Dave, This was the reading when the club was ready to be used. Yes the head mounted, done, completed.:-) The measurement was taken with the Club Scout III. Am I missing something here? This would not be the true reading? Pat McGoldrick--On Target Golf [EMAIL PROTECTED] ----- Original Message ----- From: "Dave Tutelman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, September 28, 2003 1:30 PM Subject: Re: ShopTalk: FUJIKURA PRO VISTA 60
> At 12:56 PM 9/28/03 -0400, [EMAIL PROTECTED] wrote: > >That torq reading is the finished club. > >Pat McGoldrick--On Target Golf > > Pat, > You say it was the finished club. I assume you mean that, and not the cut > shaft. The finished club means the head was mounted when you measured it. > > How did you measure that 6.2* torque? In particular, did you use a > frequency (like the Club Scout does) to measure the torque? If you did, > then the presence of the head in addition to the torque clamp will increase > the moment of inertia -- so the measured torque will be higher than the > actual torsional flexibility of the shaft. > > So maybe it isn't quite that high a torque. > > Cheers! > DaveT > > >
