Hi,

if I understand correctly, you can plot with option '1' and probably 'return' for single trace mode, but when you use default plotting '0' mulplt jumps out. This may indicate a problem with the default channel selection, can you check what you have configured in MULPLT.DEF. Normally, if none of the default channels are found in your data, it should plot all. Perhaps you can configure one channel as default, and see if that changes anything. Also check the default filter setting.

Lars

On 2012-10-04 03:48, Emanuel Antunes wrote:
Dear Lars,

I have tried running mulplt directly, the behaviour is the same as when
I run the "p" command from "eev". I am able to plot whatever is outside
a subfolder, but nothing that is inside a subfolder of WAV or WOR gets
plotted. However, I discovered a quite peculiar idiosyncrasy, it might
shed some light as to the source of the symptoms:

Here is some output from the console when I ran "mulplt". I will add the
result of the program behavior in <<THIS FASHION>>, my input is in *this
format*.

eantunes@XXXXX:~/Documents/XxxXXX/SEISAN/WAV$ *mulplt*

   Filename, number, filenr.lis (all)

   Continuous SEISAN data base: cont

   Large SEED volume: conts

   Bud archive: bud

   SEISCOMP archive: scp

   Make a choice

*MOZ01/2011/04/2011-04-03-0135-32S.NSN___024*

  Read headers from files:

  MOZ01/2011/04/2011-04-03-0135-32S.NSN___024

   Plot options: Interactive picking          Return

                 Multi trace plot on screen, def (0)

                 Multi trace plot on screen      (1)

                 Multi trace plot on screen+laser(2)

                 Multi trace plot on laser       (3)

                 Continuoues on screen           (4)

                 Continuoues on screen + laser   (5)

                 Continuoues on laser            (6)

                 Stop                            (q)

*0*

   Low and high cut for filter, return for no filter


<<SEISAN PLOTS THE WAVEFILE>>

<< If I select option (1): SEISAN Opens the Select Channel X-Window, as
soon as I hit "o" (for OK), it plots the wavefile>>


eantunes@XXXXX:~/Documents/XxxXXX/SEISAN/WAV$ mulplt

   Filename, number, filenr.lis (all)

   Continuous SEISAN data base: cont

   Large SEED volume: conts

   Bud archive: bud

   SEISCOMP archive: scp

   Make a choice

*2011-04-03-0135-32S.NSN___024 *

  Read headers from files:

  
/home/eantunes/Documents/XxxXXX/SEISAN/WAV/MOZ01/2011/04/2011-04-03-0135-32S.NSN

   Plot options: Interactive picking          Return

                 Multi trace plot on screen, def (0)

                 Multi trace plot on screen      (1)

                 Multi trace plot on screen+laser(2)

                 Multi trace plot on laser       (3)

                 Continuoues on screen           (4)

                 Continuoues on screen + laser   (5)

                 Continuoues on laser            (6)

                 Stop                            (q)

*0*

   Low and high cut for filter, return for no filter


<< I hit enter and SEISAN escapes to the terminal prompt without showing
no window>>

<< If I select option (1): SEISAN Opens the Select Channel X-Window, as
soon as I hit "o" (for OK), no matter the selection it returns to the
terminal prompt, just like in "eev">>


It seems that seisan is indeed having trouble accessing the folders even
though it reads the correct path... What could be causing this?

As you can see my x-graphics environment is working well, otherwise I
wouldn't be able to plot for the other cases. I use bash and I am
certain SEISAN.bash is loaded as I have all the aliases and Paths working.

Thank you very much for your help and care.

Best wishes,

Emanuel Antunes


2012/10/3 <[email protected] <mailto:[email protected]>>

    Hi Emanuel,

    you can also try to run mulplt directly from the shell prompt for a
    waveform file rather than starting it from eev.

    Please also check that your x-graphics are working, e.g. try to
    start xclock.

    What you see could also be related to the shell, which one are you
    using? Do you load the corresponding SEISAN.bash/csh file?

