Hello Alberto and Seisan Users,

Happy new year for everyone.

Unfortunately I don´t have any video about obtaining the backazimuth with 
SeisAn but I will try to give you some steps to obtain it.

1. List the wavefile with dirf program.
2. display it with mulplt.
3. Select the three components where it has to be obtained the backazimuth.

4. Select toggle or single trace view mode pressing the "t" (It could be 
selected Z, E or N component). 

5. You can use a filter(z or x or v or b or n or m key) before selecting 
azimuth reading.
6. Press the "h" key in order to enable the azimuth reading.

7. Once the h key has been pressed you have to select a little waveform window 
with the mouse.
8. The selected window has to consider a little of noise (let's say a second of 
this) and the beginning of the P phase (a one or two seconds, It's depends of 
how noisy is the P coda).
9. check out the correlation coefficient in the bottom line on the screen of 
mulplt. It should be greater than zero.

It's possible that you have to repeat the steps 5 to 9 as many times as 
necessary in order to obtain a reliable azimuth.

I hope this can help you.

Regards,
 
Billy Burgoa



________________________________
 De: "[email protected]" <[email protected]>
Para: [email protected] 
Enviado: Sábado, diciembre 31, 2011 10:50 A.M.
Asunto: seisan Digest, Vol 46, Issue 10
 
Today's Topics:

   1. backazimuth
 (Alberto)
   2. Re: mulplt Error Message: Too many samples in seed read
      (Ruben Soares Luís)


----------------------------------------------------------------------

Message: 1
Date: Sat, 31 Dec 2011 16:34:24 +0100
From: "Alberto" <[email protected]>
Subject: [seisan] backazimuth
To: <[email protected]>

Hi,
i don't know to use backazimuth in seisan..
there is a simple tutorial or video example?

Happy new year for all.

Alberto

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/html
Size: 709 bytes
Desc: not available
URL: 
<http://mailman.uib.no/private/seisan/attachments/20111231/d91e7fb9/attachment.txt>

------------------------------

Message: 2
Date: Mon, 19 Dec 2011 01:43:10 -0100
From: Ruben Soares Luís <[email protected]>
Subject: Re: [seisan] mulplt Error Message: Too many samples in seed
    read
To: Branden Christensen <[email protected]>
Cc: [email protected]

Hello Branden,

It seems that the file is not compatible with the
 current miniseed reading
routines. However, I must stress that I have tried to read it using swarm
and it also failed.

Perhaps it is not really miniseed
 standard. What kind of digitizers are you
using? Nanometrics?

I can also tell you that the new miniseed reading routines that are to be
released in the next version of seisan are capable of reading this file as
they use the libraries from Chad Trabant. Please find a converted file in
attachment.

regards,
Ruben

On Sat, Dec 17, 2011 at 8:37 PM, Branden Christensen <
[email protected]> wrote:

> Hello from OSOP in Volcan, Panama:
>
>
> I hope this email finds everyone well.
>
> I have a number of 2.5 MB files I just pulled off a digitizer and dumped
> into the WOR directory.
>
> I am trying to view these with SEISAN's "mulplt" command. At 2.5 MB, all
> of the files have the same size. The trouble is that
 some of them (like the
>
 one attached) cannot be viewed with mulplt. I forward along through the
> archives and then suddenly the mulplt GUI closes and the following error
> message is printed, "Too many samples in seed read". These files are not
> corrupt, as I can open all of them in SEISCOMP3 with "scrttv".
>
> Any ideas? Much appreciated.
>
>
> Kind Regards from a new SEISAN user,
>
> *Branden C. Christensen*
> Director, OSOP
> *[email protected]*
> Volcan, Panama
>
>
>
> _______________________________________________
> seisan mailing list
> [email protected]
> http://mailman.uib.no/listinfo/seisan
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/html
Size: 3167 bytes
Desc: not available
URL: 
<http://mailman.uib.no/private/seisan/attachments/20111219/da8e17be/attachment.txt>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: converted_mseed.out
Type: application/octet-stream
Size: 2449408 bytes
Desc: not available
URL: 
<http://mailman.uib.no/private/seisan/attachments/20111219/da8e17be/attachment.obj>

----------------------------------------------------------------------
Send seisan mailing list
 submissions to
    [email protected]

To subscribe or unsubscribe via the World Wide Web, visit
    http://mailman.uib.no/listinfo/seisan
or, via email, send a message with subject or body 'help' to
    [email protected]

You can reach the person managing the list at
    [email protected]

When replying, please edit your Subject line so it is more specific
than "Re: Contents of seisan
 digest..."


_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan


End of seisan Digest, Vol 46, Issue 10
**************************************
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to