Dear Sir
My system (Linux 6.0) is not recognising display
adapter
Adapter Sis 6215
Monitor 14' color Resolution:
1024*768 Non Interlaced,
Synchronization : Horizontal 30 KHz-54KHz(auto)
Vertical 50 Hz-120 Hz (Auto)
Video Band Width: 85 MHz at 30 dB
Rgs
JP
On 2004.02.05 06:06, Martti Kuparinen wrote:
I tried that but it didn't work. I even tried with different
combinations
of UseBIOS, NoDDCValue and NoAccel without any luck. I've attached
the logfile if that helps anything.
Does this mean that the via driver and/or CLE266 is really that
crappy
and
Luc Verhaegen wrote:
On 2004.02.05 06:06, Martti Kuparinen wrote:
I tried that but it didn't work. I even tried with different
combinations
of UseBIOS, NoDDCValue and NoAccel without any luck. I've attached
the logfile if that helps anything.
Does this mean that the via driver and/or CLE266 is rea
I want to be able to use an external monitor with an Asus M3N laptop with i855
chipset and integrated 64MB Intel graphics. The laptop has a SXGA+ 1400x1050
lcd, but so I still cannot use that resolution. I have still been unable to
get an acceptable display on an external monitor, and I hope s
On Thursday 05 February 2004 08:49, L. Jensen wrote:
> I want to be able to use an external monitor with an Asus M3N laptop with
> i855 chipset and integrated 64MB Intel graphics.
[snip]
> 1) The FnF8 key is supposed to toggle between lcd, lcd+crt, crt. For me it
> switches between lcd-only and cr
Hi,
When i tried startx in my redhat 9, this is the error i received.
please help
yours faithfully
vineeth
iit bombay
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i6
On Wednesday 04 February 2004 19:33, T. V. Vineeth _01007014_ wrote:
> When i tried startx in my redhat 9, this is the error i received.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Feb 5 01:32:44 2004
(==) Using config file: "/etc/X11/XF86Config"
Could you send these two files to the list?
Luc Verhaegen wrote:
The via driver has its modes pretty much hardcoded. The closest thing
in the open source driver is 1280x768.
Does anyone have any idea how these numbers are calculated and from what data?
via_mode.h
{ 1280, 768, 8, 0X54, 15, 0X432E, 0X622, { 160, 47, 16, 0X, ...
M
Title: Invitation to elegance
This
message is send by Bivolino.com.
Thank
You for the trust you have in us. Incase this message is unreadable or
incomplete, You can apply to:
http://www.bivolino.com/aktiel/keepintouch_en.html
This worked perfectly.
Bravo Tom et Merci
Cordialement,
Jean-Luc
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
on 02/05/04 08:49, L. Jensen wrote:
> I want to be able to use an external monitor with an Asus M3N laptop
with i855
> chipset and integrated 64MB Intel graphics. The laptop has a SXGA+
1400x1050
> lcd, but so I still cannot use that resolutio
Hi
I received an error message when trying startx in red hat 9. Pls help. i
attach the log file.
regards,
Vineeth
IIT Bombay
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3b
Hi all,
I'm about to buy a new computer, and I'm unsure of what graphics card to
buy.
Price should be less than $200 if possible.
The system will have dual-boot configuration:
Windows for gaming.
Linux for (real) work.
Currently I have a NVIDIA-card, but I do not want to buy another card, where
Ship along your log from /var/log/XFree86.0.log
and your config.
Alan.
On Thu, Feb 05, 2004 at 02:49:44AM -0500, L. Jensen wrote:
> I want to be able to use an external monitor with an Asus M3N laptop with i855
> chipset and integrated 64MB Intel graphics. The laptop has a SXGA+ 1400x1050
>
One of my students today damaged the screen of his laptop. He reported the
supplier of his notebook has told him that the damage to the screen has been
caused by partitioning the disk and using Mandrake 9.2 (that is XFree). The
notebook was sold with Windows XP (Home edition I think).
Have you
I am looking for the configuration file for the ViewsonicG70fm. Using Xfree
4.3.0 under Suse 8.2.
The configuration file I am presently using (the one for ViewsonicG70m) does
not work well .
--
Corrado Topi
- . -
e-mail: [EMAIL PROTECTED]
tel (direct): (+44) (0) 1484 47 3700
fax: (+ 44) (0) 148
Hi,
> I'm about to buy a new computer, and I'm unsure of
> what graphics card to
> buy.
Better go for ATI, ATI cards are having open-source
DRI drivers as nvidia suports binary only DRI drivers.
Radeon 9800 may be a best option.