    Regards,
    Lars


    Siterer Billy edson Burgoa Rosso <[email protected]
    <mailto:[email protected]>>:


        Dear Emanuel,

        I would verify if I have access to read the directories or
        waveforms that are in WAV or WOR (command ls -l to check them ).
        Do you get any messages when you run eev for some event and you
        try to plot it? if you get a message similar like this one:

        No such file: 2011-11-22-1837-33S.NSN___335___MSEED
           No waveform files found, return to continue


        and the waveform file is inside the directory then you don't
        have access to read it, you must modify the permissions (or it
        could be that the waveform isn't inside the directory!) .


        I would also try to solve this problem recompiling SeisAn;
        remember that the precompiled version is for a specific LINUX
        flavor (let's say CentOS...not sure about this). For compiling
        SeisAn you should have to set the enviroment variables in
        ~/my_seisan_basedir/COM/__SEISAN.bash and then you have to go to
        LIB directory and execute "make clean" then "make all". Finally,
        go to the PRO and execute the last two commands.

        Regards,



        Billy Burgoa


        __________________________________
          De: "[email protected]
        <mailto:[email protected]>" <[email protected]
        <mailto:[email protected]>>
        Para: [email protected] <mailto:[email protected]>
        Enviado: Miércoles, 3 de octubre, 2012 12:40 P.M.
        Asunto: seisan Digest, Vol 56, Issue 1

        Today's Topics:

            1. Unable to access WAV subfolders... (Emanuel Antunes)
            2. Re: Unable to access WAV subfolders... (Emanuel Antunes)
            3. Re: Unable to access WAV subfolders... (Branden Christensen)
            4. Re: Unable to access WAV subfolders... (Emanuel Antunes)
            5. Re: Unable to access WAV subfolders... (Branden Christensen)


        
------------------------------__------------------------------__----------

        Message: 1
        Date: Wed, 3 Oct 2012 11:42:14 +0100
        From: Emanuel Antunes <[email protected]
        <mailto:[email protected]>>
        Subject: [seisan] Unable to access WAV subfolders...
        To: [email protected] <mailto:[email protected]>

        Dear all,


        I?m a novice SEISAN user. Following a reinstall of Linux OS on
        my box, I reinstalled SEISAN (the latest available version), ran
        through the usual configuration, but I am running into a few
        awkward problems. I have spent too much time trying to
        understand what the issue is and now I resort to your collective
        expertise hoping you could shed some light into the matter.

        To put is simply, when I run eev from the command line, I am
        unable to plot any wave forms that are inside any subfolder
        inside either WAV or WOR directories. I can access the S-files
        in the REA subdirectories with no problem. I have tried this for
        many of the test databases and the pattern continues to show.
        Strangely if I copy the waveform files directly to the WAV or
        WOR directory, I can use the plot command with no problem, and
        pick phases and do all the usual tasks. This is a problem as I
        have months of data to analyze, I can?t afford to copy all the
        files to the WAV or WOR directory and have the database in a mess!
        Furthermore, I installed SEISAN in Mac OS X and the observed
        behavior is exactly the same.

        Could anyone please help me out? I would be very grateful.

        Much obliged for your care and attention,


        Best regards,


        Emanuel Antunes


        ------------------------------

        Message: 2
        Date: Wed, 3 Oct 2012 12:25:18 +0100
        From: Emanuel Antunes <[email protected]
        <mailto:[email protected]>>
        Subject: Re: [seisan] Unable to access WAV subfolders...
        To: [email protected] <mailto:[email protected]>

        Greetings again,

        I should also mention that before I reinstalled Linux I had
        Seisan 9.1
        working with no problems, and that's the thing that bothers me
        the most. I
        can't find the cause of the problem.

        To try to make it clearer, when I am in "eev" in the terminal
        (accessing a
        database that has the waveform files inside a subdirectory in
        either WAV or
        WOR), I use the "p" command for a certain event, seisan show's
        me all the
        available options and everything goes well until right after the
        "Low and
        high cut for filter, return for no filter" prompt. After this
        nothing is
        shown and it returns to the usual "eev" prompt of the events.

        Once again, thanks in advance for your help.


        Kind regards,


        Emanuel Antunes

        2012/10/3 Emanuel Antunes <[email protected]
        <mailto:[email protected]>>

            Dear all,


            I?m a novice SEISAN user. Following a reinstall of Linux OS
            on my box, I
            reinstalled SEISAN (the latest available version), ran
            through the usual
            configuration, but I am running into a few awkward problems.
            I have spent
            too much time trying to understand what the issue is and now
            I resort to
            your collective expertise hoping you could shed some light
            into the matter.

