Re: [yocto] [meta-mono][PATCH] mono-5.xx: fix an issue with too long paths in doltlibtool

On 18/06/2019 11:58, Alexander Kanavin wrote: > Ping #2! > > Alex Apologies for the long delay! The patch is in finally... -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto

Re: [yocto] meta-mono: QA Error building mono-5.12.0.226

On 22/11/2018 15:46, Martin Townsend wrote: Hi, This one is probably for the meta-mono maintainer I was getting quite a few file-rdeps QA errors. I managed to get rid of them all except 1 using RDEPENDS_${PN}-libs-2.0 += "mono" RDEPENDS_${PN}-libs-3.5 += "mono" RDEPENDS_${PN}-libs-4.0 +=

Re: [yocto] mono build issue

> On 7 Feb 2018, at 22:43, Máté Tüske wrote: > > Hi, > > I try to build custom image with mono. Previously I did it successfully, but > now I ran into some issue and I cannot solve it. > ERROR: mono-5.4.1.6-r0 do_package_qa: QA Issue: >

Re: [yocto] meta-mono 5.2.x recipe and pdb files

> On 18 Oct 2017, at 07:22, Craig McQueen wrote: > > I wrote: >> >> I'm trying to upgrade from mono 4.6.x to 5.2.x. I see resulting image size >> increases by about 10 MB in my usage. It appears that a significant >> contributing factor is the presence of *.pdb

Re: [yocto] mono 5.0.1.1 TypeLoadException

Hi Robin, If you supply a test case I’ll take a look. Regards, Alex > On 2 Oct 2017, at 15:02, MUGRIDGE Robin wrote: > > Hi, > > I am using mono with Krogoth. The current version of mono we are building > with is 4.2.2.30. > > I am trying to move mono forward

Re: [yocto] Problems running image in qemu (x86)

On 28/08/2017 10:32, Paul Eggleton wrote: > Hi Alex, > > On Sunday, 27 August 2017 1:09:49 AM NZST Alex J Lennon wrote: >> I'm bringing the Mono build up to date in the meta-mono layer and ran >> into a problem with my testing. >> >> I generally target QEMU, e.g.

[yocto] Problems running image in qemu (x86)

Hi, I'm bringing the Mono build up to date in the meta-mono layer and ran into a problem with my testing. I generally target QEMU, e.g. qemux86, build a core-image-sato based Mono test image and run up with 'runqemu qemux86' It's a remote build system so I am SSH'd in with VNC port forwarding

Re: [yocto] Transaction check error building core-image-mono with pyro

On 01/06/2017 15:57, Alex J Lennon wrote: > Hi, > > I'm updating the meta-mono layer with support to build the test > core-image-mono image under pyro (fine with morty). > > It's getting to the point where it starts to create the root > file-system image then fails with a tr

[yocto] Transaction check error building core-image-mono with pyro

Hi, I'm updating the meta-mono layer with support to build the test core-image-mono image under pyro (fine with morty). It's getting to the point where it starts to create the root file-system image then fails with a transaction check error: ... Running transaction check Transaction check

Re: [yocto] [meta-mono][PATCH 0/7] Updates to meta-mono layer

On 06/11/2016 04:22, Barry Grussling wrote: > I have a need to run Mono 4.6.1 on an ARM system. The last commit to > the yocto meta-mono tree is over six months old so I figured I would take > a crack at it myself. Hopefully these patches help somebody else. Merged and tested on qemux86. Many

Re: [yocto] [meta-mono][PATCH] mono-4.xx: Remove --disable-static from EXTRA_OECONF

On 27/06/2016 19:41, Fabio Berton wrote: > Any update on this? > Applied, thanks Fabio -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto

Re: [yocto] [meta-mono][PATCH] mono-4.xx: Remove --disable-static from EXTRA_OECONF

On 27/06/2016 20:41, Fabio Berton wrote: > Any update on this? > > Without this patch I can't build mono-4.4.0.148. Hi Fabio - I've been otherwise occupied and only just seen this. I will take a look at the patch. Many thanks, Alex -- ___ yocto

[yocto] [meta-mono] Re: ***UNCHECKED*** meta-mono patch

On 06/01/2016 20:44, Adam Lussier wrote: > Alex, > > I looked but couldn't find where I might submit a patch for meta-mono. > Without this patch, mono fails the host-user-contaminated test on > jethro. Please let me know if I should send it somewhere else. > > Thanks, > Adam > Applied, thanks

Re: [yocto] [meta-mono PATCH] mono-4.xx.inc: Inherit gettext class

On 16/12/2015 16:18, Otavio Salvador wrote: > The mono uses gettext for build, by default, so we ought to ensure it > is available during the build. > Applied. Thanks Otavio. Cheers, Alex -- ___ yocto mailing list yocto@yoctoproject.org

Re: [yocto] [meta-mono][PATCH] README.md: fix mailto links

On 23/11/2015 08:25, Roger Meier wrote: > Signed-off-by: Roger Meier > --- > README.md | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Applied, Thanks Roger. Cheers, Alex -- ___ yocto mailing list

Re: [yocto] OE/Yocto developer survey

On 26/10/2015 19:18, Cliff Brake wrote: > Hi, > > I'd like to get some feedback on the following questions -- feel free > to respond to list, or directly to me, and I'll withhold your > name/company from any results. > > I would like to collect feedback until 2015-11-02, and will summarize > the

Re: [yocto] [meta-chip] Yocto on the 9$ computer

On 24/10/2015 22:06, Andrei Gherzan wrote: > On Sat, Oct 24, 2015 at 09:46:41PM +0100, Alex J Lennon wrote: >> >> >> >> Sent from my iPhone >>>> On 24 Oct 2015, at 21:13, Andrei Gherzan <and...@gherzan.ro> wrote: >>>> >>>

Re: [yocto] [meta-chip] Yocto on the 9$ computer

Sent from my iPhone >> On 24 Oct 2015, at 21:13, Andrei Gherzan wrote: >> >>> On Sat, Oct 24, 2015 at 09:58:42PM +0200, Nicolas Aguirre wrote: >>> 2015-10-24 19:26 GMT+02:00 Andrei Gherzan : >>> Hi all, >> >> Hi Andrei, >> >>> Have a C.H.I.P. 9$

[yocto] [meta-raspberrypi][PATCH 1/2] userland: add .pc files for the OpenGLESv2 and EGL libraries

These pkg-config files make it easier for libepoxy to find those libraries and the appropriate link flags. Modified from Thomas Petazzoni's patch here: http://goo.gl/jdz7lO Signed-off-by: Alex J Lennon <ajlen...@dynamicdevices.co.uk> --- .../0004-rpi-userland-add-pkgconfig-files.patch

[yocto] [meta-raspberrypi][PATCH 0/2] Fix core-image-sato build failure

Builds of core-image-sato (userland) against poky master fail as libepoxy fails to build. This patch-set adds needed userland .pc files for libepoxy and adds needed paths for include files to the libepoxy recipe Alex J Lennon (2): userland: add .pc files for the OpenGLESv2 and EGL libraries

[yocto] [meta-raspberrypi][PATCH 2/2] libepoxy: add needed include paths for RPi

ref: https://github.com/raspberrypi/firmware/issues/34 Signed-off-by: Alex J Lennon <ajlen...@dynamicdevices.co.uk> --- recipes-graphics/libepoxy/libepoxy_git.bbappend | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 recipes-graphics/libepoxy/libepoxy_git.bbappend diff

[yocto] [meta-raspberrypi][PATCH] README: Add section on audio routing

See http://redmine.gherzan.com/issues/55 Signed-off-by: Alex J Lennon <ajlen...@dynamicdevices.co.uk> --- README | 36 +++- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/README b/README index e32de3a..e16dee9 100644 --- a/README +++ b/

[yocto] [meta-raspberrypi][PATCH v2] linux-raspberrypi: support configuration fragments / in-tree defconfig

nux-raspberrypi.inc: +SRC_URI += " \ +file://build-in-audio.cfg \ +" linux-raspberrypi/build-in-audio.cfg: +CONFIG_SND=y +CONFIG_SND_BCM2835=y Signed-off-by: Alex J Lennon <ajlen...@dynamicdevices.co.uk> --- recipes-kernel/linux/linux-raspberrypi.inc

Re: [yocto] [meta-raspberrypi][PATCH 2/2] linux-raspberrypi: build audio driver into kernel

On 21/10/2015 13:12, Andrei Gherzan wrote: > On Tue, Aug 25, 2015 at 09:00:06AM +0100, Alex J Lennon wrote: >> On 25/08/2015 07:57, Petter Mabäcker wrote: >>> >>> >>> 2015-08-17 11:23 skrev Alex J Lennon: >>> >>>> On 17/08/2015 09:11, P

Re: [yocto] [meta-raspberrypi][PATCH 2/2] linux-raspberrypi: build audio driver into kernel

On 21/10/2015 13:12, Andrei Gherzan wrote: > On Tue, Aug 25, 2015 at 09:00:06AM +0100, Alex J Lennon wrote: >> On 25/08/2015 07:57, Petter Mabäcker wrote: >>> >>> >>> 2015-08-17 11:23 skrev Alex J Lennon: >>> >>>> On 17/08/2015 09:11, P

Re: [yocto] meta-raspberrypi no soud output

On 15/10/2015 16:57, Edward Vidal wrote: > Hello All, > Does any have snd working on Raspberry Pi 2B? > > I have tried aplay speech_dft.wav > PLAYING WAVE: 'speech_dft.wav' : Signed 16 bit Little Endian, rate > 22050 Hz Mono > with ear plugs or speaker no snd. > Any and all help appreciated. >

Re: [yocto] can any one please tell the difference between DEPENDS and RDEPENDS

On 07/10/2015 07:10, Vivek Per wrote: > Hi, > Can any one please tell the what is the exact difference between > DEPENDS and RDEPENDS . I am not able to get it . How these variables > are exactly parsed. > > Vivek - does this help ?

Re: [yocto] [meta-raspberrypi][PATCH 2/2] linux-raspberrypi: build audio driver into kernel

On 25/08/2015 07:57, Petter Mabäcker wrote: 2015-08-17 11:23 skrev Alex J Lennon: On 17/08/2015 09:11, Petter Mabäcker wrote: 2015-08-17 09:57 skrev Andrei Gherzan: Hello, On Tuesday, August 11, 2015, Petter Mabäcker pet...@technux.se mailto:pet...@technux.se mailto:pet...@technux.se

Re: [yocto] [meta-raspberrypi][PATCH 2/2] linux-raspberrypi: build audio driver into kernel

On 17/08/2015 09:11, Petter Mabäcker wrote: 2015-08-17 09:57 skrev Andrei Gherzan: Hello, On Tuesday, August 11, 2015, Petter Mabäcker pet...@technux.se mailto:pet...@technux.se wrote: 2015-08-11 19:04 skrev Alex J Lennon: Signed-off-by: Alex J Lennon ajlen

Re: [yocto] [meta-raspberrypi][PATCH 2/2] linux-raspberrypi: build audio driver into kernel

On 17/08/2015 09:11, Petter Mabäcker wrote: 2015-08-17 09:57 skrev Andrei Gherzan: Hello, On Tuesday, August 11, 2015, Petter Mabäcker pet...@technux.se mailto:pet...@technux.se wrote: 2015-08-11 19:04 skrev Alex J Lennon: Signed-off-by: Alex J Lennon ajlen

Re: [yocto] [meta-raspberrypi][PATCH 1/2] linux-raspberrypi: support configuration fragments

On 12/08/2015 09:08, Petter Mabäcker wrote: 2015-08-11 21:20 skrev Alex J Lennon: On 11/08/2015 19:54, Petter Mabäcker wrote: 2015-08-11 19:04 skrev Alex J Lennon: - remove placeholder defconfig and custom copying logic - use KBUILD_DEFCONFIG for default in-tree configurations instead - do

[yocto] [meta-raspberrypi] RFC on choice of tool for patch review

We've been having a discussion on a way forward to manage patches and code review and would like to open this up for discussion to agree a way forward. Options appear to be github, gerrit, or bitbucket although there may be others. This is in addition to continuing to send patches to the mailing

Re: [yocto] [meta-raspberrypi] RFC on choice of tool for patch review

On 12/08/2015 10:45, Joshua Lock wrote: On Wed, 2015-08-12 at 10:25 +0100, Joshua Lock wrote: On Wed, 2015-08-12 at 10:17 +0100, Alex J Lennon wrote: We've been having a discussion on a way forward to manage patches and code review and would like to open this up for discussion to agree

Re: [yocto] [meta-raspberrypi][PATCH 1/2] linux-raspberrypi: Update kernel to 3.18.16

On 11/08/2015 08:58, Petter Mabäcker wrote: 2015-08-10 13:08 skrev Alex J Lennon: This requires some changes to KERNEL_DEVICETREE as the dtb layout has changed to support overlays. This change also makes us ready to support kernel 4.x series Signed-off-by: Alex J Lennon ajlen

[yocto] [meta-raspberrypi][PATCH v2 1/2] linux-raspberrypi: Update kernel to 3.18.16

This requires some changes to KERNEL_DEVICETREE as the dtb layout has changed to support overlays. This change also makes us ready to support kernel 4.x series Signed-off-by: Alex J Lennon ajlen...@dynamicdevices.co.uk --- conf/machine/include/rpi-base.inc | 22

[yocto] [meta-raspberrypi][PATCH v2 2/2] linux-raspberrypi: support kernel 4.1.3

Signed-off-by: Alex J Lennon ajlen...@dynamicdevices.co.uk --- recipes-kernel/linux/linux-raspberrypi_4.1.bb | 6 ++ 1 file changed, 6 insertions(+) create mode 100644 recipes-kernel/linux/linux-raspberrypi_4.1.bb diff --git a/recipes-kernel/linux/linux-raspberrypi_4.1.bb b/recipes-kernel

Re: [yocto] [meta-raspberrypi][PATCH 1/2] linux-raspberrypi: Update kernel to 3.18.16

On 11/08/2015 11:34, Petter Mabäcker wrote: 2015-08-11 11:03 skrev Alex Lennon: On Tuesday, August 11, 2015, Petter Mabäcker pet...@technux.se mailto:pet...@technux.se wrote: 2015-08-11 10:31 skrev Alex J Lennon: On 11/08/2015 08:58, Petter Mabäcker wrote

