On Fri, 18 Aug 2006 [EMAIL PROTECTED] wrote:
"XPRESS 200" is just a marketing name, and like many such doesn't really mean
much, given that, over the years, the same name has often been used for
different adapters. Sometimes, _very_ different.
So, in order to really make sure you're not miss
[EMAIL PROTECTED] wrote:
-- Original message --
From: Marc Aurele La France <[EMAIL PROTECTED]>
"XPRESS 200" is just a marketing name, and like many such doesn't really mean
much, given that, over the years, the same name has often been used for
different ada
-- Original message --
From: Marc Aurele La France <[EMAIL PROTECTED]>
>
> "XPRESS 200" is just a marketing name, and like many such doesn't really mean
> much, given that, over the years, the same name has often been used for
> different adapters. Sometimes, _v
On Sat, 5 Aug 2006 [EMAIL PROTECTED] wrote:
Hi! I'm looking at getting a new PC and the one I'm looking at has an
integrated ATI Radeon XPRESS 200 video adapter.
I looked at the XFree86 4.6.0 ATI Radeon driver list of supported hardware
and didn't see the XPRESS 200 listed:
http://xfree86
Hi! I'm looking at getting a new PC and the one I'm looking at has an
integrated ATI Radeon XPRESS 200 video adapter.
I looked at the XFree86 4.6.0 ATI Radeon driver list of supported hardware and
didn't see the XPRESS 200 listed:
http://xfree86.org/4.6.0/radeon.4.html
Is the ATI Radeon XPRES
You probably only have one FontPath specified in the XF86Config -
the "unix/:7100" path which means it should get the fonts from a font
server, which probably isn't running. You either need to run
the font server (xfs) or add some specific font paths, eg...
FontPath "/usr/X11R6/lib/X11/f
I used the Redhat 9.0. I have a problem when I start the computer, I cannot
start the X server. Please see the following information:
I cannot start the X server (your graphical interface). It is likely that it is
not set up correctly.
(= =)log file:"/var/log/XFree86.0.log"
(= =)Using config fi
David Dawes wrote:
> Can you exit the server normally, without this problem?
Yep.
> Does it happen
> every time you attempt to switch to another terminal?
I believe so, but it seems to happen when I issue the Ctrl-Alt-F7 key
sequence. Other Ctrl-Alt-Fn keysequences (like Ctrl-Alt-F3) do nothing.
On Thu, Mar 16, 2006 at 07:05:19PM -0800, Tom Williams wrote:
>David Dawes wrote:
>>> Sounds good! Are you aware of this issue I posted about a few days ago:
>>> http://www.mail-archive.com/xfree86@xfree86.org/msg20133.html
>>>
>>
>> I haven't been able to reproduce this. It might be specific
David Dawes wrote:
>> Sounds good! Are you aware of this issue I posted about a few days ago:
>> http://www.mail-archive.com/xfree86@xfree86.org/msg20133.html
>>
>
> I haven't been able to reproduce this. It might be specific to the
> driver/hardware. Is it something that you can reproduce r
On Thu, Mar 16, 2006 at 09:25:33AM -0800, Tom Williams wrote:
>David Dawes wrote:
>> On Thu, Mar 09, 2006 at 07:53:41AM -0800, Tom Williams wrote:
>>
>>> David Dawes wrote:
>>>
On Wed, Mar 08, 2006 at 05:54:02PM -0500, David Dawes wrote:
> On Wed, Mar 08, 2006 a
David Dawes wrote:
> On Thu, Mar 09, 2006 at 07:53:41AM -0800, Tom Williams wrote:
>
>> David Dawes wrote:
>>
>>> On Wed, Mar 08, 2006 at 05:54:02PM -0500, David Dawes wrote:
>>>
>>>
On Wed, Mar 08, 2006 at 08:23:17AM -0800, Tom Williams wrote:
> H
On Thu, Mar 09, 2006 at 07:53:41AM -0800, Tom Williams wrote:
>David Dawes wrote:
>> On Wed, Mar 08, 2006 at 05:54:02PM -0500, David Dawes wrote:
>>
>>> On Wed, Mar 08, 2006 at 08:23:17AM -0800, Tom Williams wrote:
>>>
Hi! I just installed the XFree86 4.5.99.901 snapshot (which fixed
On Thu, Mar 09, 2006 at 07:53:41AM -0800, Tom Williams wrote:
>David Dawes wrote:
>> On Wed, Mar 08, 2006 at 05:54:02PM -0500, David Dawes wrote:
>>
>>> On Wed, Mar 08, 2006 at 08:23:17AM -0800, Tom Williams wrote:
>>>
Hi! I just installed the XFree86 4.5.99.901 snapshot (which fixed
David Dawes wrote:
> On Wed, Mar 08, 2006 at 05:54:02PM -0500, David Dawes wrote:
>
>> On Wed, Mar 08, 2006 at 08:23:17AM -0800, Tom Williams wrote:
>>
>>> Hi! I just installed the XFree86 4.5.99.901 snapshot (which fixed my
>>> xterm installation problem, thanks guys! :)) and it runs fin
Mark Vojkovich wrote:
>It would appear as though -autoconfig is broken. Can you
> do -configure instead? It used to be able to generate a working
> config file.