            To put is simply, when I run eev from the command line, I am
            unable to
            plot any wave forms that are inside any subfolder inside
            either WAV or WOR
            directories. I can access the S-files in the REA
            subdirectories with no
            problem. I have tried this for many of the test databases
            and the pattern
            continues to show. Strangely if I copy the waveform files
            directly to the
            WAV or WOR directory, I can use the plot command with no
            problem, and pick
            phases and do all the usual tasks. This is a problem as I
            have months of
            data to analyze, I can?t afford to copy all the files to the
            WAV or WOR
            directory and have the database in a mess!
            Furthermore, I installed SEISAN in Mac OS X and the observed
            behavior is
            exactly the same.

            Could anyone please help me out? I would be very grateful.

            Much obliged for your care and attention,


            Best regards,


            Emanuel Antunes

        -------------- next part --------------
        A non-text attachment was scrubbed...
        Name: not available
        Type: text/html
        Size: 2418 bytes
        Desc: not available
        URL:
        
<http://mailman.uib.no/__private/seisan/attachments/__20121003/82be3f76/attachment.__txt
        
<http://mailman.uib.no/private/seisan/attachments/20121003/82be3f76/attachment.txt>>

        ------------------------------

        Message: 3
        Date: Wed, 3 Oct 2012 11:29:11 +0000
        From: Branden Christensen <[email protected].__pa
        <mailto:[email protected]>>
        Subject: Re: [seisan] Unable to access WAV subfolders...
        To: Emanuel Antunes <[email protected]
        <mailto:[email protected]>>
        Cc: [email protected] <mailto:[email protected]>

        Emanuel:


        Good day.

        I am not a Seisan expert but it would seem to me that when you moved
        your installation you failed to copy over your ../DAT/SEISAN.DEF
        file where
        your WAVEFORM_BASE's are defined.


        Kind Regards,

        *Branden C. Christensen*
        Director, OSOP
        *[email protected].__pa
        <mailto:[email protected]>*
        www.osop.com.pa <http://www.osop.com.pa>
        Volcan, Panama





        On Wed, Oct 3, 2012 at 10:42 AM, Emanuel Antunes
        <[email protected]
        <mailto:[email protected]>>__wrote:

            Dear all,


            I?m a novice SEISAN user. Following a reinstall of Linux OS
            on my box, I
            reinstalled SEISAN (the latest available version), ran
            through the usual
            configuration, but I am running into a few awkward problems.
            I have spent
            too much time trying to understand what the issue is and now
            I resort to
            your collective expertise hoping you could shed some light
            into the matter.

            To put is simply, when I run eev from the command line, I am
            unable to
            plot any wave forms that are inside any subfolder inside
            either WAV or WOR
            directories. I can access the S-files in the REA
            subdirectories with no
            problem. I have tried this for many of the test databases
            and the pattern
            continues to show. Strangely if I copy the waveform files
            directly to the
            WAV or WOR directory, I can use the plot command with no
            problem, and pick
            phases and do all the usual tasks. This is a problem as I
            have months of
            data to analyze, I can?t afford to copy all the files to the
            WAV or WOR
            directory and have the database in a mess!
            Furthermore, I installed SEISAN in Mac OS X and the observed
            behavior is
            exactly the same.

            Could anyone please help me out? I would be very grateful.

            Much obliged for your care and attention,


            Best regards,


            Emanuel Antunes
            _________________________________________________
            seisan mailing list
            [email protected] <mailto:[email protected]>
            http://mailman.uib.no/__listinfo/seisan
            <http://mailman.uib.no/listinfo/seisan>

        -------------- next part --------------
        A non-text attachment was scrubbed...
        Name: not available
        Type: text/html
        Size: 3619 bytes
        Desc: not available
        URL:
        
<http://mailman.uib.no/__private/seisan/attachments/__20121003/53471cb5/attachment.__txt
        
<http://mailman.uib.no/private/seisan/attachments/20121003/53471cb5/attachment.txt>>

        ------------------------------

        Message: 4
        Date: Wed, 3 Oct 2012 12:49:20 +0100
        From: Emanuel Antunes <[email protected]
        <mailto:[email protected]>>
        Subject: Re: [seisan] Unable to access WAV subfolders...
        To: Branden Christensen <[email protected].__pa
        <mailto:[email protected]>>
        Cc: [email protected] <mailto:[email protected]>

