Too much acetone! Moisten paper towel patch and give a quick wipe in direction 
I gave.
I have written to a friend for the name of the waxy nail hole filler. Did a 
search and could not find the info. to help you.
It's not the weight of the hammer alone!
You must be able to swing the hammer and strike hard!
I have access to a 10 pound sledge hammer but can't swing it while holding the 
stamp!

 then wiping basically the whole shootin’ match off with the acetone leaving a 
bit of color all over the back of the iron head. 




-----Original Message-----
From: John Muir <j...@clubmaker-online.com>
To: ShopTalk <ShopTalk@mail.msen.com>
Sent: Fri, Apr 11, 2014 3:25 pm
Subject: Re: ShopTalk: Paint fill for irons


Not to give you hammer envy, Arnie, but mine is a 4 pounder. lol. I’m globbing 
the testors paint around the stamping, letting it dry, then wiping basically 
the whole shootin’ match off with the acetone leaving a bit of color all over 
the back of the iron head. 
John

On Apr 11, 2014, at 4:31 PM, arniescl...@aol.com wrote:


You must make your stampings deeper! Use a heavy hammer (mine is a 3 pound 
"drill hammer") strike the stamp ONLY ONCE and HARD! The "paint sticks" you are 
looking for are used to fill small nail holes as in picture frame making. You 
rub the stamping with the waxy paint stick and wipe with a dry paper towel (no 
solvent) the stamp must still be deep.
Check craft stores for the paint sticks. 
Also when you do your current wipe use  less acetone, less pressure and rub 
across the stamped line so as to not remove the paint in the stamping.


-----Original Message-----
From: John Muir <j...@clubmaker-online.com>
To: ShopTalk <ShopTalk@mail.msen.com>
Sent: Fri, Apr 11, 2014 1:18 pm
Subject: ShopTalk: Paint fill for irons


Golfworks (and maybe Golfsmith?) used to sell paint sticks to fill iron 
stampings that were more like a crayon than acrylic paint sticks they sell now. 
I’m stamping/ paint filling some wedges and the acrylic paint tends to want to 
disappear when I try and clean up the area around the stamping with acetone. 
Any ideas?



John Muir
clubmaker-online.com
810.923.7396












By the way, I send out weekly information  on new golf equipment called The 
Clubmaker Report. Would you like me to add your email to it? Send me a quick 
note if yes.


Thanks!

John Muir
clubmaker-online.com
810.923.7396









Reply via email to