LLH and DAVE
Yes that’s definitely true that the CF both bends the shaft forward AND pulls the shaft back in an attempt to straighten the shaft at the same time. I wonder which one wins?
TOM
-----Original Message-----
Dave said:
> With a COG rear of center (ie, w/any normal drive) you should see > forward bending at impact with any properly fitted shaft. How much > forward bending should be determined by how far back the COG of the > driver head is. Even more so it depends on club head speed because that is what generates the centrifugal force pulling the head down and also on tip flex. A soft tip will be more affected. It is interesting the manufacturers keep putting the weight back in the club head to help the average player get the ball up but the average player does not have the club head speed to generate the centrifugal force to flex the shaft
llhack.
Lloyd Hackman EarthLink Revolves Around You.
|
- RE: ShopTalk: Shaft Quality and Bend Profiles Tom Wishon
- Re: ShopTalk: Shaft Quality and Bend Profiles Lloyd Hackman
- Re: ShopTalk: Shaft Quality and Bend Profiles Burgess Howell
- Re: ShopTalk: Shaft Quality and Bend Profiles Connie Mack Rea
- Re: ShopTalk: Shaft Quality and Bend Profiles Alan Brooks
- Re: ShopTalk: Shaft Quality and Bend Profiles Lloyd Hackman
- Re: ShopTalk: Shaft Quality and Bend Profiles Lloyd Hackman
- Re: ShopTalk: Shaft Quality and Bend Profiles Burgess Howell
- Re: ShopTalk: Shaft Quality and Bend Profiles Lloyd Hackman
- Re: ShopTalk: Shaft Quality and Bend Profiles Alan Brooks
- RE: ShopTalk: Shaft Quality and Bend Profiles Tom Wishon