Hi:
Does anyone knows if the mouse problem with trident cards (mouse pointer
offset), is fixed in the 4.2 release?.
Thank you.
Federico
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
On Mon, 4 Feb 2002, David Brownell wrote:
The single user desktop model is well known to be the one
which is relatively straightforward to address -- and arguably hits
the 95% of end users case here. So long as one can kick in a
no gui mode for servers, and do something intelligent in the
Kernel boot logs this to messages file:
Feb 5 02:08:18 f1j xfs: ignoring font path element
/usr/X11R6/lib/X11/fonts/local (unreadable)
This has appeared for months and I can't figure out why?
Currently at kernel 2.4.18-pre8.
Thanks,
Frank
___
Hi,
Dr Andrew C Aitchison wrote:
The single user desktop model is well known to be the one
which is relatively straightforward to address -- and arguably hits
the 95% of end users case here. So long as one can kick in a
no gui mode for servers, and do something intelligent in the case
Mike A. Harris wrote:
On Sat, 2 Feb 2002, Luie delos Santos wrote:
Date: Sat, 2 Feb 2002 10:26:16 +0800
From: Luie delos Santos [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Content-Type: text/plain
List-Id: General X Discussion xpert.XFree86.Org
Subject: AccelGalaxy video card
Hello,
I've
Hi,
I have a little problem after upgrading my linux box from XFree 4.1.0 to
4.2.0: The Windows-Key (between the left Strg/Ctrl-Key and the Left
Alt-Key) is not recognized anymore.
I have a generic 105keys keyboard with german style. But it only works as
102keys keyboard after the upgrade,
Oliver Neukum wrote:
And what would the problem be with using an event distribution mechanism
that would require the listener to have certain privileges?
You may not want to base the distribution on privileges but on identity. eg
you want to associate some ports with some keyboards.
But in
Curse you, emacs!
I'm having trouble using both outputs on my Radeon VE: The second
Radeon device never prints anything, and the monitor on the dvi port
receives no signal. I also notice that the first screen listed in the
ServerLayout section ends up on the vga port, regardless of screen
On Tue, Feb 05, 2002 at 05:30:41AM -0300, Jorge F. Delgado wrote:
Does anyone knows if the mouse problem with trident cards (mouse pointer
offset), is fixed in the 4.2 release?.
We can't replicate the problem. But try it and let us know.
Alan.
___
On Tuesday 05 February 2002 02:22, Christer Palm wrote:
Oliver Neukum wrote:
Jim, if the user is logged in so is the rest of the user interface. Why
not have a monitoring program (like console) that watches the hotplug
events and invokes corresponding configuration program ? This would also
On Tue, 5 Feb 2002, Christer Palm wrote:
Oliver Neukum wrote:
And what would the problem be with using an event distribution mechanism
that would require the listener to have certain privileges?
You may not want to base the distribution on privileges but on identity. eg
you want to
On Tuesday 05 February 2002 02:54, David Brownell wrote:
Jim, if the user is logged in so is the rest of the user interface. Why
not have a monitoring program (like console) that watches the hotplug
events and invokes corresponding configuration program ?
Actually one of the goals of the
On Die, 2002-02-05 at 05:55, Jason wrote:
I'm having trouble using both outputs on my Radeon VE: The second
Radeon device never prints anything, and the monitor on the dvi port
receives no signal. I also notice that the first screen listed in the
ServerLayout section ends up on the vga
On Don, 2002-01-31 at 19:50, Vladimir Dergachev wrote:
On 31 Jan 2002, Michel [ISO-8859-1] Dänzer wrote:
On Mit, 2002-01-30 at 15:56, Vladimir Dergachev wrote:
On Wed, 30 Jan 2002, Vladimir Dergachev wrote:
http://gatos.sf.net/ - they were there last time I submitted a patch..
How do I get the -compstats option for lbxproxy to work. I never get any
statistics produced at all.
This e-mail and any attachments are confidential. If you are not the intended
recipient, please notify us immediately by reply e-mail and then delete this message
from your
Does anyone know if its possible to get 1400x1050 resolution support in the
framebuffer device, fbdev?
Saul.
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
On Die, 2002-02-05 at 15:36, Saul Simhon wrote:
Does anyone know if its possible to get 1400x1050 resolution support in the
framebuffer device, fbdev?
It supports whatever your framebuffer device supports. What's the
problem?
--
Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc)
Please also understand that commercial Linux is succeeding in server
systems. Designing just for single user desktops is very short-sighted;
commercially, much as I personally wish fervently otherwise, X desktops
are not currently important. But managing a server farm gracefully is
I have an Inspiron 4100, 1Ghz, 16MB Radeon Mobility M6 that I cannot
keep running for any length of time. The machine is pingable and I can
ssh into it, but the display is locked.
I have compiled a 2.4.18-pre7 kernel since it has the agpgart fixes, and
am using the latest radeon driver from
Billy Biggs wrote:
Mark Vojkovich ([EMAIL PROTECTED]):
Thanks, both of you, for your comments. My server still dies, but I'm
feeling a little more confident now.
On Mon, 4 Feb 2002, Steve Kirkendall wrote:
I'd be surprised if a voodoo card could do 2048x2048. It's one of the
worst
hey ...
just another info ...
the problem described earlier happends apprently at high resolution ...
at 800x600 it's good
so i guess it's the video-ram not keeping up with the speed of
everything else ...
take care boys/girls this xfree86 thingy is getting better and better !
Djamil
--
my card/screen can display up to 1400x1050 pixels, when I use the fbdev
driver for X, it registers the only allowable options as 1280x1024 and
1600x1200 (and some lower res modes).
