Hi, friends!
I have some problem with X Server's start after building and
installing XFree86 4.3.0 from latest source via CVSUp on
FreeBSD 4.8-STABLE. Support of IPv6 is disabled on my system.
What should I do to resolve this problem?
Thanks!
--- cut the log file "/var/log/XFree86.0.log".
_XSE
Dear sir,
I'm an Indian, a Computer Science student, interested in RedHat
Linux since a year before. I've the hardware as:
motherboard-Intel845GLLY mode4l, VBideo memory=8 MB(max), has a
PS/2 mouse. I have a probleb, that is , I can't get into the
X-Serverit shows the message that proper dr
Anyone? Someone has to know how to do this.
- Original Message -
From: "Rob Taft" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, August 15, 2003 5:00 PM
Subject: [XFree86] Japanese fonts
> Hi, I'm trying to get Japanese fonts working without the X Font Server.
The
> seem to
When I use xinerama where one screen is smaller(in pixels), moving the mouse
horizontally will
cause it to warp vertically when moved off the screen. When the same is done
vertically, however,
the mouse stops and there is no warping. I'd like the vertically behavior to be the
default when
movi
On Mon, 18 Aug 2003, Rob Taft wrote:
> Anyone? Someone has to know how to do this.
1. Check the dir list in XF86Config is equal to
the /etc/X11/fs/config
2. Are you loading freetype and type1 modules in
XF86Config ?
HTH :)
--
Bharathi S, IndLinuX Team, (__)
DON Lab,TeNeT Group,
In data Sun, 17 Aug 2003 16:51:21 -0600
Brian Richardson <[EMAIL PROTECTED]> scriveva:
> This is most easily accomplished by creating a virtual
> desktop using both monitors, and keeping windows on the left screen
> until the right screen is working.
Now... some more questions.. (I'm a bit confu
Thank you so much, it turns out that /etc/X11/fs/config had the correct path
for my installed Japanese fonts. Now I have to figure out how to use a
Japanese Keyboard. Does X have anything like MIS in windows?
- Original Message -
From: "Bharathi S" <[EMAIL PROTECTED]>
To: <[EMAIL PROTE
I am getting the below error when I try to compile xfree86 4.3.99.10 on
a system with the 2.6.0-test3 kernel using gcc 3.3.1. Any idea how to
fix this?
gcc -m32 -c -march=athlon-mp -mmmx -mfpmath=sse -msse -m3dnow -O3
-march=athlon-mp -mmmx -mfpmath=sse -msse -m3dnow -O3
-fno-merge-constants
-I
Hi,
I have serious problems with my video card!!!
Where I can see the:
ChipID
MemBase
IoBase
??
/var/log/XFree86.0.log:
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20 i686 [ELF]
Build Date: 04 May 20
On Mon, 18 Aug 2003, Robin Cook wrote:
> I am getting the below error when I try to compile xfree86 4.3.99.10 on
> a system with the 2.6.0-test3 kernel using gcc 3.3.1. Any idea how to
> fix this?
> gcc -m32 -c -march=athlon-mp -mmmx -mfpmath=sse -msse -m3dnow -O3
> -march=athlon-mp -mmmx -mfpmat
sir,
iam nanda gopal.
my system configuration is
P-IV,1.8Ghz processor,motherboard is "VIA P4M266a
Mercury Chipset",dispaly card is "S3 graphics
prosavage DDR",monitor is Samtron Syncmaster 56v 15"
monitor,Memory is 128 DDR RAM.
yesterday i have installed Red Hat Linux 7.2 in my
system.i have allo
Hi ( i?m spanish native so excuse my english )
Well i have the same problem with Suse 8.2 and the reason is in the driver
for the video S3 prosavage DDR, I now two solutions:
1. Fast:
Download the driver from: http://www.probo.com/timr/savage40.html and
a) make a backup copy of the existing savag
Good day.