[yocto] [meta-raspberrypi][PATCH 1/2] linux-raspberrypi: support configuration fragments

- remove placeholder defconfig and custom copying logic - use KBUILD_DEFCONFIG for default in-tree configurations instead - do not replace all Yocto configured settings in do_configure_prepend see: https://bugzilla.yoctoproject.org/show_bug.cgi?id=7474 Signed-off-by: Alex J Lennon ajlen

[yocto] [meta-raspberrypi][PATCH 2/2] linux-raspberrypi: build audio driver into kernel

Signed-off-by: Alex J Lennon ajlen...@dynamicdevices.co.uk --- recipes-kernel/linux/linux-raspberrypi.inc | 4 1 file changed, 4 insertions(+) diff --git a/recipes-kernel/linux/linux-raspberrypi.inc b/recipes-kernel/linux/linux-raspberrypi.inc index e38d905..8024412 100644 --- a/recipes

Re: [yocto] [meta-raspberrypi][PATCH 1/2] linux-raspberrypi: support configuration fragments

On 11/08/2015 19:54, Petter Mabäcker wrote: 2015-08-11 19:04 skrev Alex J Lennon: - remove placeholder defconfig and custom copying logic - use KBUILD_DEFCONFIG for default in-tree configurations instead - do not replace all Yocto configured settings in do_configure_prepen see: https

[yocto] [meta-raspberrypi][PATCH 2/2] linux-raspberrypi: support kernel 4.1.3

Signed-off-by: Alex J Lennon ajlen...@dynamicdevices.co.uk --- recipes-kernel/linux/linux-raspberrypi_4.1.bb | 6 ++ 1 file changed, 6 insertions(+) create mode 100644 recipes-kernel/linux/linux-raspberrypi_4.1.bb diff --git a/recipes-kernel/linux/linux-raspberrypi_4.1.bb b/recipes-kernel

[yocto] [meta-raspberrypi][PATCH 1/2] linux-raspberrypi: Update kernel to 3.18.16

This requires some changes to KERNEL_DEVICETREE as the dtb layout has changed to support overlays. This change also makes us ready to support kernel 4.x series Signed-off-by: Alex J Lennon ajlen...@dynamicdevices.co.uk --- conf/machine/include/rpi-base.inc | 22

Re: [yocto] Which repo for meta-altera ?

On 28/07/2015 10:10, Spriggs, Jim wrote: Hi Guys; confused noob here... There appear to be (at least) two official repos for meta-altera: github.com/kraj/meta-altera and git.rocketboards.org/meta-altera.git So how should I choose between them? Thanks! -- Jim

Re: [yocto] [meta-mono] [RFC] [PATCH 0/1] Force MONO_CFG_DIR

Hi Richard, On 20/07/2015 19:11, Richard Tollerton wrote: Alex J Lennon ajlen...@dynamicdevices.co.uk writes: Out of image-full-mono these have problems without gmcs present, Looks like we need a solution for these three to use mcs instead of gmcs, mono-xsp_3.0.11.bb I guess I'm the least

Re: [yocto] [meta-mono] [RFC] [PATCH 0/1] Force MONO_CFG_DIR

Hi Richard, On 17/07/2015 19:44, Alex J Lennon wrote: On 17/07/2015 19:24, Richard Tollerton wrote: Alex J Lennon ajlen...@dynamicdevices.co.uk writes: Hi Richard, On 17/07/2015 17:57, Richard Tollerton wrote: Hi Alex, When you mentioned having weird build troubles, that reminded me

Re: [yocto] [meta-mono] [PATCH 00/11] Refactor common mono build bits into mono.bbclass

On 17/07/2015 10:19, Alex J Lennon wrote: On 17/07/2015 00:16, Richard Tollerton wrote: Building CLI packages involves lots of boilerplate recipe settings, particularly involving FILES and DEPENDS. This is a first attempt at refactoring these settings into a single bbclass that can

Re: [yocto] [meta-mono] [PATCH 00/11] Refactor common mono build bits into mono.bbclass

On 17/07/2015 15:43, Richard Tollerton wrote: Alex J Lennon ajlen...@dynamicdevices.co.uk writes: Richard, I'm having some trouble with builds here since that latest patch. Can you tell me, what version of Mono did you test against, and also did you have Mono installed out of tree

Re: [yocto] [meta-mono] [PATCH 00/11] Refactor common mono build bits into mono.bbclass

On 17/07/2015 00:16, Richard Tollerton wrote: Building CLI packages involves lots of boilerplate recipe settings, particularly involving FILES and DEPENDS. This is a first attempt at refactoring these settings into a single bbclass that can be inherited by all CLI packages that do not

