XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X
Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if
your card is
newer than the above date, look for a newer
version before
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21-0.13mdksmp i686 [ELF]
Build Date: 12 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest
respected sir/madam
i have purchased Redhat Linux 8.0 cds i have install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution
my system monitor is Samsung SyncMaster 753s 17''
my
respected sir/madam
i have purchased Redhat Linux 8.0 cds i have install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution
my system monitor is Samsung SyncMaster 753s 17''
my
respected sir/madam
i have purchased Redhat Linux 8.0 cds i also install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution
my system monitor is Samsung SyncMaster 753s 17''
my
respected sir/madam
i have purchased Redhat Linux 8.0 cds i also install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution it will hanging
as well as not any action please give
respected sir/madam
i have purchased Redhat Linux 8.0 cds i also install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution it will hanging
as well as not any action please give
You need to upgrade your XFree86 version to 4.3 OR you need to
use NVIDIA's binary Linux drivers which will work with your current
XFree86 version.
Mark.
On 22 Jun 2003, shanmugham senthil kumar wrote:
respected sir/madam
i have purchased Redhat Linux 8.0 cds i
The problem lies with the Nvidia nforce chipset utilised with the Asus A7n266-VM motherboard. I have the same mobo and am using the same version of Redhat Linux. To fix this problem you need to first install in text mode, taking care NOT to install/setup the Xserver first. Then, get hold of audio
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]
Build Date: 27 February 2003
Build Host: porky.devel.redhat.com
Before reporting problems, check
send us a pointer on whom to contact on linux
system admin's .
please do send us a pointer on sys ad for newbies
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
To Whoever it may concern,
I had the following problem while trying to run Mandrake 9.0
(see attachment)
--
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release
Hello,
My Xserver on a Debian dist. won't start anymore when I'm not root.
I've tried Cygwin on another windows computer to make export display from my
debian server. I used the command (in Cygwin) : run setxkbmap -layout fr (it was
recommanded in the doc I found on the internet).
Export display
XFree86.0.log
Younus Bilal Ahmad
UBL ITT Division,
Head Office,
I.I.C Road.
XFree86.0.log
Description: XFree86.0.log
, June 18, 2003 9:16 AM
To: [EMAIL PROTECTED]
Subject: [XFree86] (no subject)
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Okay it happened my Linux crashed - Well more like X11 crashed, I had to perform an
alt backspace on it as it had frozen up.
Yes I know leaving my system virtually zero disk space to work with is unsound,
nevertheless it happened leading to a crash
Then again it's not like I haven't
Hi all,
What should I do to make my X application work on logout screen ? Currently my application just blocks in the XGetImage call, when logout button is clicked from menu. Is there a change of screen, or the default root window at this stage. Is there any XEvent that I can get when this screen
hi,
I am
having the following problem after installing Linux7.3 while trying to start
XWindows by giving the command "startx" .please help me
justin
University[EMAIL PROTECTED]---
- Original Message -
From:
Rizvi Inamdar
To: [EMAIL PROTECTED]
Sent: Thursday, June 12, 2003 6:04
PM
Subject: [XFree86] (no subject)
Hi,
I am unable
On Thu, 12 Jun 2003, Rizvi Inamdar wrote:
what is the command used for configuring X windows. In 7.x ver xconfig
was there but in linux8 this is not there.
redhat-config-xfree86
--
Bharathi S, IndLinuX Team, (__)
DON Lab,TeNeT Group, oo )
IIT-Madras, Chennai-INDIA. (_/\
Learn
hi
I think the command is Xconfigurator try it
Medhat
Rizvi Inamdar wrote:
Hi,I
am unable to configure X windows in linux 8.what
is the command used for configuring X windows. In 7.x ver xconfig was there
but in linux8 this is not there.the
error i am getting is Fatal server error:no
screens
On Wednesday, June 4, 2003 5:43 am, Ulrich Schwarz wrote:
hello,
i have a problem with x11: my compute server is not able to open a
display on my machine. why?
Check xauth and xhost.
--
Andy Goth | [EMAIL PROTECTED] | http://ioioio.net/
End communication.
hello,
i have a problem with x11: my compute server is not able to open a
display on my machine. why?
thanks...
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
_
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail
___
XFree86 mailing list
[EMAIL PROTECTED]
I cant get X to to use my mouse...
It load up the cursor but when i move the mouse it
jump straight to top left hand corner, i have tried editing the XF86config with
differnt varibles but i constantly stays the same, the first time i booted linux
after install it was fine but then after
Respected Sir,
I tried to install Mandrake 9.0. When I tried to start GUI, an error occurred and it asked to check the folowing log file, which i'm sending as an attachment.
