Hi Antonio, All folder names have 5 and only 5 digits just like you wrote. Thanks for the observation.
Kind regards, Emanuel Antunes 2012/10/3 AAbrego <[email protected]> > Hello Emanuel: > > Have you try folder names with 5 digits? For instance JMI__ or RUND_. I > think these folder need to have 5 characters. > > Regards, > > Antonio Abrego > > > > Enviado desde Samsung Mobile > > > -------- Mensaje original -------- > Subject: Re: [seisan] Unable to access WAV subfolders... > De: Emanuel Antunes <[email protected]> > A: Branden Christensen <[email protected]> > CC: "[email protected]" <[email protected]> > > > Branden: > > Thanks for the suggestion. I had tried that before, I did that now and it > works just fine. As I had mentioned, the only problem is when I try to > access waveform files that are inside a subdirectory of WAV or WOR. For > instance, doing > > eev 200301 JMI > > or > > eev 200301 RUND > > (JMI and RUND are databases given in the SEISAN test data available at the > website) > > yields no results, that is, it never gets to plot the waveforms, it even > opens the window to select channels or stations but it doesn't get past > that, when the time comes to show the waveform it simply returns to the eev > prompt. If I copy some of the waveforms from JMI or RUND to the WAV or WOR > directory I am able to plot just fine. I have no clue what may be wrong. > > Kind and grateful regards, > > Emanuel A. > > 2012/10/3 Branden Christensen <[email protected]<mailto: > [email protected]>> > Emanuel: > > > Let's confirm if things compiled correctly. I typically do so by running > the following test: > > eev 199606 TEST > > The output should be: > > 1996 6 Reading events from base TEST_ 2 > > **** WARN: specified file does not exist **** > /home/brando/seismo/REA/REA.LOG > **** **** > No data base log file, now make it > Data base log file updated with a new data base > # 1 3 Jun 1996 19:55 35 D 47.760 153.227 0.0 N 1.1 5.6WHRV 12 ? > > Hit p and let us know if a plot is returned. > > > B > > Branden C. Christensen > Director, OSOP > [email protected]<mailto:[email protected]> > www.osop.com.pa<http://www.osop.com.pa> > Volcan, Panama > [ > https://lh6.googleusercontent.com/-bviEnZQwR1c/TyFjLS3_c-I/AAAAAAAAA34/QkVFwd3oAu4/w405-h150-k/OSOP.png > ] > > [X] > > > > On Wed, Oct 3, 2012 at 11:25 AM, Emanuel Antunes < > [email protected]<mailto:[email protected]>> wrote: > Greetings again, > > I should also mention that before I reinstalled Linux I had Seisan 9.1 > working with no problems, and that's the thing that bothers me the most. I > can't find the cause of the problem. > > To try to make it clearer, when I am in "eev" in the terminal (accessing a > database that has the waveform files inside a subdirectory in either WAV or > WOR), I use the "p" command for a certain event, seisan show's me all the > available options and everything goes well until right after the "Low and > high cut for filter, return for no filter" prompt. After this nothing is > shown and it returns to the usual "eev" prompt of the events. > > Once again, thanks in advance for your help. > > > Kind regards, > > > Emanuel Antunes > > > 2012/10/3 Emanuel Antunes <[email protected]<mailto: > [email protected]>> > Dear all, > > > I’m a novice SEISAN user. Following a reinstall of Linux OS on my box, I > reinstalled SEISAN (the latest available version), ran through the usual > configuration, but I am running into a few awkward problems. I have spent > too much time trying to understand what the issue is and now I resort to > your collective expertise hoping you could shed some light into the matter. > > To put is simply, when I run eev from the command line, I am unable to > plot any wave forms that are inside any subfolder inside either WAV or WOR > directories. I can access the S-files in the REA subdirectories with no > problem. I have tried this for many of the test databases and the pattern > continues to show. Strangely if I copy the waveform files directly to the > WAV or WOR directory, I can use the plot command with no problem, and pick > phases and do all the usual tasks. This is a problem as I have months of > data to analyze, I can’t afford to copy all the files to the WAV or WOR > directory and have the database in a mess! > Furthermore, I installed SEISAN in Mac OS X and the observed behavior is > exactly the same. > > Could anyone please help me out? I would be very grateful. > > Much obliged for your care and attention, > > > Best regards, > > > Emanuel Antunes > > > _______________________________________________ > seisan mailing list > [email protected]<mailto:[email protected]> > http://mailman.uib.no/listinfo/seisan > > > >
_______________________________________________ seisan mailing list [email protected] http://mailman.uib.no/listinfo/seisan