Re: [yocto] [meta-mono] [RFC] [PATCH 0/1] Force MONO_CFG_DIR

Hi Richard, On 17/07/2015 17:57, Richard Tollerton wrote: Hi Alex, When you mentioned having weird build troubles, that reminded me that I was seeing weird build problems of my own, that I had been refraining from sending patches on until I could better characterize the issue. If you've

Re: [yocto] [meta-mono] [RFC] [PATCH 0/1] Force MONO_CFG_DIR

On 17/07/2015 19:24, Richard Tollerton wrote: Alex J Lennon ajlen...@dynamicdevices.co.uk writes: Hi Richard, On 17/07/2015 17:57, Richard Tollerton wrote: Hi Alex, When you mentioned having weird build troubles, that reminded me that I was seeing weird build problems of my own, that I

Re: [yocto] [meta-mono] [PATCH 4/4] mono-xsp-3.x.inc: use autogen.sh

On 16/07/2015 18:22, Richard Tollerton wrote: The following build failure was observed: | Makefile.am:7: error: BUILD_DOCS does not appear in AM_CONDITIONAL This occurs because aclocal must be called with -I build/m4/shamrock -I build/m4/shave, as is done in autogen.sh. I tried adding

Re: [yocto] [meta-mono] [PATCH 0/3] DEPENDS/RDEPENDS fixes

On 16/07/2015 02:29, Richard Tollerton wrote: These are fixes for build/runtime issues due to insufficient dependency specifications. The libgdiplus patches fix observed build failures; the gtk-sharp-dev patch is untested but pretty obvious. The following changes since commit

Re: [yocto] [meta-mono] [PATCH 0/1] mono: use PARALLEL_MAKEINST= instead of PARALLEL_MAKE=

On 16/07/2015 02:25, Richard Tollerton wrote: Hi, last week I sent out a patch to disable parallel builds in mono; in hindsight I should have used PARALLEL_MAKEINST instead of PARALLEL_MAKE. Patch follows. This is one of several topic branches I've hacked together over the last couple of

Re: [yocto] [PATCH] mono-4.xx.inc: disable parallel make

On 08/07/2015 21:07, Chris Morgan wrote: On Wed, Jul 8, 2015 at 6:49 AM, Alex J Lennon ajlen...@dynamicdevices.co.uk wrote: On 07/07/2015 21:17, Richard Tollerton wrote: A race was observed during `make install` of mono-native under PARALLEL_MAKE=-j6: Thanks Richard - patch applied

Re: [yocto] [PATCH] mono-4.xx.inc: disable parallel make

On 07/07/2015 21:17, Richard Tollerton wrote: A race was observed during `make install` of mono-native under PARALLEL_MAKE=-j6: Thanks Richard - patch applied Chris - I wasn't able to replicate the failure you see under Fedora F22 with PARALLEL_MAKE=-j 6. The build works for me here. Can you

Re: [yocto] meta-mono: Issue building 4.0.2.4

On 24/06/2015 01:01, Chris Morgan wrote: The double nested output folder looks odd to me but leaving that, it looks like a file is being installed twice. Anyone else seeing this? meta meta-skeleton = (HEADdetachedat16caaab):16caaabfcc678b03a0cd88aaeac15f9b8d1c3dad meta-yocto

Re: [yocto] Start openvpn with my own config at startup

Hi Matthew, On 27/05/2015 20:07, Matthew Karas wrote: I have an ovpn file I'd like my system to start up with. I was able to install the openvpn file into /etc/openvpn using a bbappends file - but the system doesn't start openvpn like the openvpn docs describes. How do I set up openvpn to

Re: [yocto] Help getting started developing.

Hi Rafael, On 26/05/2015 22:13, Rafael E. Herrera wrote: Hello, I have purchased a TI UEVM5432 board. I have also successfully setup the development environment as described on the online documentation from the TI web site

[yocto] Strange behaviour with stripped connman + openvpn

Hi, I've been looking at some strange behaviour with connman in dizzy (1.25) With OpenVPN configured and a connman configuration file defining a VPN, for some reason the service doesn't appear, e.g. connmanctl services In trying to track down why this is I found that if I use a connmand daemon

[yocto] Definition of native toolchain, support for -m32?