Regards,
Suresh
_
On Thursday 05 February 2004 12:56, you wrote:
> ÷ ÓÏÏÂÝÅÎÉÉ ÏÔ 5 æÅ×ÒÁÌØ 2004 15:34 Corrado Topi ÎÁÐÉÓÁÌ(a):
> > I am looking for the configuration file for the ViewsonicG70fm. Using
> > Xfree 4.3.0 under Suse 8.2.
> >
> > The configuration file I am presently using (the one for ViewsonicG70m)
> >
Yes, I know how to configure it! :-)
The problem is I do not have the specification of the monitor, installed suse
(who does not have the specific configurations for this monitor) and so I do
not know what to put on the range.
If someone has a configration file for the same monitor I can simply
Ð ÑÐÐÐÑ ÐÑ 5 ÐÐÐÑÐÐÑ 2004 16:14 Corrado Topi ÑÐÐ(a):
> On Thursday 05 February 2004 12:56, you wrote:
> > Ã Ã ÃÃ 5 ÃÃÃ 2004 15:34 Corrado Topi
> > ÃÃÃ(a):
> > > I am looking for the configuration file for the ViewsonicG70fm. Using
> > > Xfree 4.3.0 under Suse 8.2.
> > >
> >
On Thursday 05 February 2004 12:47, Suresh Chandra Mannava wrote:
> Hi,
>
> > I'm about to buy a new computer, and I'm unsure of
> > what graphics card to
> > buy.
>
> Better go for ATI, ATI cards are having open-source
> DRI drivers as nvidia suports binary only DRI drivers.
>
> Radeon 9800 ma
T. V. Vineeth _01007014_ wrote:
> Could not init font path element unix/:7100, removing from list!
>
> Fatal server error:
> could not open default font 'fixed'
Your X server is configured to use a X Font Server (xfs), so it needs to be
running. As root, "/sbin/service xfs start". You likely wan
Hi Folks,
I'm not sure if this is the right way
to go about this type of inquiry. I am a brand new user who is attempting
to install red hat linux 9. It seems as though the files were installed
correctly, however when I boot I receive the following message:
hda:dma_timer_expiry:dma stat
I need a help please
Descripcion problem:
execve failed for /etc/X11/X (errno 2)
thanks
_
MSN Amor: busca tu ½ naranja http://latam.msn.com/amor/
___
XFree86 mailing list
[EMAIL PROTECTED]
ht
anybody know something about this chipset?In ati there aren't, I know
that is for Pentium IV Mobile but I want to know if is suportted by linux.
Sorry I'm spanish my english is very bad
_
Charla con tus amigos en línea mediante
Rotate options in all drivers were broken by the RandR extension.
You need to disable RandR with:
Option "RandR" "0"
in the Section "ServerFlags"
Mark.
On Thu, 5 Feb 2004, Alexey Nezhdanov wrote:
> Hello. I've just began to use rotation option of nv driver (in fact I've t
Hi, first pls excuse my bad english
Finally is going to be support for 3D aceleration in xfree 4.4 ???
I tried to see the cvs change log with no luck to understand whats was
there.
Is there some place where i can see this information ??
Is there a way a can help ??
Thanks and regards
Marcel MM
Thomas Racine wrote:
>
> hda:dma_timer_expiry:dma status==0x20
> hda:timeout waiting for dma
> hda:timeout waiting for dma
> hda:status error:status=0x58
> {DriveReady SeekComplete DataReq1uest}
> hda:drive not ready for command
That appears to be an IDE hard drive (hda is the master on the 1st
According to the server output and lspci, you only have one
graphics card in the system. There can be only one AGP
device in a system. Add-in AGP cards always disable the
integrated AGP adaptor. Typically, you can only use add-in
PCI cards simultaneously with integrated graphics.
Hello,
I have just hooked up my new Radeon 9200SE using the DVI output to an
NEC LCD 1880SX DVI input, and after putting the line
Options "MonitorLayout" "TMDS, CRT"
into XF86Config, am getting consistent performance. Unfortunately, it
is also very consistent that the signal is complete
MailMarshal (an automated content monitoring gateway) has
not delivered the following message:
Message: B1c2e2.0001.mml
From:[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Hi
This is due to automatic rules that have determined that the
intended recipient is not au
Mark Vojkovich wrote:
According to the server output and lspci, you only have one
graphics card in the system. There can be only one AGP
device in a system. Add-in AGP cards always disable the
integrated AGP adaptor. Typically, you can only use add-in
PCI cards simultaneously with integrate
Luis Martín Díaz wrote:
> Dear Mr.:
>
> I've a PC with OS LINUX Mandrake 9.1 and I've a problem.
> My PC start up ok but the X windows doesn't run.
> It tell me:
> Fatal server error
> could not open default font 'fixed'
> I send you the configurations files and the logs file too.
