Dear Emanuel,
I would verify if I have access to read the directories or waveforms that are
in WAV or WOR (command ls -l to check them ). Do you get any messages when you
run eev for some event and you try to plot it? if you get a message similar
like this one:
No such file: 2011-11-22-1837-33S.NSN___335_MSEED
No waveform files found, return to continue
and the waveform file is inside the directory then you don't have access to
read it, you must modify the permissions (or it could be that the waveform
isn't inside the directory!) .
I would also try to solve this problem recompiling SeisAn; remember that the
precompiled version is for a specific LINUX flavor (let's say CentOS...not sure
about this). For compiling SeisAn you should have to set the enviroment
variables in ~/my_seisan_basedir/COM/SEISAN.bash and then you have to go to LIB
directory and execute "make clean" then "make all". Finally, go to the PRO and
execute the last two commands.
Regards,
Billy Burgoa
________________________________
De: "[email protected]" <[email protected]>
Para: [email protected]
Enviado: Miércoles, 3 de octubre, 2012 12:40 P.M.
Asunto: seisan Digest, Vol 56, Issue 1
Today's Topics:
1. Unable to access WAV subfolders... (Emanuel Antunes)
2. Re: Unable to access WAV subfolders... (Emanuel Antunes)
3. Re: Unable to access WAV subfolders... (Branden Christensen)
4. Re: Unable to access WAV subfolders... (Emanuel Antunes)
5. Re: Unable to access WAV subfolders... (Branden Christensen)
----------------------------------------------------------------------
Message: 1
Date: Wed, 3 Oct 2012 11:42:14 +0100
From: Emanuel Antunes <[email protected]>
Subject: [seisan] Unable to access WAV subfolders...
To: [email protected]
Dear all,
I?m a novice SEISAN user. Following a reinstall of Linux OS on my box, I
reinstalled SEISAN (the latest available version), ran through the usual
configuration, but I am running into a few awkward problems. I have spent too
much time trying to understand what the issue is and now I resort to your
collective expertise hoping you could shed some light into the matter.
To put is simply, when I run eev from the command line, I am unable to plot any
wave forms that are inside any subfolder inside either WAV or WOR directories.
I can access the S-files in the REA subdirectories with no problem. I have
tried this for many of the test databases and the pattern continues to show.
Strangely if I copy the waveform files directly to the WAV or WOR directory, I
can use the plot command with no problem, and pick phases and do all the usual
tasks. This is a problem as I have months of data to analyze, I can?t afford to
copy all the files to the WAV or WOR directory and have the database in a mess!
Furthermore, I installed SEISAN in Mac OS X and the observed behavior is
exactly the same.
Could anyone please help me out? I would be very grateful.
Much obliged for your care and attention,
Best regards,
Emanuel Antunes
------------------------------
Message: 2
Date: Wed, 3 Oct 2012 12:25:18 +0100
From: Emanuel Antunes <[email protected]>
Subject: Re: [seisan] Unable to access WAV subfolders...
To: [email protected]
Greetings again,
I should also mention that before I reinstalled Linux I had Seisan 9.1
working with no problems, and that's the thing that bothers me the most. I
can't find the cause of the problem.
To try to make it clearer, when I am in "eev" in the terminal (accessing a
database that has the waveform files inside a subdirectory in either WAV or
WOR), I use the "p" command for a certain event, seisan show's me all the
available options and everything goes well until right after the "Low and
high cut for filter, return for no filter" prompt. After this nothing is
shown and it returns to the usual "eev" prompt of the events.
Once again, thanks in advance for your help.
Kind regards,
Emanuel Antunes
2012/10/3 Emanuel Antunes <[email protected]>
> Dear all,
>
>
> I?m a novice SEISAN user. Following a reinstall of Linux OS on my box, I
> reinstalled SEISAN (the latest available version), ran through the usual
> configuration, but I am running into a few awkward problems. I have spent
> too much time trying to understand what the issue is and now I resort to
> your collective expertise hoping you could shed some light into the matter.
>
> To put is simply, when I run eev from the command line, I am unable to
> plot any wave forms that are inside any subfolder inside either WAV or WOR
> directories. I can access the S-files in the REA subdirectories with no
> problem. I have tried this for many of the test databases and the pattern
> continues to show. Strangely if I copy the waveform files directly to the
> WAV or WOR directory, I can use the plot command with no problem, and pick
> phases and do all the usual tasks. This is a problem as I have months of
> data to analyze, I can?t afford to copy all the files to the WAV or WOR
> directory and have the database in a mess!