I've a trouble with compiling a some programm for Qt 3.x under Sun Solaris 2.5.1:
after compiling linker wrote that XInternAtom isn't resolved reference...
When I copied libX11.so from Solaris 8 - linked created binary, but I can't run it,
because this XInternAtom isn't present in anoth
Vadim Bondarev wrote:
> I've a trouble with compiling a some programm for Qt 3.x under Sun Solaris
2.5.1: after compiling linker wrote that XInternAtom isn't resolved reference...
> When I copied libX11.so from Solaris 8 - linked created binary, but I can't
run it, because this XInternAtom isn't
all PCI values below are taken from http://yourvote.com/pci database.
> /var/log/XFree86.0.log:
>
> XFree86 Version 4.3.0
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1002,cab2 card , rev 02 class 06,00,00
> hdr 00
ATI IGP 340M host bridge
> (II) PCI: 00:01:0:
Sir,
My system configuration is P-III 500Mhz,128MB RAM, 810DST Intel
motherboard. And after I installed Red hat linux 8.0 (psych), it
seems okay.Later on, I upgraded it to Red hat linux 9.0(shrike).To
a sudden, the XFRee86 gave problem...and x display did not come,
showed only text based linux
Sir,
My system configuration is P-III 500Mhz,128MB RAM, 810DST Intel
motherboard. And after I installed Red hat linux 8.0 (psych), it
seems okay.Later on, I upgraded it to Red hat linux 9.0(shrike).To
a sudden, the XFRee86 gave problem...and x display did not come,
showed only text based linux
Dear Sir,
you are quite possibly missing the file
/usr/X11R6/lib/modules/fonts/libbitmap.a
that matches your current version of XFree86.
i suppose you have to get the latest XF86 library
package from the red hat ftp servers or some mirror
and install or upgrade to them.
i cant track that down
> Solaris 2.5.1 is a very old release - it only had X11R5, while
> almost everything these days assumes X11R6 or newer. If you must
> run under Solaris 2.5.1, your best bet is compiling a complete
> set of X11 libraries and installing them in /usr/X11R6 - then using
> those only for apps that requ
[EMAIL PROTECTED] writes:
>
> That has been months ago. Now: one problem solved, others remaining :)
> I got the source, was then 4.2.99-4, but I was too lazy and too scared
> (being a non-coder) to change a thing for quite a long time.
> Now I'm proud to present the attached almost-no-brain
I am trying to get the drivers for my voodoo3 card
(PCI) to install on x86
(Solaris 9). Im having difficulty locating the
drivers. Any help is greatly appresciated.
ALSO HOW WOULD I INSTALL IT ON
SOLARIS
THANK YOU.
Vadim Bondarev wrote:
Solaris 2.5.1 is a very old release - it only had X11R5, while
almost everything these days assumes X11R6 or newer. If you must
run under Solaris 2.5.1, your best bet is compiling a complete
set of X11 libraries and installing them in /usr/X11R6 - then using
those only for ap
Robert wrote:
I am trying to get the drivers for my voodoo3 card (PCI) to install on x86
(Solaris 9). Im having difficulty locating the drivers. Any help is
greatly appresciated.
ALSO HOW WOULD I INSTALL IT ON SOLARIS
The easiest way to get drivers for Solaris is to use Sun's XFree86 porting
Valery V. Lunyov wrote (in a message from Monday 18)
> Hi, friends!
>
> I have some problem with X Server's start after building and
> installing XFree86 4.3.0 from latest source via CVSUp on
> FreeBSD 4.8-STABLE. Support of IPv6 is disabled on my system.
>
> What should I do to resolve th
It seems to be not finding the memory. The system
works fine at 24 bit color with WinDoze XP. Consumes ~11MB Ram. Any
help would be greatly appreciated.
Attached are the log file and the configuration file (generated
by the RedHat 9.0 configurator.).
Thanks!!!
Charlie
-
> Why would you be allowed to install Qt then?
