toolchain-gmae is exactly the toolchain-sdk. qte is for embedded qt
Robert P. J. Day rpj...@crashcourse.ca编写:
something that could be cleared up a bit in the docs ... how many
toolchain-related targets are there?
for instance, running bitbake suggests that common targets include
Please set SDKMACHINE to i686 in your local.conf when you building the cross
canadian compiler.
Best Regards,
Lianhao
From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] On
Behalf Of Elvis Dowson
Sent: Tuesday, June 12, 2012 11:15 PM
To: Yocto Discussion Mailing List
Navani Srivastava wrote on 2012-05-28:
Hi,
I am working with poky-bernerd-5.0. I have built cross-toolchain for qt with
bitbake -v meta-toolchain-qte for arm1136 architecture.
I got the tool chain poky-eglibc-i686-arm-toolchain-1.0.tar.bz2 under
build/tmp/deploy/sdk/ directory. On
Emirelkholy,
If the program is successfully transferred to the target by the Eclipse then I
assume the tcf-agent is already running. However please doublecheck the
followings:
- When you create connections, make sure you choose type TCF.
- Try to goto Remote system explorer(RSE) perspective,
Hi Darren,
Do you know how to use qemu to launch the core-image-minimal image build upon
the poky-tiny distribution?
I tried the following command but ended up in Kernel panic - not syncing: No
init found.
tmp/sysroot/x86_64-linux/usr/bin/qemu -kernel
/tmp/deploy/image/bzImage-qemux86.bin
jack wrote on 2012-04-14:
hi,all! I Use a pre-built image and run it in the QEMU emulator.
I have downloaded and installed
poky-eglibc-i686-i586-toolchain-gmae-1.1.1.tar.bz2, then I downloaded
bzImage-qemux86.bin and core-image-lsb-qt3-qemux86.ext3
but when
$ runqemu qemux86
: Lu, Lianhao [mailto:lianhao...@intel.com]
Sent: Tuesday, April 10, 2012 12:08 AM
To: Andy Gikling; yocto@yoctoproject.org
Subject: RE: ADT Manual v1.1.1 Issues - 2 of 3
Andy,
Could you please attach both the config.log file and the environment file
under the directory /opt/poky/1.1.1
Saul Wold wrote on 2012-04-11:
On 04/10/2012 08:16 AM, Lu, Lianhao wrote:
Hi Saul,
I think I might have some clues why the python-nativesdk failed at
http://autobuilder.pokylinux.org:8010/builders/nightly-x86/builds/433.
It's due to the commit
http://git.yoctoproject.org/cgit/cgit.cgi
Andy,
Could you please attach both the config.log file and the environment file under
the directory /opt/poky/1.1.1/ ?
Andy Gikling wrote on 2012-04-10:
All,
I've had very mixed results during the three or four times I've run through
the ADT manual from scratch. There seems to be a
Hi Beth,
Looks like the 1.1.1 rootfs on adtrepo was populated into a wrong URL. It
should be http://adtrepo.yoctoproject.org/1.1.1/rootfs/ instead of
http://adtrepo.yoctoproject.org/1.1.1/adt-ipk/rootfs/.
Hi Andy,
Please file a bug against 1.1.1. Before we got that fixed, you may tweak the
Huaming,
Could please include the following in your description, so we can have a clear
context for your problem? Thanks!
1. Host OS?
2. Which version of eclipse?
3. Which version of Yocto eclipse plugin?
4. Which image do you use as sysroot? core-image-sato or core-image-sato-sdk?
5. Which
Robert P. J. Day wrote on 2012-03-26:
currently, ch 5 of the reference manual claims that a generated
meta-toolchain tarball should be unpacked under /opt/poky, which
might be *historically* correct but i just baked a meta-toolchain and
its tarball contents are all prefixed with
-Original Message-
From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org]
On Behalf Of Xu, Dongxiao
Sent: Tuesday, March 27, 2012 2:49 PM
To: yocto
Subject: [yocto] Deleting layers in Hob
When using Hob in Yocto Project, I found a issue when deleting
Hi Saul,
How about this patch's merging status?
Best Regards,
Lianhao
Lu, Lianhao wrote on 2012-03-14:
Set the PREFERRED_VERSION of lttng-ust to use lttng-ust instead of
lttng2-ust in poky distro. This fixed yocto bug #2062.
The lttng2 is very different in terms of architecture and usage
Hi guys,
During the root causing of bug
#1968(http://bugzilla.pokylinux.org/show_bug.cgi?id=1968), we find that on
certain distributions, i.e. FC16 x86-64 and FC15 x86-64, the host libGL is
asking for glibc 2.14. But the eglibc we provided in meta-toolchain is 2.13.
