can see it for something less than a
second, then the normal boxes overwrite it before
On 08/07/2021 11:43, al...@alangroups.plus.com wrote:
Hi, just after WSJT-X starts on my machine there's a bit of screen
writing jumble in the status bar that appears for a few seconds, as
screen grab attached. It clears itself but presumably ideally
shouldn't be there! W10 x64
It's also
Hi, just after WSJT-X starts on my machine there's a bit of screen
writing jumble in the status bar that appears for a few seconds, as
screen grab attached. It clears itself but presumably ideally shouldn't
be there! W10 x64
It's also present in 2.5.0-RC3
Alan G0TLK
__