        Branden,

        Thank you for your swift reply. Unfortunately that doesn't seem
        to be the
        issue, on my previous installation I hadn't altered the default
        SEISAN.DEF
        file and it was running well for the tasks I was performing
        (mainly phase
        picking and location of seismic events). Furthermore, the
        SEISAN.DEF has
        the correct WAVEFORM_BASE's defined for the test databases and
        still they
        don't work properly. I checked with a colleague who is also
        using SEISAN
        here at the lab and her SEISAN.DEF is just the same as mine and
        she has no
        trouble with SEISAN.

        This strange behavior only happened with my switch from Ubuntu
        from Debian.
        Also, Mac OS X (10.6) is showing the same strange symptoms.

        Thanks again for your suggestion.

        Best wishes,

        Emanuel A.

        2012/10/3 Branden Christensen <[email protected].__pa
        <mailto:[email protected]>>

            Emanuel:


            Good day.

            I am not a Seisan expert but it would seem to me that when
            you moved
            your installation you failed to copy over your
            ../DAT/SEISAN.DEF file where
            your WAVEFORM_BASE's are defined.


            Kind Regards,

            *Branden C. Christensen*
            Director, OSOP
            *[email protected].__pa
            <mailto:[email protected]>*
            www.osop.com.pa <http://www.osop.com.pa>
            Volcan, Panama





            On Wed, Oct 3, 2012 at 10:42 AM, Emanuel Antunes <
            [email protected]
            <mailto:[email protected]>> wrote:

                Dear all,


                I?m a novice SEISAN user. Following a reinstall of Linux
                OS on my box, I
                reinstalled SEISAN (the latest available version), ran
                through the usual
                configuration, but I am running into a few awkward
                problems. I have spent
                too much time trying to understand what the issue is and
                now I resort to
                your collective expertise hoping you could shed some
                light into the matter.

                To put is simply, when I run eev from the command line,
                I am unable to
                plot any wave forms that are inside any subfolder inside
                either WAV or WOR
                directories. I can access the S-files in the REA
                subdirectories with no
                problem. I have tried this for many of the test
                databases and the pattern
                continues to show. Strangely if I copy the waveform
                files directly to the
                WAV or WOR directory, I can use the plot command with no
                problem, and pick
                phases and do all the usual tasks. This is a problem as
                I have months of
                data to analyze, I can?t afford to copy all the files to
                the WAV or WOR
                directory and have the database in a mess!
                Furthermore, I installed SEISAN in Mac OS X and the
                observed behavior is
                exactly the same.

                Could anyone please help me out? I would be very grateful.

                Much obliged for your care and attention,


                Best regards,


                Emanuel Antunes
                _________________________________________________
                seisan mailing list
                [email protected] <mailto:[email protected]>
                http://mailman.uib.no/__listinfo/seisan
                <http://mailman.uib.no/listinfo/seisan>



        -------------- next part --------------
        A non-text attachment was scrubbed...
        Name: not available
        Type: text/html
        Size: 4734 bytes
        Desc: not available
        URL:
        
<http://mailman.uib.no/__private/seisan/attachments/__20121003/3d1a6134/attachment.__txt
        
<http://mailman.uib.no/private/seisan/attachments/20121003/3d1a6134/attachment.txt>>

        ------------------------------

        Message: 5
        Date: Wed, 3 Oct 2012 12:39:22 +0000
        From: Branden Christensen <[email protected].__pa
        <mailto:[email protected]>>
        Subject: Re: [seisan] Unable to access WAV subfolders...
        To: Emanuel Antunes <[email protected]
        <mailto:[email protected]>>
        Cc: [email protected] <mailto:[email protected]>

        Emanuel:


        Let's confirm if things compiled correctly. I typically do so by
        running
        the following test:

        eev 199606 TEST

        The output should be:

        1996  6 Reading events from base TEST_  2

        **** WARN: specified file does not exist           ****
                    /home/brando/seismo/REA/REA.__LOG
        ****                                               ****
           No data base log file, now make it
           Data base log file updated with a new data base
        #    1  3 Jun 1996 19:55 35  D  47.760 153.227  0.0  N 1.1
        5.6WHRV   12  ?