>
> > I've downloaded Qt 1.x and see that it's use XInternAtom too.
> >
> > So, may be libX11.so incomplete?..
>
Khm... A...
So, I can use only certificated software...
Qt 3.0.5 - old release has been certificated for this...
Any other tools/librari
hello i bought freebsd desktop edition and the x
window didnt reconize my graphics card so now im wondering what would be a
powerful graphics card to install on this system that x does
reconize
I'm having some issues with a Japanese keyboard. I got it running in
Windows and I know how to use it now. In Linux, Xfree86 4.2.0, Mandrake
8.2, I have the following lines for the keyboard:
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Optio
dear BSD user,
its a bit mood to talk about what hardware you should use
when you dont talk about what hardware you are using.
often its just supported but for some bogus reason the
hardware does simply not start up. in some cases it is
just trough the fact that software which you can get in
pres
I had trouble to install my video
Could you help me?
I am sending the log file
Thank you.
Breno Coelho
XFree86.0.log
Description: Binary data
On Monday 18 August 2003 05:02 pm, Breno Coelho wrote:
> I had trouble to install my video
>
> Could you help me?
>
> I am sending the log file
>
> Thank you.
>
> Breno Coelho
Does your screens section of /etc/X11/XF86config-4 look something like this -
Section "Screen"
Identifier "screen1"
would you mind,
if am redirecting you to the Rage3D forums.
there you will find several threads and
step by step instructions to bring nForce to life.
of course they do a bit more concentrate on ATI,
but that location should solve your problem anyways.
-Alex.
-Original Message-
From: Mor
You should upgrade to XFree86 4.3. Your version (4.0.3) is a couple
years old and predates your graphics hardware.
Mark.
On Mon, 18 Aug 2003, Breno Coelho wrote:
>
>
>
> I had trouble to install my video
>
> Could you help me?
>
> I am sending the log file
>
>
On Mon, 18 Aug 2003, Ken Copling wrote:
> hello i bought freebsd desktop edition and the x window didnt reconize my graphics
> card so now im wondering what would be a powerful graphics card to install on this
> system that x does reconize
Why doesn't it recognize your graphics card? We ne
doing some research with http://yourvote.com/pci once again,
XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a
Thanks alot for attention, I will try your patch in the next two days
(it's after midnight here now).
I really had *hoped* that a possibility to probe a hardware register
existed...
Egbert Eich schrieb:
[EMAIL PROTECTED] writes:
>
> That has been months ago. Now: one problem solved, others rem
This is the eror i saw when i tried startx command can u help
please
[EMAIL PROTECTED] achun]$ startx
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove
/tmp/.X0-lock
and start again.
When reporting a problem related to a serv
Title: Správa
I have some problem with starting xfree86 at
home. Can you help me, please? log file included.
Thanks
Radoslav Kukula
REPLY TO: [EMAIL PROTECTED]
<>
XFree86.0.log
Description: Binary data
On Mon, 18 Aug 2003, nanda gopal wrote:
> P4M266a Mercury Chipset",dispaly card is "S3 graphics prosavage
> FATAL SERVER ERROR
> NO SCREEN FOUND
I am NOT sure abt the support for the S3. So try to install in new
release of X OR Try to reconfigure ur X using XConfigurator.
Again if you get the s
> Hello XFree86 community,
>
> I have the following problem:
>
> When I start X, I am not able to use the keyboard. Any key pressed results in X
> switching resolution mode. No characters occur.
>
> I don't know how to fix this problem.
>
> If you have any suggestion, please let me know
See
http:/
Hi all,
When i run gedit from Xterm . i get the following error.
But still i can run gedit with no problem.
Paras.
--
bash-2.05a# gedit
** (gedit:852): WARNING **: Couldn't load font "Sans Regular 10" falling
back to "Sans 10"
** (gedit:852): WARNING **: Couldn't load font "Sans R
41 matches
Mail list logo
