Martijn, This is interesting that you have success. What more can I share regards to my config? I don't think the missing empty line is really the issue.
Trevor -----Original Message----- From: Martijn Brinkers [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 27, 2008 2:29 PM To: James Users List Cc: Vance, Trevor K. Subject: RE: A problem with uuencoded attachments Sending a uuencoded message seems to work with my setup. What I still don't get is why there is not an empty line (ie only CR-LF) between subject and body? see your log Martijn On Wed, 2008-08-27 at 16:53 -0400, Vance, Trevor K. wrote: > >From: Martijn Brinkers > >Sent: Wednesday, August 27, 2008 1:44 PM > >To: James Users List > >Cc: Vance, Trevor K. > >Subject: RE: A problem with uuencoded attachments > > > >Could you sent a complete example message? > > > >The example DATA portion (below) you show seems not to separate the > headers and body. Is that > >intentional? > > > >Martijn Brinkers > > I was only showing a portion of the conversation. Here's the entire > output. > > Regards, > Trevor > > > Checking option -attach > Checking option -uuencode > Blat v2.6.2 w/GSS encryption (build : Feb 25 2007 12:06:19) > > Checking option -to > Checking option -subject > Checking option -attach > Checking option -uuencode > superDebug: init_winsock(), WSAStartup() returned 0 (?) > superDebug: Hostname <localhost> resolved to ip address 127.0.0.1 > superDebug: Official hostname is [munged] > superDebug: Attempting to connect to ip address 127.0.0.1 > superDebug: Received 102 bytes: > 220 [munged] SMTP Server (JAMES SMTP Server 2.3.1) ready Wed, 27 Aug > 2008 15:44:18 -0400 (EDT) > <<<getline<<< 220 [munged] SMTP Server (JAMES SMTP Server 2.3.1) ready > Wed, 27 Aug 2008 15:44:18 -0400 (EDT) > superDebug: Attempting to send 39 bytes: > EHLO [munged] > >>>putline>>> EHLO [munged] > superDebug: Received 124 bytes: > 250-[munged] Hello [munged] (127.0.0.1 [127.0.0.1]) 250-PIPELINING 250 > ENHANCEDSTATUSCODES <<<getline<<< 250-[munged] Hello [munged] > (127.0.0.1 [127.0.0.1]) <<<getline<<< 250-PIPELINING <<<getline<<< 250 > ENHANCEDSTATUSCODES Sending test.txt to tvance[munged] > Subject: test1 > Login name is tvance[munged] > Attached binary file: test.txt > superDebug: Attempting to send 38 bytes: > MAIL FROM:<[EMAIL PROTECTED]> > >>>putline>>> MAIL FROM:<[EMAIL PROTECTED]> > superDebug: Received 48 bytes: > 250 2.1.0 Sender <[EMAIL PROTECTED]> OK > <<<getline<<< 250 2.1.0 Sender <[EMAIL PROTECTED]> OK > superDebug: Attempting to send 36 bytes: > RCPT TO:<[EMAIL PROTECTED]> > >>>putline>>> RCPT TO:<[EMAIL PROTECTED]> > superDebug: Received 51 bytes: > 250 2.1.5 Recipient <[EMAIL PROTECTED]> OK <<<getline<<< 250 2.1.5 > Recipient <[EMAIL PROTECTED]> OK > superDebug: Attempting to send 6 bytes: > DATA > >>>putline>>> DATA > superDebug: Received 44 bytes: > 354 Ok Send data ending with <CRLF>.<CRLF> <<<getline<<< 354 Ok Send > data ending with <CRLF>.<CRLF> > superDebug: Attempting to send 323 bytes: > Date: Wed, 27 Aug 2008 15:44:18 -0400 > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > X-Mailer: Blat v2.6.2 w/GSS encryption, a Win32 SMTP/NNTP mailer > http://www.blat.net > Message-ID: <[EMAIL PROTECTED]> > Subject: test1 > test > begin 644 test.txt > &=&5S=`T* > ` > end > . > superDebug: Received 28 bytes: > 250 2.6.0 Message received > <<<getline<<< 250 2.6.0 Message received > superDebug: Attempting to send 6 bytes: > QUIT > >>>putline>>> QUIT > superDebug: Received 63 bytes: > 221 2.0.0 [munged] Service closing transmission channel <<<getline<<< > 221 2.0.0 [munged] Service closing transmission channel > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]