I have an onboard NVIDIA Ge-Force II MX integrated.
Please, give me a reply as soon as possible
Catch the Oscar fever.
-
Hot Mobiil - helinad, logod ja piltsõnumid!
http://portal.hot.ee
XFree86.0.log.old
Description: XFree86.0.log.old
Well it gave me a message saying that i should send
this to you ... i cant load an X server ... here is the file ... email me if you
need more info
Ryan Rood New feature added to website -
WebMailhttp://www.abatoncomputers.com/cgi-bin/webmail.cgi
Abaton Computers Internet
Services
Ma'am,
You're using an out-of-date X version. Upgrade to 4.3. If you can't do that
try setting your color depth to 8 instead of 16.
HTH,
cyn
-Original Message-
From: Sujith [mailto:[EMAIL PROTECTED]
Sent: Monday, March 24, 2003 2:19 AM
To: [EMAIL PROTECTED]
Subject: [XFree86
This is onboard graphics of my motherborad. Use the nv driver but not
working correct display. Can u help me.
Rajesh S
On Fri, 21 Mar 2003, Mark Vojkovich wrote:
You have specified the Matrox mga driver, yet there is
no Matrox card showing up in your system. Use the nv
driver if
. If you can't do that
try setting your color depth to 8 instead of 16.
HTH,
cyn
-Original Message-
From: Sujith [mailto:[EMAIL PROTECTED]
Sent: Monday, March 24, 2003 2:19 AM
To: [EMAIL PROTECTED]
Subject: [XFree86] (no subject)
Sir,
This is the error message when
You specified depth 16.
The VGA driver you are trying to use only supports depth 1 and 4,
which is why it is failing. There may be better support for this
chip in newer XFree86 versions so that you don't have to revert
to the plain VGA driver.
Mark.
On Mon, 24 Mar
On Mon, 24 Mar 2003, Rajesh.S wrote:
This is onboard graphics of my motherborad. Use the nv driver but not
working correct display. Can u help me.
Rajesh S
You have two options:
1) Upgrade to XFree86 4.3. While this chip is supposed to be supported
in 4.2, I have reports that many
Sir,
This is the error message when installed lred hat linux 7.1 on Intel PIV
1.7Ghz. the XFree86 is not started and here is the problem cut and pasted
down below.,
XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
If
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
You have specified the Matrox mga driver, yet there is
no Matrox card showing up in your system. Use the nv
driver if you want to drive the onboard graphics of your
motherboard.
Mark.
___
XFree86 mailing list
[EMAIL PROTECTED]
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See
can you tell me if it is normal to have
DEFAULT.SFM, DEFAULT4.SFM, DEFAULT8.SFM, fileson my system folder running
XP Pro...not set up for networking???
thank you
my email ad is [EMAIL PROTECTED]Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
helo, I'm posting from Japan.
I want to use VineLinux2.5(for PC), but can't install by XFree86 fatel
error.
I use a monitor that MITSUBISHI RDT173M producted Feb.2002 in Japan.
If You want to know this Display's spec, please check below.
http://www.nmv.co.jp/mitsubishi/product/rdt173m
hi, all
I meet some problem when I install XFree86.
I run
% xinit xclient
some error occurs and X server exit:
The XKEYBOARD keymap compiler (xkbcomp) report:
Error: Cannot open compiled/server-0.xkm to write keyboard
description
Exit
Couldn't load XKB keymap, falling back to
Elio F. Panting
Tel. (504) 556-9696,(504) 552-8483
Charla con tus amigos en línea mediante MSN Messenger: Haz clic aquí
XFree86.0.log
Description: Binary data
Install the standard font pack...
Tom
On Saturday 08 March 2003 21:39, Elio F. Panting wrote:
htmldiv style='background-color:'DIV
DIV
DIV/DIV
DIV/DIVBRBRBR
DIV/DIV
DIV/DIV
DIVSTRONGElio F. Panting/STRONG/DIV
DIV/DIV
DIVTel. (504) 556-9696,nbsp;(504) 552-8483/DIV
DIV/DIV
DIVnbsp;/DIV
Try adjusting your hsync values in the config file.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Monday, March 03, 2003 11:54 PM
To: [EMAIL PROTECTED]
Subject: [XFree86] (no subject)
Hi,
I am attaching a log file for my RedHat 8.0.93 installation
On Mon, 3 Mar 2003 [EMAIL PROTECTED] wrote:
Hi,
I am attaching a log file for my RedHat 8.0.93 installation
That's Red Hat's second _experimental_beta-test_ of the upcoming 8.1.