This would prevent the
Ni Qingliang wrote on 2012-02-17:
thanks! another question:
why I must specify the sysroot location in eclipse plugin? the
environment-setup has it already.
In case you need another target sysroot which is different from the sysroot
defined in the environment files.
Best Regards,
Lianhao
Ni Qingliang wrote on 2012-02-17:
the environment-setup file in build tree had defined CFLAGS and CXXFLAGS
which include the sysroot argument(build_tree/tmp/sysroots/machine).
Do we must specify the sysroot location in the eclipse plugin?
after specify it, I found the CFLAGS CXXFLAGS in
James W. wrote on 2012-02-14:
How to locate Log file while a error occur.
It's under the directory ${WORKDIR}/temp/. Actually when an error occurs, you
can find the specific log file in the output, something like.
ERROR: Logfile of failure stored in:
Jack Mitchell wrote on 2011-10-25:
Hi Jessica,
I just did a full fresh re-build from scratch and now my environment
variables are as follows:
http://ix.io/1Wf
My current git status is:
# On branch edision # Untracked files: # (use git add file... to
include in what will be
Jack Mitchell wrote on 2011-10-24:
I am trying to use the new eclipse plugin, which I have had working
fine for the past couple of weeks until I switched from the master branch to
edison.
I performed a fresh build using the stable edison branch, installed
the new 1.1 eclipse plugin and
Hi Jack,
-Original Message-
From: yocto-boun...@yoctoproject.org
[mailto:yocto-boun...@yoctoproject.org] On Behalf Of Jack Mitchell
Sent: Friday, September 23, 2011 10:13 PM
To: yocto@yoctoproject.org
Subject: Re: [yocto] Eclipse Plugin 1.1-M4
On 23/09/2011 15:02, Jack Mitchell
Hi Enric,
Which version of the Yocto eclipse plug-in did you use? Have you configure the
plug-in as mentioned in manual section 4.1.3?
Best Regards,
-Lianhao
Enric Balletbò i Serra wrote on 2011-09-06:
Hi all,
Following http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.htm
Enric Balletbò i Serra wrote on 2011-09-06:
Hi Lianhao,
2011/9/6 Lu, Lianhao lianhao...@intel.com:
Hi Enric,
Which version of the Yocto eclipse plug-in did you use?
I'm using version 1.0 from
http://www.yoctoproject.org/downloads/eclipse-plugin/1.0 with latest
yocto mainline from git
Hi Jessica,
I noticed the we still use POKY_DISTRO_VERSION in the environment while some
other variables have changed their prefix to OECORE_ (e.g.
OECORE_NATIVE_SYSROOT, etc.)
Which prefix should we use for those version related variables in the
environment files? OECORE_ or POKY_?
-Lianhao
-image-sdk(for yocto 0.9)
or bitbake poky-image-sato-sdk (for current git master), and use the
poky-extract-sdk to extract the corresponding rootfs located in
${TMPDIR}/deploy/images.
Best Regards,
Lianhao
From: Li, Simon
Sent: Wednesday, March 23, 2011 5:27 PM
To: Lu, Lianhao; yocto
Hi Simon,
Before using the poky tree mode, you need to run bitbake meta-ide-support
within the poky tree in a terminal. The eclipse plug-in needs the output of
that to determine several configuration options for cross compilation.
Best Regards,
Lianhao
From: yocto-boun...@yoctoproject.org
Hi fellows,
Does anyone know why bitbake -b .bbfile fails on a newly cloned poky tree,
complaining about the cross-compiler can not be found in the PATH. Does
bitbake -b build the default dependencies?
Best Regards,
-Lianhao Lu
___
yocto mailing
Hi Saul,
I've fixed and resubmitted the patch. Sorry for not following the patch
submission convention.
Best Regards,
-Lianhao
Saul Wold wrote on 2010-12-14:
On 12/13/2010 04:07 AM, Lianhao Lu wrote:
I rebased the previous patch of adding package of environment files
to be compatible with
Hi all,
The attached patch is to create environment file package used by the ADT
installer during ADT installation. This patch should be applied upon my
previous pull request of bug#528 fixing (see the following summary of the
previous pull request):
Pull URL:
Gary Thomas wrote on 2010-11-22:
On 11/22/2010 02:13 AM, Gary Thomas wrote:
I'm interested in trying the Yocto Eclipse plugin with my Poky based builds.
That said, I'm a true Eclipse novice :-(
Does anyone have some guidance on what packages I might need to
install to get a usable Eclipse
Gary Thomas wrote on 2010-11-22:
Thanks, I installed Helios directly from the Eclipse site and that's
working better now. I also installed the components you mention above.
When I try to configure Yocto, I'm trying to use the Poky tree method
but it doesn't like my tree :-( I pointed it
31 matches
Mail list logo