Hi, I'm having some trouble building chromium which I think is due to a definition in chromium.inc which uses the host compiler rather than the Yocto native compile toolchain CC_host=${BUILD_CC} export CC_host CXX_host=${BUILD_CXX} export CXX_host This seems to map to the gcc/g++ on my host

Re: [yocto] [meta-raspberrypi] meta-ivi meta-raspberrypi

On 29/04/2015 15:30, Oliver wrote: Hello I have been working building together the meta-raspberrypi the meta-ivi layers. I have been stuck with configuration/compilation of weston(from mata-ivi layer): 1) You can check the intial thread

Re: [yocto] [meta-raspberrypi] meta-ivi meta-raspberrypi

On 29/04/2015 16:34, Mauro Carvalho Chehab wrote: Em Wed, 29 Apr 2015 16:05:58 +0200 Alex J Lennon ajlen...@dynamicdevices.co.uk escreveu: On 29/04/2015 15:30, Oliver wrote: Hello I have been working building together the meta-raspberrypi the meta-ivi layers. I have been stuck

Re: [yocto] yocto master work-shared, kernel .config seems to have gone awol

On 30/03/2015 21:27, Burton, Ross wrote: On 30 March 2015 at 18:36, Alex J Lennon ajlen...@dynamicdevices.co.uk mailto:ajlen...@dynamicdevices.co.uk wrote: I'm updating to Yocto master and have been seeing that when I bitbake -c devshell virtual/kernel I go into a work-shared

[yocto] yocto master work-shared, kernel .config seems to have gone awol

Hi, I'm updating to Yocto master and have been seeing that when I bitbake -c devshell virtual/kernel I go into a work-shared tree now. (This is all with meta-fsl-arm) I'd normally change the kernel configuration with bitbake -c menuconfig virtual/kernel then pull out the .config and make my

Re: [yocto] [meta-raspberrypi][PATCH] make sound work out of the box for raspberrypi2

On 24/03/2015 09:21, Alex J Lennon wrote: On 24/03/2015 08:21, Andreas Müller wrote: On Tue, Mar 24, 2015 at 12:14 AM, Gary Thomas g...@mlbassoc.com wrote: On 2015-03-23 16:22, Andreas Müller wrote: On Mon, Mar 23, 2015 at 10:43 PM, Gary Thomas g...@mlbassoc.com wrote: On 2015-03-23 14:57

Re: [yocto] [meta-raspberrypi][PATCH] make sound work out of the box for raspberrypi2

On 24/03/2015 08:21, Andreas Müller wrote: On Tue, Mar 24, 2015 at 12:14 AM, Gary Thomas g...@mlbassoc.com wrote: On 2015-03-23 16:22, Andreas Müller wrote: On Mon, Mar 23, 2015 at 10:43 PM, Gary Thomas g...@mlbassoc.com wrote: On 2015-03-23 14:57, Andreas Müller wrote: On Mon, Mar 23,

Re: [yocto] [meta-raspberrypi][PATCH] make sound work out of the box for raspberrypi2

On 23/03/2015 16:59, Gary Thomas wrote: On 2015-03-22 14:21, Andreas Müller wrote: Signed-off-by: Andreas Müller schnitzelt...@googlemail.com --- ...-during-boot-by-compiling-SND_BCM2835-int.patch | 38 ++ recipes-kernel/linux/linux-raspberrypi_3.18.bb | 8 +++--

Re: [yocto] [meta-raspberrypi][PATCH] make sound work out of the box for raspberrypi2

On 23/03/2015 18:08, Gary Thomas wrote: On 2015-03-23 10:42, Alex J Lennon wrote: On 23/03/2015 16:59, Gary Thomas wrote: On 2015-03-22 14:21, Andreas Müller wrote: Signed-off-by: Andreas Müller schnitzelt...@googlemail.com --- ...-during-boot-by-compiling-SND_BCM2835-int.patch | 38

Re: [yocto] [meta-raspberrypi] RaspberryPi2 - no audio?

On 22/03/2015 21:17, Andreas Müller wrote: On Sun, Mar 22, 2015 at 1:25 PM, Andrei Gherzan and...@gherzan.ro wrote: Hello, On Sun, Mar 22, 2015 at 1:19 PM, Gary Thomas g...@mlbassoc.com wrote: I just built Poky/Yocto for the RaspberryPi2, straight out of the box using this configuration:

Re: [yocto] Embedded Linux Package Management

On 20/03/2015 11:15, Prasant J wrote: On Fri, Mar 20, 2015 at 2:21 PM, Alex J Lennon ajlen...@dynamicdevices.co.uk wrote: On 20/03/2015 09:34, Prasant J wrote: Hi, I'm looking for package management for my embedded linux systems (yocto on armv7 iMX6Q) I'm looking for the following

Re: [yocto] Embedded Linux Package Management

On 20/03/2015 09:34, Prasant J wrote: Hi, I'm looking for package management for my embedded linux systems (yocto on armv7 iMX6Q) I'm looking for the following features: (a) Install remove a package (b) Install packages and its dependencies (c) Install a package with conflicts, such

Re: [yocto] [meta-mono][PATCH] mono: Support to build mono without X support.

