Hi Ricardo,
I'll try that.
Thanks (Obrigado)
Paulo Soeiro
On 6/5/08, Ricardo M. Correia [EMAIL PROTECTED] wrote:
On Ter, 2008-06-03 at 23:33 +0100, Paulo Soeiro wrote:
6)Remove and attached the usb sticks:
zpool status
pool: myPool
state: UNAVAIL
status: One or more devices could not
On Ter, 2008-06-03 at 23:33 +0100, Paulo Soeiro wrote:
6)Remove and attached the usb sticks:
zpool status
pool: myPool
state: UNAVAIL
status: One or more devices could not be used because the label is
missing
or invalid. There are insufficient replicas for the pool to continue
Did the same test again and here is the result:
1)
zpool create myPool mirror c6t0d0p0 c7t0d0p0
2)
-bash-3.2# zfs create myPool/myfs
-bash-3.2# zpool status
pool: myPool
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
myPool ONLINE 0 0 0
mirror ONLINE 0 0 0
This test was done without the hub:
On Tue, Jun 3, 2008 at 11:33 PM, Paulo Soeiro [EMAIL PROTECTED] wrote:
Did the same test again and here is the result:
1)
zpool create myPool mirror c6t0d0p0 c7t0d0p0
2)
-bash-3.2# zfs create myPool/myfs
-bash-3.2# zpool status
pool: myPool
On Jun 3, 2008, at 18:34, Paulo Soeiro wrote:
This test was done without the hub:
FWIW, I bought 9 microSD's and 9 USB controller units for them from
NewEgg to replicate the famous ZFS demo video, and I had problems
getting them working with OpenSolaris (on VMWare on OSX, in this case).
Paulo Soeiro wrote:
Greetings,
I was experimenting with zfs, and i made the following test, i shutdown
the computer during a write operation
in a mirrored usb storage filesystem.
Here is my configuration
NGS USB 2.0 Minihub 4
3 USB Silicom Power Storage Pens 1 GB each
These are the
June 2008 13:19
To: zfs-discuss@opensolaris.org
Subject: Re: [zfs-discuss] ZFS problems with USB Storage devices
Paulo Soeiro wrote:
Greetings,
I was experimenting with zfs, and i made the following test, i shutdown
the computer during a write operation
in a mirrored usb storage filesystem
Justin Vassallo wrote:
Thommy,
If I read correctly your post stated that the pools did not automount on
startup, not that they would go corrupt. It seems to me that Paulo is
actually experiencing a corrupt fs
Nah, I also had indications of corrupted data if you read my posts.
But the data
Greetings,
I was experimenting with zfs, and i made the following test, i shutdown the
computer during a write operation
in a mirrored usb storage filesystem.
Here is my configuration
NGS USB 2.0 Minihub 4
3 USB Silicom Power Storage Pens 1 GB each
These are the ports:
hub devices