>
> Mark.
>
Ok, that worked just fine, using the original, unpatched XFree86 code.
The attached XF86Config.
David Dawes wrote:
> On Wed, Mar 08, 2006 at 05:54:02PM -0500, David Dawes wrote:
>
>> On Wed, Mar 08, 2006 at 08:23:17AM -0800, Tom Williams wrote:
>>
>>> Hi! I just installed the XFree86 4.5.99.901 snapshot (which fixed my
>>> xterm installation problem, thanks guys! :)) and it runs fin
Mark Vojkovich wrote:
>It would appear as though -autoconfig is broken. Can you
> do -configure instead? It used to be able to generate a working
> config file.
>
> Mark.
>
Will do and I'll report my findings here. :)
Peace...
Tom
__
On Wed, Mar 08, 2006 at 05:54:02PM -0500, David Dawes wrote:
>On Wed, Mar 08, 2006 at 08:23:17AM -0800, Tom Williams wrote:
>>Hi! I just installed the XFree86 4.5.99.901 snapshot (which fixed my
>>xterm installation problem, thanks guys! :)) and it runs fine. I
>>wanted to try the "-autoconfig"
On Wed, Mar 08, 2006 at 08:23:17AM -0800, Tom Williams wrote:
>Hi! I just installed the XFree86 4.5.99.901 snapshot (which fixed my
>xterm installation problem, thanks guys! :)) and it runs fine. I
>wanted to try the "-autoconfig" option to see what it would do and it
>generated these messages:
It would appear as though -autoconfig is broken. Can you
do -configure instead? It used to be able to generate a working
config file.
Mark.
On Wed, 8 Mar 2006, Tom Williams wrote:
> Hi! I just installed the XFree86 4.5.99.901 snapshot (which fixed my
> xterm install
Hi! I just installed the XFree86 4.5.99.901 snapshot (which fixed my
xterm installation problem, thanks guys! :)) and it runs fine. I
wanted to try the "-autoconfig" option to see what it would do and it
generated these messages:
Required symbol fbdevHWLoadPalette from module
/usr/X11R6/lib/mod
Marc Aurele La France wrote:
> On Mon, 6 Feb 2006, Tom Williams wrote:
>
>> Hi! I´ve been running XFree86 4.5.0 on my Linux system since it was
>> first release without problems. I replaced an old Nec XE17 monitor with
>> a Dell E771a this morning and I can no longer get X to start in
>> [EMAIL P
On Mon, 6 Feb 2006, Tom Williams wrote:
Hi! I´ve been running XFree86 4.5.0 on my Linux system since it was
first release without problems. I replaced an old Nec XE17 monitor with
a Dell E771a this morning and I can no longer get X to start in
[EMAIL PROTECTED] resolution. It will crank up to
Hi! I´ve been running XFree86 4.5.0 on my Linux system since it was
first release without problems. I replaced an old Nec XE17 monitor with
a Dell E771a this morning and I can no longer get X to start in
[EMAIL PROTECTED] resolution. It will crank up to [EMAIL PROTECTED] (I
believe) max.
I trie
hi
find it out at
http://intimate.handhelds.org/jacques/
here there is the bzip or gzip file
xc-011010.tar.bz2
download it & enjoy
Regards
Praveen
--- Zhan Zhaohua <[EMAIL PROTECTED]> wrote:
> Dear All:
> I want to use tiny-x in my embedded system, but
> I
> can't find the source of it
Dear All:
I want to use tiny-x in my embedded system, but I
can't find the source of it, could anyone tell me
where to download the source code of the latest
tiny-x?