        Hit p and let us know if a plot is returned.


        B

        *Branden C. Christensen*
        Director, OSOP
        *[email protected].__pa
        <mailto:[email protected]>*
        www.osop.com.pa <http://www.osop.com.pa>
        Volcan, Panama





        On Wed, Oct 3, 2012 at 11:25 AM, Emanuel Antunes
        <[email protected]
        <mailto:[email protected]>>__wrote:

            Greetings again,

            I should also mention that before I reinstalled Linux I had
            Seisan 9.1
            working with no problems, and that's the thing that bothers
            me the most. I
            can't find the cause of the problem.

            To try to make it clearer, when I am in "eev" in the
            terminal (accessing a
            database that has the waveform files inside a subdirectory
            in either WAV or
            WOR), I use the "p" command for a certain event, seisan
            show's me all the
            available options and everything goes well until right after
            the "Low and
            high cut for filter, return for no filter" prompt. After
            this nothing is
            shown and it returns to the usual "eev" prompt of the events.

            Once again, thanks in advance for your help.


            Kind regards,


            Emanuel Antunes


            2012/10/3 Emanuel Antunes <[email protected]
            <mailto:[email protected]>>

                Dear all,


                I?m a novice SEISAN user. Following a reinstall of Linux
                OS on my box, I
                reinstalled SEISAN (the latest available version), ran
                through the usual
                configuration, but I am running into a few awkward
                problems. I have spent
                too much time trying to understand what the issue is and
                now I resort to
                your collective expertise hoping you could shed some
                light into the matter.

                To put is simply, when I run eev from the command line,
                I am unable to
                plot any wave forms that are inside any subfolder inside
                either WAV or WOR
                directories. I can access the S-files in the REA
                subdirectories with no
                problem. I have tried this for many of the test
                databases and the pattern
                continues to show. Strangely if I copy the waveform
                files directly to the
                WAV or WOR directory, I can use the plot command with no
                problem, and pick
                phases and do all the usual tasks. This is a problem as
                I have months of
                data to analyze, I can?t afford to copy all the files to
                the WAV or WOR
                directory and have the database in a mess!
                Furthermore, I installed SEISAN in Mac OS X and the
                observed behavior is
                exactly the same.

                Could anyone please help me out? I would be very grateful.

                Much obliged for your care and attention,


                Best regards,


                Emanuel Antunes




            _________________________________________________
            seisan mailing list
            [email protected] <mailto:[email protected]>
            http://mailman.uib.no/__listinfo/seisan
            <http://mailman.uib.no/listinfo/seisan>


        -------------- next part --------------
        A non-text attachment was scrubbed...
        Name: not available
        Type: text/html
        Size: 5283 bytes
        Desc: not available
        URL:
        
<http://mailman.uib.no/__private/seisan/attachments/__20121003/75723a16/attachment.__txt
        
<http://mailman.uib.no/private/seisan/attachments/20121003/75723a16/attachment.txt>>

        
------------------------------__------------------------------__----------
        Send seisan mailing list submissions to
        [email protected] <mailto:[email protected]>

        To subscribe or unsubscribe via the World Wide Web, visit
        http://mailman.uib.no/__listinfo/seisan
        <http://mailman.uib.no/listinfo/seisan>
        or, via email, send a message with subject or body 'help' to
        [email protected] <mailto:[email protected]>

        You can reach the person managing the list at
        [email protected] <mailto:[email protected]>

        When replying, please edit your Subject line so it is more specific
        than "Re: Contents of seisan digest..."


        _________________________________________________
        seisan mailing list
        [email protected] <mailto:[email protected]>
        http://mailman.uib.no/__listinfo/seisan
        <http://mailman.uib.no/listinfo/seisan>


        End of seisan Digest, Vol 56, Issue 1
        ******************************__*******



    _________________________________________________
    seisan mailing list
    [email protected] <mailto:[email protected]>
    http://mailman.uib.no/__listinfo/seisan
    <http://mailman.uib.no/listinfo/seisan>



--
Lars Ottemøller
Associate Professor
Department of Earth Science
University of Bergen
Allegt. 41
5007 Bergen
NORWAY
Phone +47 5558 2616

_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to