I'm trying to setup STN 2.1.3 to connect to my office LAN via dialup. I get the modem connection but never get any traffic through. I have tried setting "Remote Addr" to "127.99.99.2" with no success. I have looked at the debug screen and everything looks fine until after I get the modem connection. The debug screen reads: pppd[82]: Connect: ppp0 <--> /dev/cua2 pppd[82]: Sent [LCP ConfReq id=0x5 <asyncmap=0x0> <magic 0x3407dd4d> <pcomp> <sccomp>] pppd[82]: LCP: Timeout sending Config-Requests pppd[82]: Connection terminated I have two ways of dialing in, one is NT4.0 RAS and the other is a Digi PortServerII. I can connect to both of these with Windows Dial-up Networking but not STN. STN behaves the same with both connections. Any ideas? Thanks, Chris -- Visit http://www.ShareTheNet.com for info about ShareTheNet Visit http://www.topica.com/lists/sharethenet for info about this list ______________________________________________ Faster, stronger and able to send millions of emails in one click: the new Topica site! http://www.topica.com/t/14