Since that there's been another pre-release of 8.0.94. Should you be
running that if you don't know how to read an
Hi,
I am attaching a log file for my RedHat 8.0.93 installation
with ATI Radeon 7500 All-In-Wander card. Graphic system
does not start; I am getting Fatal server error: no
screens found.
Is this enough info to identify the problem?
Thanks,
Slava
XFree86.0.log
Description: Binary data
I cant find the extract.exe or extract file. Can you help?
_
Protect your PC - get McAfee.com VirusScan Online
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
___
XFree86
Hola yo tengo una Tarjeta de Video ATI Rage 128
Pro,de 32MBy no jala con mandrake 9, ya me canse de buscarle, pero no le
encuetro como hacerle para hacerlo jalar en modo grafico, he tratado de usar el
startx pero me dice que les escriba a ustedes, por favor ayudenme.
Hasta luego
Mauricio
unable to start xserver on intel 845 video chip (IBM monitor E54 )
.Attched is output of 'startx' and 'scanpci -v' .
Regards
Sudarshan
xfree86.log
Description: Binary data
unsubscribe
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Got the error report when trying to use the /usr/X11R6/bin/X :3 -query ip
address
going from linux to Sun Solaris 8
Can you help?
XFree86.3.log
XFree86.3.log
Description: Binary data
(See attached file: XFree86.0.log)
XFree86.0.log
Description: Binary data
Witaj xfree86!
--
Pozdrowienia,
fafcio_wp mailto:[EMAIL PROTECTED]
Futszak: --- L A C Z Y N A S C O R A Z W O L N I E J ---
0202122 - darmowy dostep do internetu juz od 3 tys. zl / mies.
--- KORZYSTAJ Z DIAL-UP TP SA - TWOJEGO ULUBIONEGO OPERATORA
How can i get my Microsoft WheelMouse to work in FreeBSD
i thought it was suppose to be added to the xf86config:
option Buttons 5
option ZAxisMapping4 5
___
XFree86 mailing list
[EMAIL PROTECTED]
Please use a subject next time.
I have a MS wheel mouse. The relevant section of my XF86Config file is:
Section InputDevice
Identifier Mouse1
Driver mouse
Option Protocol IMPS/2
Option Device /dev/psaux
Option ZAxisMapping 4 5
EndSection
On Fri, 2003-02-14 at 08:34, nathan
Quoting nathan [EMAIL PROTECTED]:
I got it working, with these settings in /etc/rc.conf:
moused_enable=YES
moused_flags=-z 4 5
moused_port=/dev/psm0
moused_type=auto
And /etc/X11/XF86Config:
Section InputDevice
Identifier Mouse0
Driver mouse
Option
X windows was working fine, then one day i went to startx and got this. OS
is Mandrake 9.0
XFree86.9.log
Description: Binary data
does X work with this card guys? i'd like to know becase i'm building a
machine soon and was going to use this card.
On Sunday 09 February 2003 09:59 pm, Mark Miles wrote:
Having problems with an ATI Radeon 9700 card from a Dell computer,
attached is my scanpci -v and XFree86.0.log
freebsd#
Having problems with an ATI Radeon 9700 card from a Dell computer,
attached is my scanpci -v and XFree86.0.log
freebsd# scanpci -v
pci bus 0x cardnum 0x00 function 0x00: vendor 0x8086 device 0x1a30
Intel Device unknown
CardVendor 0x1695 card 0x4001 (Card unknown)
STATUS0x2090
confirm 221691
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
ý have a porblem with my redhat 7.0 installation
(ý can not start graphics mode session)
the log file is at the attacment
and also my graphics card is asus v7100 geforce 2mx
has redhat 7.0 a driver for it ?
__
Do you Yahoo!?
Yahoo! Mail Plus -
On Wednesday, 22 Jan 2003, frank wrote:
I just installed Nvidia drivers; and since I havent been able to start X.
Im sure there is a simple solution for this.. Please email me at:
[EMAIL PROTECTED]
snip
(II) LoadModule: glx
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II)
I am on the mailing list but I do not receive the daily digest anymore.
In XF86Config for 4.2.99.3 there are more keyboards to choose from
than fit on a single page. Please convert the selection to a
multiple page display.
[EMAIL PROTECTED]
301 - 364 of 364 matches
Mail list logo