Lee Bengston wrote:
Quick question on the maps. Is it just your gif and jpg maps that do not
display, i.e. other maps such as the online tiger maps display OK?
Lee - K5DAT
Murphy, TX
___
Xastir mailing list
Xastir@xastir.org
http://lists.xastir.org/c
Quick question on the maps. Is it just your gif and jpg maps that do not
display, i.e. other maps such as the online tiger maps display OK?
Lee - K5DAT
Murphy, TX
___
Xastir mailing list
Xastir@xastir.org
http://lists.xastir.org/cgi-bin/mailman/listin
On Friday 15 June 2007 5:20:21 pm Ray Wells wrote:
> However, with so many successfully compiled systems out there and
> working, I really would like to join them.
>
> I haven't been up long enough this morning to look into the video card
> driver suggestion of Chris Thompson, but thanks, Chris, fo
Curt, WE7U wrote:
On Fri, 15 Jun 2007, Ray Wells wrote:
I've had a long standing problem with no maps in xastir and I almost
drove Curt to insanity with my problem.
Define "almost"...
By any chance have you tried the LSB version of Xastir to see if it
runs ok too? I just created ano
On Fri, 15 Jun 2007, Ray Wells wrote:
> I've had a long standing problem with no maps in xastir and I almost
> drove Curt to insanity with my problem.
Define "almost"...
By any chance have you tried the LSB version of Xastir to see if it
runs ok too? I just created another one today, so the 1.9
On Friday 15 June 2007 4:36:21 am Ray Wells wrote:
> I've had a long standing problem with no maps in xastir and I almost
> drove Curt to insanity with my problem.
>
> The problem started with a Debian upgrade some time ago but I don't
> recall just which upgrade it was, not that that's important a
I've had a long standing problem with no maps in xastir and I almost
drove Curt to insanity with my problem.
The problem started with a Debian upgrade some time ago but I don't
recall just which upgrade it was, not that that's important at this
stage because I've moved on.
I'm building up a
At 06:48 PM 6/3/2007, Lee Bengston wrote:
Chris, by "from the repository" do you mean the binary 1.84 version from the
Feisty repository, or do you mean the CVS repository? I had a no-map
problem the first time I installed the Xastir 1.84 binary under Kubuntu 7.04.
Later I tried it again on a cl
On 6/3/07, Chris Thompson <[EMAIL PROTECTED]> wrote:
from the ubuntu repository i used sudo apt-get install xastir
--
-Chris
OK, that would be the binary version - the last I version I saw from the
ubuntu/feisty repository was 1.84. My current install is 1.91 from CVS, and
since the maps
On Sunday 03 June 2007 8:48:17 pm Lee Bengston wrote:
> On 6/3/07, Chris Thompson <[EMAIL PROTECTED]> wrote:
>
> as a side note you may want to consider. i had a problem with my maps after
>
> > installing xastir from the repository under Kubuntu 7.04
> >
> > when i installed the driver for 3d grap
On 6/3/07, Chris Thompson <[EMAIL PROTECTED]> wrote:
as a side note you may want to consider. i had a problem with my maps after
installing xastir from the repository under Kubuntu 7.04
when i installed the driver for 3d graphics for my nvidia card that issue
went
away...just food for thought
On Sunday 03 June 2007 7:33:13 pm Lee Bengston wrote:
> On 6/3/07, Lee Bengston <[EMAIL PROTECTED]> wrote:
> > Definitely - just got Kubuntu 7.04 up and running with a new install
>
> under
>
> > VMware server. I will then try a CVS based install and save everything.
>
> Hi All,
>
> As a follow
On 6/3/07, Lee Bengston <[EMAIL PROTECTED]> wrote:
Definitely - just got Kubuntu 7.04 up and running with a new install
under
VMware server. I will then try a CVS based install and save everything.
Hi All,
As a follow up to my earlier message today, I compiled Xastir 1.91 under
Kubuntu 7
On 6/2/07, Tom Russo <[EMAIL PROTECTED]> wrote:
That's odd. I just checked, and the geotiff URL that's in the get-maptools
script works just fine right now. Perhaps you had a problem in your
edited
get-maptools.sh?
Yes, it's possible I fat-fingered something there during the edit.
Keep 'em
James Jolin wrote:
Chris Thompson wrote:
just a few setup issues i just cant seem to wrap my mind around.
one is that i'm not able to view any maps, i had xastir working under
windows but since swaping to the Kubuntu Fiesty 7.04 machine am not
able to see maps.
the other is i have not seen
On Sun, 3 Jun 2007, Chris Thompson wrote:
> the other is i have not seen any traffic from the tnc, the recieve light
> comes
> on but no visible traffic on the screen. the com port selection is set
> to /dev/ttyS0 and set to enable on start up. is this not correct?