On 18/03/2015 15:23, Enric Balletbo i Serra wrote: Use PACKAGECONFIG to build a version of mono with or without X support in function of x11 DISTRO_FEATURES. Tested on qemux86 (mono using X) and imx6 board (mono without X) Signed-off-by: Enric Balletbo i Serra enric.balle...@collabora.com

[yocto] Kernel configuration fragments and defconfig from kernel source tree, not meta layer file

Hi, I've been looking into a request to have Yocto kernel configuration fragment support in meta-raspberrypi with a defconfig which is pulled from the kernel source tree for the configured machine. My understanding is that Yocto expects the defconfig file to be supplied in the meta-layer and

Re: [yocto] Kernel configuration fragments and defconfig from kernel source tree, not meta layer file

On 17/03/2015 21:08, Bruce Ashfield wrote: On Tue, Mar 17, 2015 at 1:57 PM, Alex J Lennon ajlen...@dynamicdevices.co.uk wrote: Hi, I've been looking into a request to have Yocto kernel configuration fragment support in meta-raspberrypi with a defconfig which is pulled from the kernel

Re: [yocto] Adding new library to yocto project

On 09/03/2015 17:50, Kfrell wrote: I am using Yocto and I just would like to integrate a new library in my project. I create a new recipe named libxerces which contains a file libxerces-3.1.1.bb. The bb file is quite simple and it is based on autotools : DESCRIPTION = Xerces-c is a

[yocto] [meta-mono] Update to 3.12.1 to address SKIP TLS / FREAK vulnerabilities

Hi, meta-mono master has been updated to build the latest Mono 3.12.1 release which addresses SKIP TLS / FREAK vulnerabilities in all prior Mono versions = 3.4.0. For further details see: http://www.mono-project.com/news/2015/03/07/mono-tls-vulnerability/ Basic testing has been performed on an

[yocto] Resizing root flash partition/filesystem on first boot

Hi, I'd like to be able to build an SD card image, deploy to a system and have it automatically resize on first boot. I haven't seen functionality that would do this in Yocto. If there is a setting for this could anybody let me know where that is? Alternatively if this isn't supported out of the

Re: [yocto] meta-qt5 problem in yocto 1.7

On 02/02/2015 04:27, peterengcomau...@adam.com.au wrote: Alex, I have completely separated daisy and dizzy. all of my daisy stuff goes into ~/poky-1.6 and I clone only daisy branches there such as poky, meta-openembedded, meta-qt5, etc. All of my dizzy stuff goes in ~/poky-1.7 so there is

Re: [yocto] meta-qt5 problem in yocto 1.7

On 31/01/2015 19:10, peterengcomau...@adam.com.au wrote: Hi Alex, Thanks for confirming the problem exists. I set QT_MODULE_BRANCH ?= dev in meta-qt5/recipes-qt/qt5/qt5-git.inc, but still get the same problem. Do I have the correct file ? Hi Lachlan, I'm sorry, I should been more

Re: [yocto] meta-qt5 problem in yocto 1.7

On 31/01/2015 19:10, peterengcomau...@adam.com.au wrote: Hi Alex, Thanks for confirming the problem exists. I set QT_MODULE_BRANCH ?= dev in meta-qt5/recipes-qt/qt5/qt5-git.inc, but still get the same problem. Do I have the correct file ? Lachlan, So I have been building for qemux86

Re: [yocto] meta-qt5 problem in yocto 1.7

On 01/02/2015 18:55, Simon Bolek wrote: Thanks! As for the examples. I cannot help directly, but i would read log.do_configure etc. files for details. You might find the reason there. Although I have to say, that my knowledge in yocto is at the beginners stadium at the moment ;-) cheers

Re: [yocto] meta-qt5 problem in yocto 1.7

On 01/02/2015 20:38, peterengcomau...@adam.com.au wrote: Hi Alex, I have no problem with qt5 with daisy and have been using it fine for over 6 months. During that time I have cleaned my tmp file multiple times which would force a new reload of the sources. Also I dont have a problem with

Re: [yocto] meta-qt5 problem in yocto 1.7

On 31/01/2015 13:30, peterengcomau...@adam.com.au wrote: Hello Martin, Thanks for your reply. I managed to fix the problem of referring to 5.4 instead of 5.3.2 by checking out the master branch instead of the dizzy branch of meta-qt5. However my problem is with the do_fetch. Most of the

[yocto] [meta-mono] Mono updated to 3.12.0

I've updated support for Mono build in meta-mono master to 3.12.0 (the current release). I've performed basic build testing on an qemux86 build of core-image-mono, based on core-image-sato, running a Hello World console application and a Hello World Windows Forms application. There has been

[yocto] [meta-mono] Mono updated to 3.10.0

I've updated support for Mono build in meta-mono master to 3.10.0 (the current release). I've performed basic build testing on an qemux86 build of core-image-mono, based on core-image-sato, running a Hello World console application and a Hello World Windows Forms application. There has been

Re: [yocto] CAN Support

Hi Daniel, On 07/10/2014 15:05, Daniel C. A (NESTIT) wrote: Hi, Presently im working on i.mx6 EVK for Automotive application. I have used 'fsl-image-gui' which was Bitbaked using Yocto-dora release. Since I'm worked on CAN interfaces, I got the following queries. 1.