Philippe GUICHARD wrote:
> My configuration :
> Mainboard : Shuttle FX41 (with S3 ProSavage8 integrated)
> Graphic card : Sapphire ATI Radeon 9600xt on the AGP port
> Monitor : Hyundai ImageQuest Q17 : connected to the DVI port of the
> Radeon AGP card)
(--) PCI:*(1:0:0) ATI Technologies Inc unkno
Hi,
I'm using XFree86 4.3.99.902 on VIA KM400 chipset with NetBSD-current.
X works fine now but I've a problem with my keyboard. I can't write
anything on any programs. If I start aterm, when I type, nothing
appear in it, the cursor does not move. I think it works but there is
no output
On Thu, Feb 05, 2004 at 11:45:47AM +0100, Per Dalgas Jakobsen wrote:
>
> I'm about to buy a new computer, and I'm unsure of what graphics card to
> buy.
>
> Price should be less than $200 if possible.
> The system will have dual-boot configuration:
> Windows for gaming.
> Linux for (real) work.
Well, if linux is just for work, do you really need the capabilities of
the drivers? I'd just buy a Nvidia card and use the vesa or 'nv' driver,
and then get the latest drivers for you gaming in Win-blows. IMO, you
can't beat the geforce4 series when it comes to bang for the buck. a
Ti4200 is ~$100
>> I'm about to buy a new computer, and I'm unsure of
>> what graphics card to buy.
>
> Better go for ATI, ATI cards are having open-source
> DRI drivers as nvidia suports binary only DRI drivers.
>
> Radeon 9800 may be a best option.
I have been looking at an ATI Radeon 9600 XT/TVD.
Would there b
On Thursday, February 05 2004 10:04 am, Corrado Topi wrote:
> Yes, I know how to configure it! :-)
>
> The problem is I do not have the specification of the monitor,
> installed suse (who does not have the specific configurations for
> this monitor) and so I do not know what to put on the range.
>
Title: can't start xwindow and XFree86.0.log
version: netBSD 1.6
symptom: after installed netBSD, changed rc.local to enable kdm, reboot, then X Server crashed.
__ XFree86.0.log
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release
On Wednesday 04 February 2004 13:57, Christian Kremser wrote:
> Thanks for your reply! I modified my XF86Config-4 file as
> you suggested. But again this configuration isn't
> working. Only the upper half of the screen is dispalyed
> (with flickering stripes) and the lower half is grey. It's
> sim
Hello All,
I'm having trouble getting the Xnest server to allow clients access when
running as a second server on the same workstation. (I probably won't do
this in practice, but I'd like to know why it's not allowing access.) One
server starts OK. Then I'll start the second server, Xnest, on anot
On Thu, Feb 05, 2004 at 12:47:49PM +, Suresh Chandra Mannava wrote:
> Hi,
>
> > I'm about to buy a new computer, and I'm unsure of
> > what graphics card to
> > buy.
>
> Better go for ATI, ATI cards are having open-source
> DRI drivers as nvidia suports binary only DRI drivers.
>
> Radeon 9
Mark Vojkovich wrote:
Rotate options in all drivers were broken by the RandR extension.
You need to disable RandR with:
Option "RandR" "0"
in the Section "ServerFlags"
Mark.
Thanks. I will try it today.
Then another question: is there any method to use xrandr to rotate
screen. I've tr
Corrado Topi wrote:
Yes, I know how to configure it! :-)
The problem is I do not have the specification of the monitor, installed suse
(who does not have the specific configurations for this monitor) and so I do
not know what to put on the range.
If someone has a configration file for the same
Chad Carr wrote:
Boot-> no signal (solid black screen).
CTRL-ALT-BS -> login screen.
Login, Logout -> no signal.
CTRL-ALT-BS -> login screen.
CTRL-ALT-BS -> no signal.
CTRL-ALT-BS -> login screen.
CTRL-ALT-BS
Aloha
I'm setting up FreeBSD on an inherited system with an unknown monitor. I'm in need of
the HorizSync and VertRefresh settings.
The label on the back has the following info
A PLUS INFO CORP
Model AS1570
Serial # MB5S52002694
Manufactured March 19, 2002
I've googled for the monitor specs an
HI:
Another thing. The log send me these
error:
NVIDIA(0): Failure to construct a valid mode
list:no modes remaining.
NVIDIA(0); Aborting
NVIDIA(0): Screens(s) found, but none have a usable
configuration.
When I delete the Option "MetModes", the X run, but
the second monitor stay off
On Fri, 6 Feb 2004, Alexey Nezhdanov wrote:
> Mark Vojkovich wrote:
>
> > Rotate options in all drivers were broken by the RandR extension.
> >You need to disable RandR with:
> >
> > Option "RandR" "0"
> >
> >in the Section "ServerFlags"
> >
> >
> > Mark.
> >
> >
> >
> Thanks. I
49 matches
Mail list logo
