Dear JaMa, I've changed also to your testing repo.
I've seen the following things: First the downsides: 2.6.37 seems to be more critical on bad blocks in NAND. With 2.6.34 I used the NAND both with ubifs and jffs without any issues. Now with 2.6.37 I'll get error message like "ecc checksum error", I/O errors and so on. I had to change to boot from SD Card to get testing working No power button LED lights to indicate charging or full GTA02 suspends even though USB cable is plugged in as Neil already mentioned. Also Illumne Battery applet doesn't indicate state "loading" anymore I still can't dim the backlight down via settings -> Power -> Backlight. There is seems that there is only backlight on/off included But there is a big plus: Battery usage went down a lot. 12 h of Standby took me only 8% Battery capacity. Working things: GPS, Telephony, SMS As I'll changed from NAND to SD card I can't say anything about performance.. Regards, Sebastian _______________________________________________ Shr-devel mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-devel