Thank you.
Best regards
Zhan Zhaohua
2005.11.9
__
Yahoo! FareChase: Sear
On Monday, 19. September 2005 13:13, [EMAIL PROTECTED] wrote:
> I have a Compaq Armada running Linux Xfree86, and its orking fine.
> Bu I would like to kow, a place to get software to install on it, because
> Here in Brazil its har to find out.
try http://freshmeat.net/search/?q=x11 or http://www.
I have a Compaq Armada running Linux Xfree86, and its orking fine.
Bu I would like to kow, a place to get software to install on it, because
Here in Brazil its har to find out.
Angel Portal
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org
On 8/14/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> This XFree86-configure is on all Linux Flavors?
Running 'XFree86 -configure' to automatically generate a semi-working
configuration is a general XFree86 thing, not a distro-specific thing.
So, yes, it's available on all Linux distributions
This XFree86-configure is on all Linux Flavors?
Angel Portal
[EMAIL PROTECTED]
On Fri, 12 Aug 2005, sharam wrote:
> Hello good day
> I've installed RedHat 9.0 but something is wrong with
> X
> I've attached the log file
>
>
>
>
> __
> Do you Yahoo!?
> Yahoo! Mail -
On Wed, May 11, 2005 at 09:20:45PM -0400, Evan McIlvride wrote:
>I recently purchased a Dell Inspiron 1200 Laptop and have been trying to
>get XFree86 working on my machine. My chipset is the Mobile Intel
>910GML and the graphics card is the Intel Graphics Media Accelerator
>900. I'm trying to ge
On Wed, 2005-05-11 at 21:20 -0400, Evan McIlvride wrote:
> I recently purchased a Dell Inspiron 1200 Laptop and have been trying to
> get XFree86 working on my machine. My chipset is the Mobile Intel
> 910GML and the graphics card is the Intel Graphics Media Accelerator
> 900. I'm trying to get i
I recently purchased a Dell Inspiron 1200 Laptop and have been trying to
get XFree86 working on my machine. My chipset is the Mobile Intel
910GML and the graphics card is the Intel Graphics Media Accelerator
900. I'm trying to get it working on the most recent version of 'woody'
Debian. Accordin
On Tue, 22 Feb 2005, Tom Williams wrote:
Hi! Ok, I'm now running XFree86 4.5.0 RC2 woo-hoo! :)
I ran "XFree86 -configure" and it sniffed out my display gear and created a
XF86Config.new file. I tried it out and find I like the manually tweaked
settings in my XFree86 4.4.0 XF86Config file bett
Hi! Ok, I'm now running XFree86 4.5.0 RC2 woo-hoo! :)
I ran "XFree86 -configure" and it sniffed out my display gear and created a
XF86Config.new file. I tried it out and find I like the manually tweaked
settings in my XFree86 4.4.0 XF86Config file better (I run at a higher
resolution than wha
On Sat, Feb 12, 2005 at 11:14:11PM -0800, Tom Williams wrote:
>Hi! I've just installed XFree86 4.5.0 RC1 on my Slackware 8 based Linux
>system and so far it's running great! :)
>
>I tried running Gimp 2.2.3 and it complained about the fontconfig library
>being too old. I had fontconfig 2.2.x i
Hi! I've just installed XFree86 4.5.0 RC1 on my Slackware 8 based Linux system
and so far it's running great! :)
I tried running Gimp 2.2.3 and it complained about the fontconfig library being
too old. I had fontconfig 2.2.x installed before installing XFree86 4.5.0 RC1
and it seems the XFre
I have installed XFree86 and i tryed to run XFree86 -configure and it
freezes after it says "module loader present"
What should i do???
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.2 - Release Date: 20/12/2004
Hello,
I've compiled Kdrive with uClib for an old i486 PC.
But there's no PCI slot inside it. The video card is an ISA S3.
Can KDrive run on such a PC, or does it need a PCI bus ?
Thanks,
--
Bruno
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.
On Friday 28 May 2004 01:53, [EMAIL PROTECTED] wrote:
> I was just wondering if XFree86 can be used in windows.
> If it can, would you be able to briefly tell me where/how
> to get it?