Saul.
- Original Message -
From: Michel Dänzer [EMAIL PROTECTED]
To: Saul Simhon [EMAIL PROTECTED]
Cc:
4.1I used to run 4.2 but there were some things that did not seem stable
with my system and I reverted back to 4.1.
Can I just copy the new version of the fbdev driver or are there other
dependencies?
On Die, 2002-02-05 at 18:10, Saul Simhon wrote:
my card/screen can display up to
Hi there,
i im wondering if theres DH-Support for Radeon
Cards. Esp. for my new 7500...
While I was scanning through the drivers to see how
they and X11 work if found notes about that in the radeon_probe( i think it was)
source. Also mentioned is that this resource is marked as somewhat
On Mon, 4 Feb 2002, Billy Biggs wrote:
Mark Vojkovich ([EMAIL PROTECTED]):
On Mon, 4 Feb 2002, Steve Kirkendall wrote:
I'd be surprised if a voodoo card could do 2048x2048. It's one of the
worst overlay hardware. Doesn't seem to do the correct YUV-RGB
colorspace conversion either
Jose Fonseca wrote:
On Tue, 2002-02-05 at 14:50, James Hawtin wrote:
Is there a guide on how to setup DRI? I have never managed to ...
... to go to the DRI website and search for documentation? ;-)
Check http://dri.sourceforge.net/doc.phtml
It covers most of your questions!
On Tuesday 05 February 2002 09:10, you wrote:
Okay, I've looked at the GATOS CVS and tried the same Sync() calls. Has
been working fine on this PowerBook, but then I rarely ever experienced
crashes with it. Unfortunately, it doesn't seem to help the Rage128 Pro
card at work at all. I wonder
On Die, 2002-02-05 at 16:58, Davor Buvinic wrote:
On Tuesday 05 February 2002 09:10, you wrote:
Okay, I've looked at the GATOS CVS and tried the same Sync() calls. Has
been working fine on this PowerBook, but then I rarely ever experienced
crashes with it. Unfortunately, it doesn't seem to
On Tuesday 05 February 2002 13:57, you wrote:
On Die, 2002-02-05 at 16:58, Davor Buvinic wrote:
On Tuesday 05 February 2002 09:10, you wrote:
Okay, I've looked at the GATOS CVS and tried the same Sync() calls. Has
been working fine on this PowerBook, but then I rarely ever experienced
This is email regards the hw cursor garbling in mach64 based cards when
DRI is enabled.
The relevant parts of XFree86.0.log are:
(II) ATI(0): VESA VBE Total Mem: 4096 kB
...
(II) ATI(0): Storing hardware cursor image at 0xFD3FFC00.
(II) ATI(0): Using 8 MB linear
On 5 Feb 2002, Jose Fonseca wrote:
This is email regards the hw cursor garbling in mach64 based cards when
DRI is enabled.
[...]
So the fix is rather simple. My question is why having different
variables with apparent same meaning and with different values?
pATI-VideoRAM is
On 5 Feb 2002, Michel [ISO-8859-1] Dänzer wrote:
On Die, 2002-02-05 at 18:25, Davor Buvinic wrote:
On Tuesday 05 February 2002 13:57, you wrote:
On Die, 2002-02-05 at 16:58, Davor Buvinic wrote:
On Tuesday 05 February 2002 09:10, you wrote:
Okay, I've looked at the GATOS CVS and
Hi:
I've been trying X4.2 and it seems that the problem is solved.
Thank you.
Federico.
El Mar 05 Feb 2002 05:55, escribió:
On Tue, Feb 05, 2002 at 05:30:41AM -0300, Jorge F. Delgado wrote:
Does anyone knows if the mouse problem with trident cards (mouse pointer
offset), is fixed in the
I've checked in some experimental flat panel support for the
nv driver into CVS. WARNING: this is not well tested and
incorrect timings sent to flat panels can damage them! So use
it at your own risk.
You have to add:
Option FlatPanel
to the config file to turn on support since
On Tue, 5 Feb 2002, Kenneth Crudup wrote:
On Tue, 5 Feb 2002, Mark Vojkovich wrote:
WARNING: this is not well tested and
incorrect timings sent to flat panels can damage them! So use
it at your own risk.
Thank you for bringing up something I've wanted to know for a long time:
- I
This fixes the broken direct rendering problem seen by several people
on the XFree list and tracked to XvMC by Mike Harris. The issue
doesn't seem to actually be XvMC or XFree at all. As far as I can
tell XFree does correctly have direct rendering working. For some
reason the zero sized drmMap
Mark Vojkovich ([EMAIL PROTECTED]):
On Mon, 4 Feb 2002, Billy Biggs wrote:
Arguably we shouldn't be using the 601 transfer functions anyway, we
should use the ITU-R BT.709 ones instead since CRTs are likely
closer to the HDTV standard. I'd also add that MPEG2 video actually
specifies
Hi all,
I have FreeBSD 4.4 with Intel i810e graphics card.I installed
XFree86 4.2.0 which has support for i810e chip on FreeBSD.
When I start configuration for my X-Server crashes with following
log file.I even tried configuration with Xfree86 4.1.0 but same problem.
I already did all required
Hello,
I'm trying to get X to output to a Hantarex MTC 9000 arcade monitor.
With the attached configuration, I'm getting a horizontal band
covering about 1/5th of the screen's height that
displays perfectly, and that seems to follow the vertical location that
the mouse cursor would be at,
39 matches
Mail list logo