> Furthermore, I installed SEISAN in Mac OS X and the observed behavior is
> exactly the same.
>
> Could anyone please help me out? I would be very grateful.
>
> Much obliged for your care and attention,
>
>
> Best regards,
>
>
> Emanuel Antunes
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/html
Size: 2418 bytes
Desc: not available
URL:
<http://mailman.uib.no/private/seisan/attachments/20121003/82be3f76/attachment.txt>
------------------------------
Message: 3
Date: Wed, 3 Oct 2012 11:29:11 +0000
From: Branden Christensen <[email protected]>
Subject: Re: [seisan] Unable to access WAV subfolders...
To: Emanuel Antunes <[email protected]>
Cc: [email protected]
Emanuel:
Good day.
I am not a Seisan expert but it would seem to me that when you moved
your installation you failed to copy over your ../DAT/SEISAN.DEF file where
your WAVEFORM_BASE's are defined.
Kind Regards,
*Branden C. Christensen*
Director, OSOP
*[email protected]*
www.osop.com.pa
Volcan, Panama
On Wed, Oct 3, 2012 at 10:42 AM, Emanuel Antunes
<[email protected]>wrote:
> Dear all,
>
>
> I?m a novice SEISAN user. Following a reinstall of Linux OS on my box, I
> reinstalled SEISAN (the latest available version), ran through the usual
> configuration, but I am running into a few awkward problems. I have spent
> too much time trying to understand what the issue is and now I resort to
> your collective expertise hoping you could shed some light into the matter.
>
> To put is simply, when I run eev from the command line, I am unable to
> plot any wave forms that are inside any subfolder inside either WAV or WOR
> directories. I can access the S-files in the REA subdirectories with no
> problem. I have tried this for many of the test databases and the pattern
> continues to show. Strangely if I copy the waveform files directly to the
> WAV or WOR directory, I can use the plot command with no problem, and pick
> phases and do all the usual tasks. This is a problem as I have months of
> data to analyze, I can?t afford to copy all the files to the WAV or WOR
> directory and have the database in a mess!
> Furthermore, I installed SEISAN in Mac OS X and the observed behavior is
> exactly the same.
>
> Could anyone please help me out? I would be very grateful.
>
> Much obliged for your care and attention,
>
>
> Best regards,
>
>
> Emanuel Antunes
> _______________________________________________
> seisan mailing list
> [email protected]
> http://mailman.uib.no/listinfo/seisan
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/html
Size: 3619 bytes
Desc: not available
URL:
<http://mailman.uib.no/private/seisan/attachments/20121003/53471cb5/attachment.txt>
------------------------------
Message: 4
Date: Wed, 3 Oct 2012 12:49:20 +0100
From: Emanuel Antunes <[email protected]>
Subject: Re: [seisan] Unable to access WAV subfolders...
To: Branden Christensen <[email protected]>
Cc: [email protected]
Branden,
Thank you for your swift reply. Unfortunately that doesn't seem to be the
issue, on my previous installation I hadn't altered the default SEISAN.DEF
file and it was running well for the tasks I was performing (mainly phase
picking and location of seismic events). Furthermore, the SEISAN.DEF has
the correct WAVEFORM_BASE's defined for the test databases and still they
don't work properly. I checked with a colleague who is also using SEISAN
here at the lab and her SEISAN.DEF is just the same as mine and she has no
trouble with SEISAN.
This strange behavior only happened with my switch from Ubuntu from Debian.
Also, Mac OS X (10.6) is showing the same strange symptoms.
Thanks again for your suggestion.
Best wishes,
Emanuel A.
2012/10/3 Branden Christensen <[email protected]>
> Emanuel:
>
>
> Good day.
>
> I am not a Seisan expert but it would seem to me that when you moved
> your installation you failed to copy over your ../DAT/SEISAN.DEF file where
> your WAVEFORM_BASE's are defined.
>
>
> Kind Regards,
>
> *Branden C. Christensen*
> Director, OSOP
> *[email protected]*
> www.osop.com.pa
> Volcan, Panama
>
>
>
>
>
> On Wed, Oct 3, 2012 at 10:42 AM, Emanuel Antunes <
> [email protected]> wrote:
>
>> Dear all,
>>
>>
>> I?m a novice SEISAN user. Following a reinstall of Linux OS on my box, I
>> reinstalled SEISAN (the latest available version), ran through the usual
>> configuration, but I am running into a few awkward problems. I have spent
>> too much time trying to understand what the issue is and now I resort to
>> your collective expertise hoping you could shed some light into the matter.