Not XFree86 any more ... but http://x.cygwin.com/ should
provide what you need, using x.org as the basis.
--
B
Hi,
I was just wondering if XFree86 can be used in windows.
If it can, would you be able to briefly tell me where/how to get it?
Thanks,
Justin
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Hi,
In order to patch my kernel with the latest DRM drivers so that I enable direct
rendering with my SiS graphics card, I got the latest linux-drm-4.4.0-kernelsource
from http://www.xfree86.org/~alanh/
I untarred it in /usr/src/linux/drivers/char/drm/
Then I tried to compile it with "make -f M
I have a question about setting up a JamPad from KB Gear Interactive. In the
documentation, it states that all I'd have to do is tell it where my pad is and it
should work, but I haven't been able to get anywhere. Currently, the pad is used via
the USB 1.1 interface cable that comes with the pad
>>> Hi,
I'm running FreeBSD
>>> 5.2-Release and XFree86 Upon running startx I get the following
>>> error:
>>> execve failed for /usr/X11R6/bin/X (errno 2)
>>> _X11TransSocketUNIXConnect: Can't connect: errno = 2
>>> (last line repeated 5 times..
>>> giving up.
>>> xinit: No such file or directory
>>> Hi,
I'm running FreeBSD
>>> 5.2-Release and XFree86 Upon running startx I get the following
>>> error:
>>> execve failed for /usr/X11R6/bin/X (errno 2)
>>> _X11TransSocketUNIXConnect: Can't connect: errno = 2
>>> (last line repeated 5 times..
>>> giving up.
>>> xinit: No such file or directory
Hi all,
I've been searching the internet, various mailing list, usenet, and the
sourcecode, and i haven't been able to find the answer to my question:
Which spaceballs are working with Xfree?
Is this information available anywhere? any ideas?
I tried to get a spaceball 3003 to work with Xfree.
Quoth Chris Nickerson:
> I am having a problem with Mandrake 9.1 this is the error that I get
> Config Error: /etc/x11/xf86config:243
>
> Please can someone help me i'm new with this...
not unless you give us more information - we're good, but not *that* good
:-)
Looks like a problem in
I am having a problem with Mandrake 9.1 this is the error that I get
Config Error: /etc/x11/xf86config:243
Please can someone help me i'm new with this...
Christopher nickerson
_
The new MSN 8: smart spam protection and 2 month
Dear Colleagues,
I would like to ask you for help. Here is my problem:
My crontab launches twice a day a script which starts several times second X
server and vis5d ( which uses this second X server ) to produce a set of maps.
It is very annoying when I work on 1st graphic screen during work
Hello,
I am trying to setup the Linux 8.0 on a Dell Optiplex GX270 system.
Installation was a success, but can't bring up X-Windows. The diagnostic logs
indicate something about incorrect driver for the VGA. Can you show me how to
resolved this isuse?
Thanks.
Tony
**
hi xpert,
I have ported linux kernel & xserver to a specific PDA. Now I can't
rotate on the PDA. I have tried OPIE also, the application can be
rotated but the windows manager can not.
My question is: does the xrandr have any platform related codes? To
solve the problem, I should work on the ker
Hi,
I have a dell inspiron 4000 laptop with a native resolution of 1400x1050 which
I'm running mandrake 9.2 on. This is using XFree86 4.3.0 and kernel
2.4.18-23mdksmp. The video hardware is ATI Rage Mobility. In just the
laptop, everything works great.
Recently, I bought an external lcd mon
>I'm using two keyboard with single X. As far as I know, xkb extension
>controls keyboard events. It also maintains status of keyboard.
>(modifier, Locking.. etc)
You should do donkey work. Group all global variables and make it
locale attached on screen , window and so on.
>If I use two keyboar
Hi folks..
I'm using two keyboard with single X. As far as I know, xkb extension
controls keyboard events. It also maintains status of keyboard.
(modifier, Locking.. etc)
If I use two keyboard at the same time in single X, modifiers key events
affect the other keyboard's status. Am I right?
Can
Hi, I don't know if you can help me, but I was reffered here.The ATI website
doesn't offer any drivers for the radeon 7200. I am having problem with this
card since it does not seem to be supported by linux redhat 9. I have read
that you have to download a newer version of the x server... I was
Hi, I don't know if you can help me, but I was reffered here.The ATI website
doesn't offer any drivers for the radeon 7200. I am having problem with this
card since it does not seem to be supported by linux redhat 9. I have read
that you have to download a newer version of the x server... I was
If you want to run many versions of startx simultaneously you
need to run each one with a different server number. eg:
"startx -- :1"
"startx -- :2"
"startx -- :3"
Without the screen argument it defaults to :0
Mark.
