Not dumb...yes, 180g and they're removable. I'll probably eventually
offer 1g and 3g screws but not with the first batch.
John
Probably a dumb question, but does 190g with two 5g screws mean the
weight without the screws would be 180g and, if so, are the screws
removable?
Thanks.
John McGrath
On 10/15/10 12:22 PM, j...@clubmaker-online.com wrote:
I'm kicking off the new lightweight senior clubhead that I'm
offering at Clubmaker Online. I'm calling it the Traverse HiCor.
It's two piece cast with forged face. 190g (with two 5 g screws).
Square face angle and 58 deg lie. I'm going with a non-conforming
version in 10 and 12 deg, will probably add a conforming version in
the Spring.
I built mine to 46.75" with a 59g UST AXIVCore Blue shaft and 35g
grip and have been blasting it. I typically play and Stiff flex but
went R flex with the superlight head.
I've got a lightweight Graphite Design YSQ 45 and YSQ 55 I'm going
to try to see if it can beat the current combination.
It's a nice, quality head. I'd compare it to the Nakashima cast
heads. In fact, the foundry does work for some high end Japanese
OEM's.
I'm doing a preorder special, regular price is going to be
$159 less $50 for the preorder ($109). Probably looking at 45 days
or so for shipment.
I'm marketing it to Seniors and ladies but even though the face is
quite thin (2.2mm) it should hold up to 110 mph swings (mine is 103
and no problems after 6 weeks or so).
http://www.clubmaker-online.com/seniorclubhead.html
--
Shoptalk ** Sponsored by the new Aldila Voodoo.
Learn more at http://aldilavoodoo.com/
--
Thanks!
John Muir
skype: jhmuir
AIM: golfcas...@mac.com
810.923.7396
http://clubmaker-online.com
http://gripscience.com
clubmaker.mobi
golf equipment updates at http://twitter.com/golfcast
sponsored by Aldila Voodoo
http://aldilavoodoo.com
--
Shoptalk ** Sponsored by the new Aldila Voodoo.
Learn more at http://aldilavoodoo.com/