the correlation coefficient is always negative....why ?
  ----- Original Message ----- 
  From: Billy edson Burgoa Rosso 
  To: [email protected] 
  Sent: Tuesday, January 03, 2012 8:41 PM
  Subject: Re: [seisan] backazimuth


  Hello Alberto and Seisan Users,


  Happy new year for everyone.


  Unfortunately I don´t have any video about obtaining the backazimuth with 
SeisAn but I will try to give you some steps to obtain it.


  1. List the wavefile with dirf program.
  2. display it with mulplt.
  3. Select the three components where it has to be obtained the backazimuth.

  4. Select toggle or single trace view mode pressing the "t" (It could be 
selected Z, E or N component). 

  5. You can use a filter(z or x or v or b or n or m key) before selecting 
azimuth reading.
  6. Press the "h" key in order to enable the azimuth reading.

  7. Once the h key has been pressed you have to select a little waveform 
window with the mouse.
  8. The selected window has to consider a little of noise (let's say a second 
of this) and the beginning of the P phase (a one or two seconds, It's depends 
of how noisy is the P coda).
  9. check out the correlation coefficient in the bottom line on the screen of 
mulplt. It should be greater than zero.


  It's possible that you have to repeat the steps 5 to 9 as many times as 
necessary in order to obtain a reliable azimuth.


  I hope this can help you.


  Regards,

  Billy Burgoa




------------------------------------------------------------------------------
  De: "[email protected]" <[email protected]>
  Para: [email protected] 
  Enviado: Sábado, diciembre 31, 2011 10:50 A.M.
  Asunto: seisan Digest, Vol 46, Issue 10

  Today's Topics:

    1. backazimuth (Alberto)
    2. Re: mulplt Error Message: Too many samples in seed read
        (Ruben Soares Luís)


  ----------------------------------------------------------------------

  Message: 1
  Date: Sat, 31 Dec 2011 16:34:24 +0100
  From: "Alberto" <[email protected]>
  Subject: [seisan] backazimuth
  To: <[email protected]>

  Hi,
  i don't know to use backazimuth in seisan..
  there is a simple tutorial or video example?

  Happy new year for all.

  Alberto

  -------------- next part --------------
  A non-text attachment was scrubbed...
  Name: not available
  Type: text/html
  Size: 709 bytes
  Desc: not available
  URL: 
<http://mailman.uib.no/private/seisan/attachments/20111231/d91e7fb9/attachment.txt>

  ------------------------------

  Message: 2
  Date: Mon, 19 Dec 2011 01:43:10 -0100
  From: Ruben Soares Luís <[email protected]>
  Subject: Re: [seisan] mulplt Error Message: Too many samples in seed
      read
  To: Branden Christensen <[email protected]>
  Cc: [email protected]

  Hello Branden,

  It seems that the file is not compatible with the current miniseed reading
  routines. However, I must stress that I have tried to read it using swarm
  and it also failed.

  Perhaps it is not really miniseed standard. What kind of digitizers are you
  using? Nanometrics?

  I can also tell you that the new miniseed reading routines that are to be
  released in the next version of seisan are capable of reading this file as
  they use the libraries from Chad Trabant. Please find a converted file in
  attachment.

  regards,
  Ruben

  On Sat, Dec 17, 2011 at 8:37 PM, Branden Christensen <
  [email protected]> wrote:

  > Hello from OSOP in Volcan, Panama:
  >
  >
  > I hope this email finds everyone well.
  >
  > I have a number of 2.5 MB files I just pulled off a digitizer and dumped
  > into the WOR directory.
  >
  > I am trying to view these with SEISAN's "mulplt" command. At 2.5 MB, all
  > of the files have the same size. The trouble is that some of them (like the
  > one attached) cannot be viewed with mulplt. I forward along through the
  > archives and then suddenly the mulplt GUI closes and the following error
  > message is printed, "Too many samples in seed read". These files are not
  > corrupt, as I can open all of them in SEISCOMP3 with "scrttv".
  >
  > Any ideas? Much appreciated.
  >
  >
  > Kind Regards from a new SEISAN user,
  >
  > *Branden C. Christensen*
  > Director, OSOP
  > *[email protected]*
  > Volcan, Panama
  >
  >
  >
  > _______________________________________________
  > seisan mailing list
  > [email protected]
  > http://mailman.uib.no/listinfo/seisan
  >
  >
  -------------- next part --------------
  A non-text attachment was scrubbed...
  Name: not available
  Type: text/html
  Size: 3167 bytes
  Desc: not available
  URL: 
<http://mailman.uib.no/private/seisan/attachments/20111219/da8e17be/attachment.txt>
  -------------- next part --------------
  A non-text attachment was scrubbed...
  Name: converted_mseed.out
  Type: application/octet-stream
  Size: 2449408 bytes
  Desc: not available
  URL: 
<http://mailman.uib.no/private/seisan/attachments/20111219/da8e17be/attachment.obj>

  ----------------------------------------------------------------------
  Send seisan mailing list submissions to
      [email protected]

  To subscribe or unsubscribe via the World Wide Web, visit
      http://mailman.uib.no/listinfo/seisan
  or, via email, send a message with subject or body 'help' to
      [email protected]

  You can reach the person managing the list at
      [email protected]

  When replying, please edit your Subject line so it is more specific
  than "Re: Contents of seisan digest..."


  _______________________________________________
  seisan mailing list
  [email protected]
  http://mailman.uib.no/listinfo/seisan


  End of seisan Digest, Vol 46, Issue 10
  **************************************





------------------------------------------------------------------------------


  _______________________________________________
  seisan mailing list
  [email protected]
  http://mailman.uib.no/listinfo/seisan
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to