On Wed, 20 Aug 2003, Anup Mandal wrote:
> Dear
Dear Sir,
My GUI in Red Hat linux distribution is working well.
When I run startx from one command prompt it is ok.But when try to start
from another console
it gives some error. How to configure the Xwindow so that i can run it
from six console.
Thanking You,
Anup Kumar Mandal
__
On Tue, 1 Jul 2003, Joseph Felps wrote:
> Is there a make(install) log that I can post? If so where would it be.
Er, wherever you put it. If you follow the instructions in INSTALL-X.org to
the letter, build results are in world.log, install results in
install.log. They'll be pretty big though, s
I have Putty and X-Win32 installed in my workstation, and I am trying to
log into the X-server on my network via remote SSH login. I keep getting
this error whenever I run startx on the command prompt:
Fatal server error:
PAM authentication failed, cannot start X server.
Perhaps you do n
On Tue, 1 Jul 2003, Joseph Felps wrote:
> What is the best version to use to compile X from source? I've compiled
> it and with 2.95.4 but I cannot get it to install without giving an error.
It should compile with any. I use 2.95.3. Your error is unlikely
to have anything to do with the com
William Gallafent wrote:
On Tue, 1 Jul 2003, Joseph Felps wrote:
What is the best version to use to compile X from source?
Who knows! I've used various of 3.2.x and 3.3, all with success.
I've compiled it and with 2.95.4 but I cannot get it to install without
giving an error.
Wha
On Tue, 1 Jul 2003, Joseph Felps wrote:
> What is the best version to use to compile X from source?
Who knows! I've used various of 3.2.x and 3.3, all with success.
> I've compiled it and with 2.95.4 but I cannot get it to install without
> giving an error.
What error?
--
Bill Gallafent.
What is the best version to use to compile X from source? I've compiled
it and with 2.95.4 but I cannot get it to install without giving an error.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
On Wed, 25 Jun 2003, Miles Roper wrote:
> would there be any compile time options in host.def you would recommend for
> minimal memory use?
>
I'm not sure. Most of the stuff gets built as modules. Most
of the stuff that's not a module is in the server because somebody
needs it. Compiler opt
On Wed, 18 Jun 2003, Miles Roper wrote:
> Really thanks for your indications!
>
> ...Do you also know something about these other libs, and in particular
> if they are really required?
>
> extensions/libdbe.a
This is the double buffer extension. No it's not strictly
required. The X screen
Really thanks for your indications!
...Do you also know something about these other libs, and in particular
if they are really required?
extensions/libdbe.a
extensions/libextmod.a
fonts/libbitmap.a
linux/libint10.a
Do you also have some particular suggestion to help us strip xf43 to the
minimum?
On 06/17/03 00:37 Miles Roper spoke thusly
Hi,
Several times the project I'm working on has had queries regarding what are
all the libraries used in XFree. Is there, or can, we get a description of
all the modules. The ones below are the ones we are most interested. We
are interested in this s
Hi,
Several times the project I'm working on has had queries regarding what are
all the libraries used in XFree. Is there, or can, we get a description of
all the modules. The ones below are the ones we are most interested. We
are interested in this so we can remove the unnecessary ones from th
I'm trying to find out whether or not XFree 4.3.0
is capable of supporting Radeon 8500/LE like ATI's drivers do for XFree 4.1/4.2.
I'm just trying to see whether or not it will be better to use this version of
XFree instead of using ATI's drivers for the sake of performance and
compatablity
Hi all,
In MS Win, I can set default unicode encoding (e.g. Thai or Chinese) for
applications which don't support unicode. It make me very convenient to
use all application without worrying about unicode support. Does XFree86
has the function like? If not, is there any plan to have this function
i
Just got my "this is your first post" message from the xfree86
list, and have a question of sorts
>Date: Sun, 12 Jan 2003 20:20:12 -0800
>From: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED]
>Subject: Auto-response for your message to [EMAIL PROTECTED]
>
>This is message is sent out on your first m
73 matches
Mail list logo