>>
>> To put is simply, when I run eev from the command line, I am unable to
>> plot any wave forms that are inside any subfolder inside either WAV or WOR
>> directories. I can access the S-files in the REA subdirectories with no
>> problem. I have tried this for many of the test databases and the pattern
>> continues to show. Strangely if I copy the waveform files directly to the
>> WAV or WOR directory, I can use the plot command with no problem, and pick
>> phases and do all the usual tasks. This is a problem as I have months of
>> data to analyze, I can?t afford to copy all the files to the WAV or WOR
>> directory and have the database in a mess!
>> Furthermore, I installed SEISAN in Mac OS X and the observed behavior is
>> exactly the same.
>>
>> Could anyone please help me out? I would be very grateful.
>>
>> Much obliged for your care and attention,
>>
>>
>> Best regards,
>>
>>
>> Emanuel Antunes
>> _______________________________________________
>> seisan mailing list
>> [email protected]
>> http://mailman.uib.no/listinfo/seisan
>>
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/html
Size: 4734 bytes
Desc: not available
URL:
<http://mailman.uib.no/private/seisan/attachments/20121003/3d1a6134/attachment.txt>
------------------------------
Message: 5
Date: Wed, 3 Oct 2012 12:39:22 +0000
From: Branden Christensen <[email protected]>
Subject: Re: [seisan] Unable to access WAV subfolders...
To: Emanuel Antunes <[email protected]>
Cc: [email protected]
Emanuel:
Let's confirm if things compiled correctly. I typically do so by running
the following test:
eev 199606 TEST
The output should be:
1996 6 Reading events from base TEST_ 2
**** WARN: specified file does not exist ****
/home/brando/seismo/REA/REA.LOG
**** ****
No data base log file, now make it
Data base log file updated with a new data base
# 1 3 Jun 1996 19:55 35 D 47.760 153.227 0.0 N 1.1 5.6WHRV 12 ?
Hit p and let us know if a plot is returned.
B
*Branden C. Christensen*
Director, OSOP
*[email protected]*
www.osop.com.pa
Volcan, Panama
On Wed, Oct 3, 2012 at 11:25 AM, Emanuel Antunes
<[email protected]>wrote:
> Greetings again,
>
> I should also mention that before I reinstalled Linux I had Seisan 9.1
> working with no problems, and that's the thing that bothers me the most. I
> can't find the cause of the problem.
>
> To try to make it clearer, when I am in "eev" in the terminal (accessing a
> database that has the waveform files inside a subdirectory in either WAV or
> WOR), I use the "p" command for a certain event, seisan show's me all the
> available options and everything goes well until right after the "Low and
> high cut for filter, return for no filter" prompt. After this nothing is
> shown and it returns to the usual "eev" prompt of the events.
>
> Once again, thanks in advance for your help.
>
>
> Kind regards,
>
>
> Emanuel Antunes
>
>
> 2012/10/3 Emanuel Antunes <[email protected]>
>
>> Dear all,
>>
>>
>> I?m a novice SEISAN user. Following a reinstall of Linux OS on my box, I
>> reinstalled SEISAN (the latest available version), ran through the usual
>> configuration, but I am running into a few awkward problems. I have spent
>> too much time trying to understand what the issue is and now I resort to
>> your collective expertise hoping you could shed some light into the matter.
>>
>> To put is simply, when I run eev from the command line, I am unable to
>> plot any wave forms that are inside any subfolder inside either WAV or WOR
>> directories. I can access the S-files in the REA subdirectories with no
>> problem. I have tried this for many of the test databases and the pattern
>> continues to show. Strangely if I copy the waveform files directly to the
>> WAV or WOR directory, I can use the plot command with no problem, and pick
>> phases and do all the usual tasks. This is a problem as I have months of
>> data to analyze, I can?t afford to copy all the files to the WAV or WOR
>> directory and have the database in a mess!
>> Furthermore, I installed SEISAN in Mac OS X and the observed behavior is
>> exactly the same.
>>
>> Could anyone please help me out? I would be very grateful.
>>
>> Much obliged for your care and attention,
>>
>>
>> Best regards,
>>
>>
>> Emanuel Antunes
>
>
>
> _______________________________________________
> seisan mailing list
> [email protected]
> http://mailman.uib.no/listinfo/seisan
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/html
Size: 5283 bytes
Desc: not available
URL:
<http://mailman.uib.no/private/seisan/attachments/20121003/75723a16/attachment.txt>
----------------------------------------------------------------------
Send seisan mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.uib.no/listinfo/seisan
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of seisan digest..."
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
End of seisan Digest, Vol 56, Issue 1
*************************************
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan