Try starting your X font server. As root, run '/etc/init.d/xfs start' .
Then see if it works. If so, set xfs to start at boot.
http://www.google.com/search?q='cannot find default font fixed'
Craig Ringer
___
XFree86 mailing l
this is the problem, and you have some idea why
it might not be setuid root, you can make the XFree86 binary setuid root
using "chmod u+s" as root.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
m a console, as root,
try running
"/etc/init.d/xfs start"
and then starting X.
How are you trying to start X anyway? You didn't say if you're running
it from "startx", via a display manager, or what.
Craig Ringer
___
XFr
luck with the suggestions I made in my last mail on
this - check out the xdmcp setup on the sun box and make sure the
networking is going ok. Of course, if you know that both of these are
fine, and there's nothing in the logs on the sun box, that
ately, boot into single user mode (this is a boot option in
most distros) and reconfigure X from there. I don't know what setup tool
mandrake uses - drakx comes to mind, but perhaps Xconfigurator is right.
Perhaps someone who uses mandrake can post with the correct one?
Craig Ringer
_
you follow the documentation link
you'll be able to find:
http://www.xfree86.org/~dawes/4.3.0/Status6.html#6
pretty quickly.
I expect the reason you got no response is because the documentation was
already on the website.
Craig Ringer
___
XFree
that it falls within the monitor's
limits where it picks a higher rate for 1024x768? Did you try reducing
your HSync and VRefresh rates a bit to see if that helped?
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
st somewhat well behaved. Hell,
it'll deal with OpenServer
'luck
Craig Ringer
I'm not familiar with the "-query" switch. But a black
screen and cursor is all you're expected to get when you
run "X". I think you want "startx -- :1"
It runs an
I have a new Toshiba laptop with an NVidia-based card. The screen can do
a resolution of 1600x1200.
I tried to use my Gnome control panel
to increase the font size, and that works for many applications, but a
number of applications, notably mozilla, and xmms, still use painfully
tiny fonts. I'd ra
cing
your HSync and VRefresh rates a bit to see if that helped?
Craig Ringer
Yeah pretty certain, my monitor has a nice little message box for whenever
it recieves out of range refresh rates. This is exactly like power managed
sleep.
I like that - too many cheap monitors just go into powersave
reason launching kdm didn't work - for example, if it for some reason
had not been installed. He mentioned that he was able to launch KDE
manually, so a startx based approach was likely to work.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
attached the XFree96.0.log file. Thanks in
advance :)
Try
rm -f /var/log/XFree86.0.log
as root. It might help?
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
n't with XFree86 but
somewhere in your system config (what clients you're starting, etc).
What happens if you just run "X :1" on the console?
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
managers and apps aren't keyboard
navigation friendly... :-(
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
lt.
Editing "/etc/sysconfig/desktop" and changing whatever the default
desktop shown there is to "KDE" should also work.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
I keep getting about 50 to 60 e-mails a day from
people who have problems with setting up XFree on
their machines.
I presume you joined the [EMAIL PROTECTED] mailing list?
I signed up for your newsletter, some how these
e-mails are being directed to me.
It's a mailing list. Whenever anybo
script assumes? I mean
"downgrading" makes me a bit suspicious.
The XFree86 3.3 binaries included in Debian 3.0 are built against the
same glibc as the rest of the system, and it won't matter. If you're
considering building your own XFree86 3.3.x then I suggest that you
e
the (somewhat overblown in the first place) router issue.
Forget I mentioned it.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Hehe..have a look at
http://linux.schottelius.org/blacksheep/
and you know why I disrecommend use of nvidia products
Hmm... I think you can safely remove the linksys one now.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/
doing XDMCP queries vary with different
display managers and X servers, but yours should have some documentation
on it.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
t but replace the faulty
hardware. If you can test with another video card or something just to
make sure, that'd be a good idea.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
XF86Config (or XF86Config-4 if appropriate) and xfree86
log file.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
cripts not XFree86. If you're using a custom .xinitrc or
.xsession, it's time to read over those and make sure you haven't made
any mistakes.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
i wanna open a browser-window when the USB-Memory-Stick is inserted.
execution of any program on
insert works as well as opening a browser-window. the problem is, that the
hotplug script runs under
root and i can't tell the users x-server to open the browser.
If the browser you're talking about
omeone else will be able to tell you whether or not it's an issue with X.
3 In the log seems nv dont supports My Geforce Fx5200 ? I see only Fx 5800
written
Wouldn't be surprised, but I'm not sure. Try looking at the
documentation
, a local linux user
group, or your linux distro's technical support offerings.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
#x27;generic 17" ', etc. Alternately, if it's not correctly identifying
your video card, you may be able to get it to work by specifying the
'vesa' driver instead.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
st-numbered free display
(that is, free port). It'd be good to be able to run just 'startx' not
'startx -- :n' where n is the lowest free display ID
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
nothing is showing up in logs as far
as i can tell. It didn't start before X worked though. Furthermore, now
that X is set up, my terminals are completely unusable. Every other
letter is shifted about half a screen off.
Are you using the normal text consoles, a VESA console, or some native
frame
Running the same system as below, I eventually got X working. However,
after about 20 minutes it up and dies. It just hangs and won't go
anywhere. can't even ctrl+alt+del.
CTL-ALT-Backspace is more likely to be useful under X, actually. This
will kill the X server. CTL-ALT-DEL is only captured
ly
nothing about this I've checked:
Doesn't sound like an X problem at all, actually.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
would
greatly appreciate it. Attached is my config file and log.
If you're running gpm as well as XFree86, try stopping gpm before you
fire up XFree86 and see if that helps.
Just an idle suggestion.
Craig Ringer
___
XFree86 mailing list
[
ly just another Savage type, but renamed.
Craig Ringer
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
t the window manager (or whatever you use) are started with
'&' so that they're run in the background. For example,
xterm &
wmaker
instead of
xterm
wmaker
since the former will cause an xterm to start up and the script to not
continu
can nybody help me out???
http://www.google.com/search?hl=en&lr=&ie=ISO-8859-1&q=%22could+not+open+default+font+%27fixed%27%22&btnG=Google+Search
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
35 matches
Mail list logo