[yocto] [meta-mono] Mono updated to 3.8.0

I've updated support for Mono build in meta-mono master from 3.4.0 to 3.8.0 (the current release). I've performed basic build testing on an x64 host targetting an i.MX6 platform and succesfully run up a commercial application which makes use of console / X. If anybody has the time and

Re: [yocto] RFC: Improving the developer workflow

Hi Paul, Personally with how fragile package management can end up being, I'm convinced that full-image updates are the way to go for a lot of cases, but ideally with some intelligence so that you only ship the changes (at a filesystem level rather than a package or file level). This

Re: [yocto] RFC: Improving the developer workflow

On 07/08/2014 10:10, Paul Eggleton wrote: Hi folks, As most of you know within the Yocto Project and OpenEmbedded we've been trying to figure out how to improve the OE developer workflow. This potentially covers a lot of different areas, but one in particular I where think we can have

Re: [yocto] RFC: Improving the developer workflow

On 07/08/2014 14:05, Paul Eggleton wrote: Hi Alex, On Thursday 07 August 2014 11:13:02 Alex J Lennon wrote: On 07/08/2014 10:10, Paul Eggleton wrote: fwiw Upgrade solutions are something that is still a read need imho, as I think we discussed at one of the FOSDEMs. (The other real need

Re: [yocto] [Tizen General] Build Tizen with yocto work-flow

On 04/08/2014 08:52, Kévin THIERRY wrote: On 02/08/2014 17:35, Alex J Lennon wrote: On 01/08/2014 17:36, Alex J Lennon wrote: On 01/08/2014 16:38, Alex J Lennon wrote: I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues

Re: [yocto] [Tizen General] Build Tizen with yocto work-flow

On 01/08/2014 22:55, Richard Purdie wrote: On Fri, 2014-08-01 at 15:13 +0100, Alex J Lennon wrote: Getting some errors here having followed the Using Scripts section. I am guessing it might be as I'm using Ubuntu 14.04 LTS x64 This is for MACHINE=genericx86 e.g. | make[3]: Leaving

Re: [yocto] [Tizen General] Build Tizen with yocto work-flow

On 01/08/2014 17:36, Alex J Lennon wrote: On 01/08/2014 16:38, Alex J Lennon wrote: I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;) No problem Kévin. I'm glad

Re: [yocto] [Tizen General] Build Tizen with yocto work-flow

On 02/08/2014 20:52, Khem Raj wrote: On Sat, Aug 2, 2014 at 8:35 AM, Alex J Lennon ajlen...@dynamicdevices.co.uk wrote: I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk. Both a Samsung laptop running from USB and a VirtualBox machine boot, but after

Re: [yocto] Build Tizen with yocto work-flow

On 31/07/2014 15:55, ronan wrote: Hi all, presently we are working on a project Tizen on Yocto that provides an alternative to gbs tools or OBS. - https://wiki.tizen.org/wiki/Tizen_on_yocto We are glad to announce the first release 0.1 of our project. The main features as the same

Re: [yocto] Build Tizen with yocto work-flow

On 01/08/2014 11:03, ronan wrote: Hi Alex I'm interested in trying this out. Presumably it should be trivial to add Mono support by pulling in meta-mono? Have you looked at this on ARM target platforms at all? e.g. i.MX6 ? No, we did not test it for ARM yet, but it's in the pipe. If

Re: [yocto] [Tizen General] Build Tizen with yocto work-flow

On 01/08/2014 11:07, Alex J Lennon wrote: On 01/08/2014 11:03, ronan wrote: Hi Alex I'm interested in trying this out. Presumably it should be trivial to add Mono support by pulling in meta-mono? Have you looked at this on ARM target platforms at all? e.g. i.MX6 ? No, we did not test

Re: [yocto] [Tizen General] Build Tizen with yocto work-flow

Hi Kévin, On 01/08/2014 15:38, Kévin THIERRY wrote: ls -l scripts/find-supplements{,.ksyms} ~/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git$ ls -l scripts/find-supplements{,.ksyms} -rw-r--r-- 1 ajlennon ajlennon 418 Aug 1 11:41 scripts/find-supplements -rw-r--r-- 1 ajlennon

Re: [yocto] [Tizen General] Build Tizen with yocto work-flow

On 01/08/2014 15:38, Kévin THIERRY wrote: Hi Alex, Can you check if the filesfind-supplements and find-supplements.ksyms exist by trying this please: bitbake rpm-native -c devshell ls -l scripts/find-supplements{,.ksyms} And tell us the output. I think it's the bash vs dash issue

Re: [yocto] [Tizen General] Build Tizen with yocto work-flow

I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;) No problem Kévin. I'm glad you feel it is of some use. I'm getting other recipes failing now with bash. What

  1   2   3   >