Are you using the proper sta
just a few setup issues i just cant seem to wrap my mind around.
one is that i'm not able to view any maps, i had xastir working under windows
but since swaping to the Kubuntu Fiesty 7.04 machine am not able to see maps.
the other is i have not seen any traffic from the tnc, the recieve light co
Tom Russo wrote:
>
> If you have problems, rather than backing of to an older source distribution,
> try posting the errors here and we can probably get you squared away. I've
> installed Xastir onto 3 Ubuntu 7.04 machines already; I wrote the
> wiki instructions while doing the first one, and
On Sat, Jun 02, 2007 at 07:48:38PM -0500, we recorded a bogon-computron
collision of the <[EMAIL PROTECTED]> flavor, containing:
> On 6/2/07, Tom Russo <[EMAIL PROTECTED]> wrote:
>
> >
> > What were the errors? You should be able to follow the "HowTo:Ubuntu 6.10
> >
> and 7.04" instructions
>
On 6/2/07, Tom Russo <[EMAIL PROTECTED]> wrote:
What were the errors? You should be able to follow the "HowTo:Ubuntu 6.10
and 7.04" instructions (
http://www.xastir.org/wiki/index.php/HowTo:Ubuntu_6.10)
on the xastir wiki to install Xastir CVS on your Kubuntu 7.04 virtual
machine.
It should
On Sat, Jun 02, 2007 at 03:06:55PM -0500, we recorded a bogon-computron
collision of the <[EMAIL PROTECTED]> flavor, containing:
>
> I also tried compiling Xastir 1.91 from CVS on a clean installation of
> Kubuntu 7.04, but unfortunately there were errors. Next time I think I'll
> try the 1.9
Fyi, I've been playing with multiple Ubuntu/Kubuntu instances using VMware
Player. Last night I installed Kubuntu 7.04 clean under VMware and this
time instead of adding the standard Xastir 1.84 binary I grabbed version
1.82 from the Edgy repository, and I got it installed fine with maps working
On Sun, 27 May 2007, Lee Bengston wrote:
> Thanks for quick reply! I checked ~.xastir/tmp/ and there were no files in
> there, so it appears nothing is being fetched. I tried reinstalling
> libcurl. I am not familiar with libcurl - what is the syntax for using the
> "curl" command to test it ou
Thanks for quick reply! I checked ~.xastir/tmp/ and there were no files in
there, so it appears nothing is being fetched. I tried reinstalling
libcurl. I am not familiar with libcurl - what is the syntax for using the
"curl" command to test it out?
Regards,
Lee - K5DAT
On 5/27/07, Curt Mills
On Sun, 27 May 2007, Lee Bengston wrote:
> I just installed the Xastir 1.84 (package from repository) on Ubuntu 7.04,
> and I cannot get the online maps to draw.
> geo Image Map (ImageMagick library, many formats allowed)
> geo URL (Internet maps via libcurl library)
That Xastir
Hello,
I just installed the Xastir 1.84 (package from repository) on Ubuntu 7.04,
and I cannot get the online maps to draw. A couple of weeks ago, I
installed the Xastir 1.71 package on Ubuntu 6.06, and the online maps worked
great. I don't see any error messages when I either launch Xastir or
On Fri, 30 Mar 2007, Ray Wells wrote:
> I had to go back to an older Debian release (Woody) to get a couple of
> packages that graphicsmagick required. They installed without dependancy
> or error messages so I'm guessing the system is happy with them. I
> currently have /usr/include/graphicsmagic
Curt, WE7U wrote:
On Tue, 27 Mar 2007, Ray Wells wrote:
After much drama I finally found a deb package for Graphicsmagick and it
appears to be working - gm display brings up the logo.
However, when I run configure for xastir (1.8.5) it complains it can't
find GraphicsMagick-configure, and
On Tue, 27 Mar 2007, Ray Wells wrote:
> After much drama I finally found a deb package for Graphicsmagick and it
> appears to be working - gm display brings up the logo.
>
> However, when I run configure for xastir (1.8.5) it complains it can't
> find GraphicsMagick-configure, and wants to compile
A while back I was enquiring about how to get my maps working using
Imagemagick.
After much drama I finally found a deb package for Graphicsmagick and it
appears to be working - gm display brings up the logo.
However, when I run configure for xastir (1.8.5) it complains it can't
find Graphic
30 matches
Mail list logo
