Do you mean a frame relay? Do you connect with a bridge or a router? If
you connect with a bridge, you can connect an ethernet hub to the
bridge, plug the four workstations into the hub and assign the
appropriate IP address to each workstation. You would then plug the STN
box into the hub and configure it normally.
Zoran Ristov wrote:
>
> Is there a way to combine fixed ip routing and NAT working
> togather with STN?
> Say, I have IP frame with 8 IP addresses, 3 of them are
> used for net and broadcast addresses, and five I can route
> to my workstations. Is it possible to route four of them,
> and to use fifth with translation to connect other wotkstations.
>
> Cheers
> --
> Visit http://www.ShareTheNet.com for info about ShareTheNet
> Visit http://www.topica.com/lists/sharethenet for info about this list
> ___________________________________________________________
> T O P I C A The Email You Want. http://www.topica.com/t/16
> Newsletters, Tips and Discussions on Your Favorite Topics
--
Visit http://www.ShareTheNet.com for info about ShareTheNet
Visit http://www.topica.com/lists/sharethenet for info about this list
___________________________________________________________
T O P I C A The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics
