Bernie. I got your message OK. It must be on Dave's end.
Dave,
Isn’t it easier to find a spine by manually FLOing and marking the shaft,
then using a CD with cross-hairs and slightly enlarged center hole to mark
the other 3 points, since you say the spine is always 90° from the NBP and I
should find FLO at all 4 points? At least, I’ve found this to generally be
true. Since I have an NF4, I then can slip the shaft into the V-notch on the
center bearing arm to measure the two planes and get my DD flex measurement
to see which is which .
Now, once I’ve found the true NBP and spine locations by manually FLOing the
shaft, could I use my NF2 with a similarly notched center bearing arm to get
reasonably accurate flex measurement? I realize the measurement is unique to
my NF2, but will it give me a number that’s good enough for shaft matching
and my own shaft records?
Bernie
bl...@charter.net
-----Original Message-----
From: Bernie Baymiller
Sent: Monday, February 28, 2011 7:59 PM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: New article[s] on my web site
Dave,
Geez, what caused that wierd character stuff. Would it be some kind of
encoding choice?
I looked at my Mail options and saw it was set up for Western European (ISO)
whatever that means. So, I changed it to Western European (Windows) whatever
that means. Are you still getting the crazy characters?
Bernie
bl...@charter.net
-----Original Message-----
From: Dave Tutelman
Sent: Monday, February 28, 2011 6:14 PM
To: ShopTalk@mail.msen.com
Cc: spinetalkersfo...@yahoogroups.com ; NeuFinder Forum
Subject: Re: ShopTalk: New article[s] on my web site
Hi Bernie.
Your post has some very strange characters in it?
I occasionally see that, but I don't know what
causes it. Seems to be directly related to some
webmail client. Anyway, enough about form; back to matters of substance.
At 02:48 PM 2/28/2011, Bernie Baymiller wrote:
Isn’t it easier to find a spine by manually
FLOing and marking the shaft, then using a CD
with cross-hairs and slightly enlarged center
hole to mark the other 3 points, since you say
the spine is always 90° from the NBP and I
should find FLO at all 4 points? At least,
I’ve found this to generally be true. Since I
have an NF4, I then can slip the shaft into the
V-notch on the center bearing arm to measure the
two planes and get my DD flex measurement to see which is which .
Absolutely correct.
And many who can do FLO have a frequency meter
along with the clamp and tip weight, so they can
use that to see which is which.
Now, once I’ve found the true NBP and spine
locations by manually FLOing the shaft, could I
use my NF2 with a similarly notched center
bearing arm to get reasonably accurate flex
measurement? I realize the measurement is unique
to my NF2, but will it give me a number that’s
good enough for shaft matching and my own shaft records?
Well, sorta'. If you're willing to accept the errors due to:
* Residual bend.
* Shaft taper.
* Steps in the shaft.
All of these affect the stiffness reading. Even
if you are measuring stiffness against your own
private standard (and, with an NF2, you would
be), these can still introduce errors. That is,
shafts with identical stiffness could give
different readings due to these geometrical conditions.
Cheers!
DaveT
--
Shoptalk ** Sponsored by the new Aldila Voodoo.
Learn more at http://aldilavoodoo.com/
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.872 / Virus Database: 271.1.1/3466 - Release Date: 02/24/11
14:34:00
--
Shoptalk ** Sponsored by the new Aldila Voodoo.
Learn more at http://aldilavoodoo.com/
--
Shoptalk ** Sponsored by the new Aldila Voodoo.
Learn more at http://aldilavoodoo.com/
