There's a defect for sles10 to start the tftp server, could you try
following patch?
--- AAsn.pm.old 2012-12-04 22:03:30.0 -0500
+++ AAsn.pm.new 2012-12-04 22:02:25.0 -0500
@@ -1469,6 +1469,9 @@
# get the version of TCP/IP protocol
my $protocols;
my $v4only="-4 ";
+ if (x
What tftp package should be loaded with xcat for SLES 10 SP4? When I install
xcat the below tftp package is installed but I get the following error when I
start xcat:
bash[root@xcatserver]# /etc/init.d/xcatd start
Starting xCATd
in.tftpd: no process killed
/usr/sbin/in.tftpd: invalid option -- 4
If you
1. set nodehm.conserver to be the service node (using the ip that faces
the management node)
2. run makeconservercf on the management node. This will create
/etc/conserver.cf file on both mn and sn)
3. service conserver stop
service conserver start
for both mn and sn
Then you can
It turns out the /xcatpost/updateflag.awk was sending the status back to the
xcatd and causing nodeset to run.
This could not resolve the ip address and created a new DHCP entry without the
fixed-address.
I had added new entries to the networks table. Restarted xcatd solved the
problem.
Mark F
Odd. FYI, fixed-address should only be missing if the name 'hv001'
resolves to an address that overlaps in the networks.dynamicrange.
I am unaware of any circumstance where it would change one moment to next
unless dynamicrange was modified in the middle of operation...
From: "Frenette, Mar
nodech bootparams.addkcmdline=
That should leave group definition intact and explicitly clear the
override. I would have guessed " " would have worked, but the above
definitely does.
From: "Pocina, Goran"
To: xCAT Users Mailing list ,
Date: 12/03/2012 03:15 PM
Subject:Re: [xc
I'm having a problem where a nodes dhcp lease entry is loosing the
"fixed-address" line during an install. It seems to be happening during the
postscript just before the reboot. I originally thought the dhclient was
releasing it's address so I ran a tcpdump and didn't see anything going back t
Hello list,
quick question following the rcons thread - we would like the service
nodes to run the conserver daemon, however, we would also like to open the
rcons / wcons from the management node.
right now i'm getting the following messages -
xcatmn:~ # rcons idp1
sn2: access from your host
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Granting_Users_xCAT_privileges
should be the doc that could help you out.
Thanks,
-
Li,Guang Cheng (李光成)
IBM China System Technology Laboratory
Email: ligua...@c
How can I build ssh for no root user,but xdsh can set up no password only for
root user .
any advice?
2012-12-04
m13601078155
--
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PC
10 matches
Mail list logo