Hello Alberto,

No, The correlation coefficient should be a positive number as i told you in 
the last message. A positive number means a good estimation of the azimuth. 
 
Regards,

Billy Burgoa


________________________________
 De: Alberto <[email protected]>
Para: Billy edson Burgoa Rosso <[email protected]>; [email protected] 
Enviado: Martes, enero 3, 2012 6:51 P.M.
Asunto: Re: [seisan] backazimuth
 

 
the correlation coefficient is always 
negative....why ?
----- Original Message ----- 
>From: Billy edson  Burgoa Rosso 
>To: [email protected] 
>Sent: Tuesday, January 03, 2012 8:41  PM
>Subject: Re: [seisan] backazimuth
>
>
>Hello Alberto and Seisan  Users,
>
>
>Happy new year for  everyone.
>
>
>Unfortunately I don´t have any  video about obtaining the backazimuth with 
>SeisAn but I will try to give you  some steps to obtain it.
>
>
>1. List the wavefile with dirf  program.
>2. display it with  mulplt.
>3. Select the three components  where it has to be obtained the backazimuth.
>
>4. Select toggle or single trace  view mode pressing the "t" (It could be 
>selected Z, E or N component). 
>
>5. You can use a  filter(z or x or v or b or n or m key) before selecting 
>azimuth  reading.
>6. Press the "h" key in  order to enable the azimuth reading.
>
>7. Once the h key has been  pressed you have to select a little waveform 
>window with the  mouse.
>8. The selected window has to  consider a little of noise (let's say a second 
>of this) and the beginning of  the P phase (a one or two seconds, It's depends 
>of how noisy is the P  coda).
>9. check out the correlation  coefficient in the bottom line on  the screen of 
>mulplt. It should be greater than zero.
>
>
>It's possible that you have  to repeat the steps 5 to 9 as many times as 
>necessary in order to obtain a  reliable azimuth.
>
>
>I hope this can help  you.
>
>
>Regards,
> 
>Billy Burgoa
>
>
>
>
>________________________________
> De: "[email protected]"  <[email protected]>
>Para: [email protected] 
>Enviado: Sábado, diciembre 31, 2011 10:50  A.M.
>Asunto: seisan Digest,  Vol 46, Issue 10
>
>Today's Topics:
>
>  1. backazimuth 
  (Alberto)
>  2. Re: mulplt Error Message: Too many samples in seed 
  read
>      (Ruben Soares 
  Luís)
>
>
>----------------------------------------------------------------------
>
>Message: 
  1
>Date: Sat, 31 Dec 2011 16:34:24 +0100
>From: "Alberto" <[email protected]>
>Subject: [seisan] 
  backazimuth
>To: <[email protected]>
>
>Hi,
>i 
  don't know to use backazimuth in seisan..
>there is a simple tutorial or 
  video example?
>
>Happy new year for 
  all.
>
>Alberto
>
>-------------- next part --------------
>A 
  non-text attachment was scrubbed...
>Name: not available
>Type: 
  text/html
>Size: 709 bytes
>Desc: not available
>URL: 
><http://mailman.uib.no/private/seisan/attachments/20111231/d91e7fb9/attachment.txt>
>
>------------------------------
>
>Message: 
  2
>Date: Mon, 19 Dec 2011 01:43:10 -0100
>From: Ruben Soares Luís <[email protected]>
>Subject: 
  Re: [seisan] mulplt Error Message: Too many samples in 
  seed
>    read
>To: Branden Christensen <[email protected]>
>Cc: [email protected]
>
>Hello 
  Branden,
>
>It seems that the file is not compatible with the current 
  miniseed reading
>routines. However, I must stress that I have tried to read 
  it using swarm
>and it also failed.
>
>Perhaps it is not really miniseed 
  standard. What kind of digitizers are you
>using? Nanometrics?
>
>I can 
  also tell you that the new miniseed reading routines that are to 
  be
>released in the next version of seisan are capable of reading this file 
  as
>they use the libraries from Chad Trabant. Please find a converted file 
  in
>attachment.
>
>regards,
>Ruben
>
>On Sat, Dec 17, 2011 at 8:37 
  PM, Branden Christensen <
>[email protected]>  wrote:
>
>> Hello from OSOP in Volcan, Panama:
>>
>>
>> 
  I hope this email finds everyone well.
>>
>> I have a number of 2.5 
  MB files I just pulled off a digitizer and dumped
>> into the WOR 
  directory.
>>
>> I am trying to view these with SEISAN's "mulplt" 
  command. At 2.5 MB, all
>> of the files have the same size. The trouble 
  is that some of them (like the
>> one attached) cannot be viewed with 
  mulplt. I forward along through the
>> archives and then suddenly the 
  mulplt GUI closes and the following error
>> message is printed, "Too 
  many samples in seed read". These files are not
>> corrupt, as I can open 
  all of them in SEISCOMP3 with "scrttv".
>>
>> Any ideas? Much 
  appreciated.
>>
>>
>> Kind Regards from a new SEISAN 
  user,
>>
>> *Branden C. Christensen*
>> Director, OSOP
>> 
  *[email protected]*
>> 
  Volcan, Panama
>>
>>
>>
>> 
  _______________________________________________
>> seisan mailing 
  list
>> [email protected]
>> http://mailman.uib.no/listinfo/seisan
>>
>>
>-------------- 
  next part --------------
>A non-text attachment was scrubbed...
>Name: not 
  available
>Type: text/html
>Size: 3167 bytes
>Desc: not 
  available
>URL: 
><http://mailman.uib.no/private/seisan/attachments/20111219/da8e17be/attachment.txt>
>-------------- 
  next part --------------
>A non-text attachment was scrubbed...
>Name: 
  converted_mseed.out
>Type: application/octet-stream
>Size: 2449408 
  bytes
>Desc: not available
>URL: 
><http://mailman.uib.no/private/seisan/attachments/20111219/da8e17be/attachment.obj>
>
>----------------------------------------------------------------------
>Send 
  seisan mailing list submissions to
>    [email protected]
>
>To subscribe 
  or unsubscribe via the World Wide Web, visit
>    http://mailman.uib.no/listinfo/seisan
>or, via email, send 
  a message with subject or body 'help' to
>    [email protected]
>
>You 
  can reach the person managing the list at
>    [email protected]
>
>When 
  replying, please edit your Subject line so it is more specific
>than "Re: 
  Contents of seisan 
  digest..."
>
>
>_______________________________________________
>seisan 
  mailing list
>[email protected]
>http://mailman.uib.no/listinfo/seisan
>
>
>End of 
  seisan Digest, Vol 46, Issue 
  10
>**************************************
>
>
>
>________________________________
> _______________________________________________
>seisan mailing 
  list
>[email protected]
>http://mailman.uib.no/listinfo/seisan
>
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to