If the outside temp reached 100 degrees, the temp inside your trunk probably reached 150 degrees and that could have been your problem.
-------Original Message-------
Date: Tuesday, August 26, 2003 11:20:09 AM
Subject: RE: ShopTalk: SA 2000 contact info
I have a question regarding SA2000, which is my primary adhesive. After using a blowtorch to remove heads bonded with SA2000, I have noticed a residue of whitish crystals on the shaft. A few days ago there was a failure on two irons. An eight iron flew off the shaft and into a lake and a seven iron head could be twisted off easily by hand. On the seven-iron shaft I did not notice any residue. The shaft looked as if part A had been applied and was ready for Part B. I did of course use Part B.
Can anyone tell me what might have happened? The clubs had been stored in the trunk of a car on a day in which we broke 100 degrees.
TIA,
Hunter
As I see a post every now and then regarding this product, I wanted to forward some info I just received.
I just received a letter from David Bushman. They have relocated to SC and are looking to more aggressively market SA 2000.
They are in relations with CA Plus he notes.
701 Kingsbridge Rd
Columbia SC 29210
803-798-8661
He noted he is hoping to have a prescence at the PCS show in March. He also sent his appreciation for those that kept tracking him down through his many moves.
There are MSDS and TDS forms online.
Mark A Patton
|