On Fri, 2 Nov 2001, pesarif wrote:
>
> Hello!
>
> Is there a way to stop XDM from opening up a display?
Comment out the line in /etc/X11/xdm/Xservers which starts your server.
The line you don't want is probably something like:
:0 local /usr/X11R6/bin/X
Put a # at the start to disable th
I have just bought a new laptop which has a ATI Radeon Mobility LY display
adapter. The 4.1.0 XFree86 release does not include support for this card,
but the CVS source tree does. I've downloaded cvs tree and compiled it. The
server will configure itself correctly with a XFree86 -configure com
There's a new ViRGE test driver available today. If you have an MX,
GX2, or Trio3D I'm interested in test reports about how it works for
you.
A couple points of interest: ViRGE MX now includes XVideo support,
courtesy of Sven Menke. And some MX screen console corruption was
cleaned up with a co
> > Make World seems to go ok, but when I do install the install halts error
> > and doesn't install all of the files.
> >
>
> make World failed in the same place as your make install... In XFree86
> you'll need to check the World log for errors by searching, else you may
> miss things like th
Jarno Mikael Niemelä wrote:
>
>
>
> > > Make World seems to go ok, but when I do install the install halts error
> > > and doesn't install all of the files.
> > >
> >
> > make World failed in the same place as your make install... In XFree86
> > you'll need to check the World log for errors by
> I'm no expert on the bitmap module, and haven't seen anything like this
> before...
>
> You didn't happen to 'strip' the modules, did you? That would be bad.
What means 'strip' modules? I just checked out the sources from CVS,
skipped the Broken Savage with #define XFree86Cards ati nv
and com
Jarno Mikael Niemelä wrote:
>
>
> > I'm no expert on the bitmap module, and haven't seen anything like this
> > before...
> >
> > You didn't happen to 'strip' the modules, did you? That would be bad.
>
> What means 'strip' modules? I just checked out the sources from CVS,
> skipped the Broken
> The Install instructions (latest here
>
>http://cvsweb.xfree86.org/cvsweb/xc/programs/Xserver/hw/xfree86/doc/Install?rev=1.12&content-type=text/x-cvsweb-markup)
> have a manual install section (4) which gives requirements for the
> directory structure. I don't think you need any of this, becau
Hmm. It was better after I restarted X a few times. It was at 20M or
so for a while, but by the end of the day around 60M. I was away from
my computer for 2 hours or so and when I got back it was locked up(sysrq
worked)
I disabled dpms(caused problems with nvidia driver before?) and am
running
On Sun, 4 Nov 2001, [ISO-8859-1] Jarno Mikael Niemelä wrote:
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> Not loading .rodata.str1.1
> Not loading .rodata.str1.32
> Not loading .rodata.cst8
> Not loading .rodata.str1.1
> Not loading .rodata.str1.32
> Not loading .rodata.str1.1
> Not
On Sun, 2001-11-04 at 17:05, Jarno Mikael Niemelä wrote:
> > Maybe... There would be a ati_drv.o or similar name in the driver
> > directory. On the install it is normally in
> > /usr/X11R6/lib/modules/drivers. You could replace it with the one in
> > your CVS tree, however this may not work f
Around 14 o'clock on Nov 3, Jim Gettys wrote:
> Or we could have Xlib generate the error: that is easy, I think... It
> could still look as if it were generated as a protocol error.
Having Xlib generate the error is actually somewhat hard -- it would have
to generate a synthetic request (as a
Hi,
I've been having problems with a used Apple monitor I picked up recently. I
have an ATI Xpert 98 AGP card with a Tyan Trinity 400 motherboard. The
monitor is model M1823, and it dates from around 1995. I'm running XFree86
4.1.0 from Debian unstable. Linux kernel 2.4.2.
The problem is
Fixed.
On Sun, Nov 04, 2001 at 02:05:59AM +0900, ISHIKAWA Mutsumi wrote:
> > In <[EMAIL PROTECTED]>
> > Alan Hourihane <[EMAIL PROTECTED]> wrote:
> >> CVSROOT: /home/x-cvs
> >> Module name: xc
> >> Changes by:[EMAIL PROTECTED] 01/11/02 08:24:52
> >>
> >> Log message
On Sat, Nov 03, 2001 at 06:36:38PM -0800, Mark Vojkovich wrote:
> On Sat, 3 Nov 2001, Justin A wrote:
>
> > X seems to be leaking memory in the past two days. I had a 6 day uptime
> > and all was fine, but then X locked up(ran out of memory?).
> > After rebooting I upgraded to 2.4.14-pre7 and re
On Sun, 4 Nov 2001, Justin A wrote:
> Hmm. It was better after I restarted X a few times. It was at 20M or
> so for a while, but by the end of the day around 60M. I was away from
> my computer for 2 hours or so and when I got back it was locked up(sysrq
> worked)
>
> I disabled dpms(caused pr
Hi,
I'm writing a small control panel for XFree86 to alter the monitors gamma,
brightness and contrast.
This is the first version. I must write the code to manage profiles (and
clean up the code too!), so the panel will be able to save and load values
for the equations. In the mean time, the p
On Wed, 2001-10-31 at 08:40, Dimitri Aivaliotis SFI wrote:
> Here's something interesting I found, though. If I pass vga=792 to the
> kernel (to get a decent res on the boot messages), the flicker goes away
> when it's in runlevel 5. Actually, I've found that it doesn't have to
> do with the r
>
> I have just bought a new laptop which has a ATI Radeon Mobility LY display
> adapter. The 4.1.0 XFree86 release does not include support for this card,
> but the CVS source tree does. I've downloaded cvs tree and compiled it. The
> server will configure itself correctly with a XFree86 -con
Ed/Andy
Thanks for your responses
On Sun, 4 Nov 2001, Ed Hall wrote:
> What OS? What laptop? I have this working (on the LCD panel) on a
I'm using Linux 2.4.10 and a Dell Inspiron 4100. With a panel resolution of
1400x1050
> Check out the archives; there were some issues with the i2c drive
On Sun, 4 Nov 2001, Jarno Mikael Niemelä wrote:
>Date: Sun, 4 Nov 2001 17:32:22 +0200 (EET)
>From: Jarno Mikael Niemelä <[EMAIL PROTECTED]>
>To: Kevin Brosius <[EMAIL PROTECTED]>
>Cc: [EMAIL PROTECTED]
>Content-Type: TEXT/PLAIN; charset=US-ASCII
>List-Id: General X Discussion
>Subject: Re: Anyon
On Sun, 4 Nov 2001, Dr Andrew C Aitchison wrote:
>> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
>> Not loading .rodata.str1.1
>> Not loading .rodata.str1.32
>> Not loading .rodata.cst8
>> Not loading .rodata.str1.1
>> Not loading .rodata.str1.32
>> Not loading .rodata.str1.1
>> Not load
On Sun, 4 Nov 2001, Frank Murphy wrote:
> I've been having problems with a used Apple monitor I picked up recently. I
>have an ATI Xpert 98 AGP card with a Tyan Trinity 400 motherboard. The
>monitor is model M1823, and it dates from around 1995. I'm running XFree86
>4.1.0 from Debian unstable
Hi! First, sorry if this is an oft-discussed topic, but I can't find
archives for this list to check (can anyone give me a pointer?)
Second, I'm not subscribed to the list (most likely too much traffic for
me), so please CC me an replies.
Third, and most importantly, I was wonderin how to solve
On 4 Nov 2001, Sean Middleditch wrote:
> Third, and most importantly, I was wonderin how to solve a little
> issue... I have a latop with a touchpad, and I bought a USB mouse for
> it. Now, I have it configured so if when X starts up, and both mice are
> plugged in, they both work. but, if I p
25 matches
Mail list logo
